| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Zephyr's Bluetooth Classic Hands-Free Profile (HFP) Hands-Free role parser (subsys/bluetooth/host/classic/hfp_hf.c) contains an out-of-bounds write. During Service Level Connection setup the HF sends AT+CIND=? and parses the AG's +CIND: response in cind_handle(), which assigns a per-entry counter index and calls cind_handle_values() for each list element. cind_handle_values() then wrote hf-ind_table[index] = i without verifying that index is within the 20-element int8_t ind_table[] array of struct bt_hfp_hf. Because the parser places no cap on the number of +CIND: list entries, a remote Attendant Gateway (a malicious, compromised, or spoofed peer the device connects to over Bluetooth) can send a response with more than 20 recognized indicator entries and drive index arbitrarily large, writing a small attacker-positioned value past the array into adjacent struct fields (feature masks, SDP/version state, the calls[] array, work/atomic bookkeeping) and potentially beyond the static connection pool slot. This yields memory corruption and at least denial of service of the Bluetooth host, triggered by a single malformed AT response with no user interaction. The sibling consumer ag_indicator_handle_values() already performed the equivalent bounds check; this commit adds the same index = ARRAY_SIZE(hf-ind_table) guard to close the gap. Affects builds with CONFIG_BT_HFP_HF enabled; introduced with the original HFP HF CIND parser (~v1.7) and present through v4.4.0. |
| An out-of-bounds write vulnerability [CWE-787] vulnerability in Fortinet FortiWeb 8.0.0 through 8.0.3, FortiWeb 7.6.0 through 7.6.6, FortiWeb 7.4.0 through 7.4.11 may allow a remote privileged attacker to execute arbitrary code or command via crafted HTTP requests. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: prevent preemption of oopsing TASK_DEAD task
When an already-exiting task oopses, make_task_dead() currently calls
do_task_dead() with preemption enabled. That is forbidden:
do_task_dead() calls __schedule(), which has a comment saying "WARNING:
must be called with preemption disabled!".
If an oopsing task is preempted in do_task_dead(), between becoming
TASK_DEAD and entering the scheduler explicitly, bad things happen:
finish_task_switch() assumes that once the scheduler has switched away
from a TASK_DEAD task, the task can never run again and its stack is no
longer needed; but that assumption apparently doesn't hold if the dead
task was preempted (the SM_PREEMPT case).
This means that the scheduler ends up repeatedly dropping references on
the dead task's stack, which can lead to use-after-free or double-free
of the entire task stack; in other words, two tasks can end up running
on the same stack, resulting in various kinds of memory corruption.
(This does not just affect "recursively oopsing" tasks; it is enough to
oops once during task exit, for example in a file_operations::release
handler) |
| LibreOffice can import EMF+ graphics, which may be embedded in documents. A heap buffer overflow existed when importing an EMF+ gradient brush. The number of gradient blend points was read from the file and used to compute an allocation size, but that multiplication could overflow, so a small buffer was allocated and then filled as if it were large, writing past its end. In fixed versions the blend-point count is checked against the data actually available before allocating. |
| LibreOffice can import drawings in the DXF format used by CAD software. A heap buffer overflow existed when importing a DXF polyline. The point count taken from the file was truncated to a 16-bit value when the point buffer was sized, while the full count was used to fill it, so a polyline whose point count exceeded the 16-bit range was written past the end of the buffer. In fixed versions such oversized polylines are rejected. |
| In multiple functions of VideoRtpPayloadDecoderNode.cpp, there is a possible out of bounds write due to an integer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data()
Fix two bugs in pt5161l_read_block_data():
1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24],
but i2c_smbus_read_block_data() can return up to
I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into
the caller's buffer before the return value can be checked, so
the post-read length validation does not prevent a stack overrun
if a device returns more than 24 bytes. Resize the buffer to
I2C_SMBUS_BLOCK_MAX.
2. Unexpected positive return on length mismatch: When all three
retries are exhausted because the device returns data with an
unexpected length, i2c_smbus_read_block_data() returns a positive
byte count. The function returns this directly, and callers treat
any non-negative return as success, processing stale or incomplete
buffer contents. Return -EIO when retries are exhausted with a
positive return value, preserving the negative error code on I2C
failure. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: skip reading rdevs that are not in_sync
When reading bitmap pages from member disks, the code iterates through
all rdevs and attempts to read from the first available one. However,
it only checks for raid_disk assignment and Faulty flag, missing the
In_sync flag check.
This can cause bitmap data to be read from spare disks that are still
being rebuilt and don't have valid bitmap information yet. Reading
stale or uninitialized bitmap data from such disks can lead to
incorrect dirty bit tracking, potentially causing data corruption
during recovery or normal operation.
Add the In_sync flag check to ensure bitmap pages are only read from
fully synchronized member disks that have valid bitmap data. |
| In the Linux kernel, the following vulnerability has been resolved:
slub: fix data loss and overflow in krealloc()
Commit 2cd8231796b5 ("mm/slub: allow to set node and align in
k[v]realloc") introduced the ability to force a reallocation if the
original object does not satisfy new alignment or NUMA node, even when
the object is being shrunk.
This introduced two bugs in the reallocation fallback path:
1. Data loss during NUMA migration: The jump to 'alloc_new' happens
before 'ks' and 'orig_size' are initialized. As a result, the
memcpy() in the 'alloc_new' block would copy 0 bytes into the new
allocation.
2. Buffer overflow during shrinking: When shrinking an object while
forcing a new alignment, 'new_size' is smaller than the old size.
However, the memcpy() used the old size ('orig_size ?: ks'), leading
to an out-of-bounds write.
The same overflow bug exists in the kvrealloc() fallback path, where the
old bucket size ksize(p) is copied into the new buffer without being
bounded by the new size.
A simple reproducer:
// e.g. add to lkdtm as KREALLOC_SHRINK_OVERFLOW
while (1) {
void *p = kmalloc(128, GFP_KERNEL);
p = krealloc_node_align(p, 64, 256, GFP_KERNEL, NUMA_NO_NODE);
kfree(p);
}
demonstrates the issue:
==================================================================
BUG: KFENCE: out-of-bounds write in memcpy_orig+0x68/0x130
Out-of-bounds write at 0xffff8883ad757038 (120B right of kfence-#47):
memcpy_orig+0x68/0x130
krealloc_node_align_noprof+0x1c8/0x340
lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm]
lkdtm_do_action+0x3a/0x60 [lkdtm]
...
kfence-#47: 0xffff8883ad756fc0-0xffff8883ad756fff, size=64, cache=kmalloc-64
allocated by task 316 on cpu 7 at 97.680481s (0.021813s ago):
krealloc_node_align_noprof+0x19c/0x340
lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm]
lkdtm_do_action+0x3a/0x60 [lkdtm]
...
==================================================================
Fix it by moving the old size calculation to the top of __do_krealloc()
and bounding all copy lengths by the new allocation size. |
| LibreOffice can import documents