| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The SimpleSAMLphp SAML2 library is a PHP library for SAML2 related functionality. Prior to versions 4.17.0 and 5.0.0-alpha.20, there is a signature confusion attack in the HTTPRedirect binding. An attacker with any signed SAMLResponse via the HTTP-Redirect binding can cause the application to accept an unsigned message. Versions 4.17.0 and 5.0.0-alpha.20 contain a fix for the issue. |
| MSI Center before 2.0.52.0 has Missing PE Signature Validation. |
| Deck Mate 2's firmware update mechanism accepts packages without cryptographic signature verification, encrypts them with a single hard-coded AES key shared across devices, and uses a truncated HMAC for integrity validation. Attackers with access to the update interface - typically via the unit's USB update port - can craft or modify firmware packages to execute arbitrary code as root, allowing persistent compromise of the device's integrity and deck randomization process. Physical or on-premises access remains the most likely attack path, though network-exposed or telemetry-enabled deployments could theoretically allow remote exploitation if misconfigured. The vendor confirmed that firmware updates have been issued to correct these update-chain weaknesses and that USB update access has been disabled on affected units. |
| Deck Mate 1 executes firmware directly from an external EEPROM without verifying authenticity or integrity. An attacker with physical access can replace or reflash the EEPROM to run arbitrary code that persists across reboots. Because this design predates modern secure-boot or signed-update mechanisms, affected systems should be physically protected or retired from service. The vendor has not indicated that firmware updates are available for this legacy model. |
| A potential vulnerability was reported in the Lenovo 510 FHD and Performance FHD web cameras that could allow an attacker with physical access to write arbitrary firmware updates to the device over a USB connection. |
| OpenPGP.js is a JavaScript implementation of the OpenPGP protocol. Startinf in version 5.0.1 and prior to versions 5.11.3 and 6.1.1, a maliciously modified message can be passed to either `openpgp.verify` or `openpgp.decrypt`, causing these functions to return a valid signature verification result while returning data that was not actually signed. This flaw allows signature verifications of inline (non-detached) signed messages (using `openpgp.verify`) and signed-and-encrypted messages (using `openpgp.decrypt` with `verificationKeys`) to be spoofed, since both functions return extracted data that may not match the data that was originally signed. Detached signature verifications are not affected, as no signed data is returned in that case. In order to spoof a message, the attacker needs a single valid message signature (inline or detached) as well as the plaintext data that was legitimately signed, and can then construct an inline-signed message or signed-and-encrypted message with any data of the attacker's choice, which will appear as legitimately signed by affected versions of OpenPGP.js. In other words, any inline-signed message can be modified to return any other data (while still indicating that the signature was valid), and the same is true for signed+encrypted messages if the attacker can obtain a valid signature and encrypt a new message (of the attacker's choice) together with that signature. The issue has been patched in versions 5.11.3 and 6.1.1. Some workarounds are available. When verifying inline-signed messages, extract the message and signature(s) from the message returned by `openpgp.readMessage`, and verify the(/each) signature as a detached signature by passing the signature and a new message containing only the data (created using `openpgp.createMessage`) to `openpgp.verify`. When decrypting and verifying signed+encrypted messages, decrypt and verify the message in two steps, by first calling `openpgp.decrypt` without `verificationKeys`, and then passing the returned signature(s) and a new message containing the decrypted data (created using `openpgp.createMessage`) to `openpgp.verify`. |
| Node-SAML is a SAML library not dependent on any frameworks that runs in Node. In versions 5.0.1 and below, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. This issue is fixed in version 5.1.0. |
| A SAML library not dependent on any frameworks that runs in Node. In version 5.0.1, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. To conduct the attack an attacker would need a validly signed document from the identity provider (IdP). This is fixed in version 5.1.0. |
| Constellation is the first Confidential Kubernetes. The Constellation CVM image uses LUKS2-encrypted volumes for persistent storage. When opening an encrypted storage device, the CVM uses the libcryptsetup function crypt_activate_by_passhrase. If the VM is successful in opening the partition with the disk encryption key, it treats the volume as confidential. However, due to the unsafe handling of null keyslot algorithms in the cryptsetup 2.8.1, it is possible that the opened volume is not encrypted at all. Cryptsetup prior to version 2.8.1 does not report an error when processing LUKS2-formatted disks that use the cipher_null-ecb algorithm in the keyslot encryption field. This vulnerability is fixed in 2.24.0. |
| ALTCHA is privacy-first software for captcha and bot protection. A cryptographic semantic binding flaw in ALTCHA libraries allows challenge payload splicing, which may enable replay attacks. The HMAC signature does not unambiguously bind challenge parameters to the nonce, allowing an attacker to reinterpret a valid proof-of-work submission with a modified expiration value. This may allow previously solved challenges to be reused beyond their intended lifetime, depending on server-side replay handling and deployment assumptions. The vulnerability primarily impacts abuse-prevention mechanisms such as rate limiting and bot mitigation. It does not directly affect data confidentiality or integrity. This issue has been addressed by enforcing explicit semantic separation between challenge parameters and the nonce during HMAC computation. Users are advised to upgrade to patched versions, which include version 1.0.0 of the altcha Golang package, version 1.0.0 of the altcha Rubygem, version 1.0.0 of the altcha pip package, version 1.0.0 of the altcha Erlang package, version 1.4.1 of the altcha-lib npm package, version 1.3.1 of the altcha-org/altcha Composer package, and version 1.3.0 of the org.altcha:altcha Maven package. As a mitigation, implementations may append a delimiter to the end of the `salt` value prior to HMAC computation (for example, `<salt>?expires=<time>&`). This prevents ambiguity between parameters and the nonce and is backward-compatible with existing implementations, as the delimiter is treated as a standard URL parameter separator. |
| Laravel Reverb provides a real-time WebSocket communication backend for Laravel applications. Prior to 1.4.0, there is an issue where verification signatures for requests sent to Reverb's Pusher-compatible API were not being verified. This API is used in scenarios such as broadcasting a message from a backend service or for obtaining statistical information (such as number of connections) about a given channel. This issue only affects the Pusher-compatible API endpoints and not the WebSocket connections themselves. In order to exploit this vulnerability, the application ID which, should never be exposed, would need to be known by an attacker. This vulnerability is fixed in 1.4.0. |
| An insufficiently secured internal function allows session generation for arbitrary users. The decodeParam function checks the JWT but does not verify which signing algorithm was used. As a result, an attacker can use the "ex:action" parameter in the VerifyUserByThrustedService function to generate a session for any user. |
| MinIO is a High Performance Object Storage released under GNU Affero General Public License v3.0. The signature component of the authorization may be invalid, which would mean that as a client you can use any arbitrary secret to upload objects given the user already has prior WRITE permissions on the bucket. Prior knowledge of access-key, and bucket name this user might have access
to - and an access-key with a WRITE permissions is necessary. However with relevant information in place, uploading random objects to buckets is trivial and easy via curl. This issue is fixed in RELEASE.2025-04-03T14-56-28Z. |
| The firmware upgrade function in the admin web interface of the Rittal IoT Interface & CMC III Processing Unit devices checks if
the patch files are signed before executing the containing run.sh
script. The signing process is kind of an HMAC with a long string as key
which is hard-coded in the firmware and is freely available for
download. This allows crafting malicious "signed" .patch files in order
to compromise the device and execute arbitrary code. |
| Applications that use spring-boot-loader or spring-boot-loader-classic and contain custom code that performs signature verification of nested jar files may be vulnerable to signature forgery where content that appears to have been signed by one signer has, in fact, been signed by another. |
| xml-crypto is an xml digital signature and encryption library for Node.js. In affected versions the default configuration does not check authorization of the signer, it only checks the validity of the signature per section 3.2.2 of the w3 xmldsig-core-20080610 spec. As such, without additional validation steps, the default configuration allows a malicious actor to re-sign an XML document, place the certificate in a `<KeyInfo />` element, and pass `xml-crypto` default validation checks. As a result `xml-crypto` trusts by default any certificate provided via digitally signed XML document's `<KeyInfo />`. `xml-crypto` prefers to use any certificate provided via digitally signed XML document's `<KeyInfo />` even if library was configured to use specific certificate (`publicCert`) for signature verification purposes. An attacker can spoof signature verification by modifying XML document and replacing existing signature with signature generated with malicious private key (created by attacker) and by attaching that private key's certificate to `<KeyInfo />` element. This vulnerability is combination of changes introduced to `4.0.0` on pull request 301 / commit `c2b83f98` and has been addressed in version 6.0.0 with pull request 445 / commit `21201723d`. Users are advised to upgrade. Users unable to upgrade may either check the certificate extracted via `getCertFromKeyInfo` against trusted certificates before accepting the results of the validation or set `xml-crypto's getCertFromKeyInfo` to `() => undefined` forcing `xml-crypto` to use an explicitly configured `publicCert` or `privateKey` for signature verification. |
| A flaw was found in osbuild-composer. A condition can be triggered that disables GPG verification for package repositories, which can expose the build phase to a Man-in-the-Middle attack, allowing untrusted code to be installed into an image being built. |
| An issue in D-Link COVR 1100, 1102, 1103 AC1200 Dual-Band Whole-Home Mesh Wi-Fi System (Hardware Rev B1) truncates Wireless Access Point Passwords (WPA-PSK) allowing an attacker to gain unauthorized network access via weak authentication controls. |
| Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.4.0, Ed25519 signature verification accepts forged non-canonical signatures where the scalar S is not reduced modulo the group order (`S >= L`). A valid signature and its `S + L` variant both verify in forge, while Node.js `crypto.verify` (OpenSSL-backed) rejects the `S + L` variant, as defined by the specification. This class of signature malleability has been exploited in practice to bypass authentication and authorization logic (see CVE-2026-25793, CVE-2022-35961). Applications relying on signature uniqueness (i.e., dedup by signature bytes, replay tracking, signed-object canonicalization checks) may be bypassed. Version 1.4.0 patches the issue. |
| Botan is a C++ cryptography library. From version 3.0.0 to before version 3.11.0, during X509 path validation, OCSP responses were checked for an appropriate status code, but critically omitted verifying the signature of the OCSP response itself. This issue has been patched in version 3.11.0. |
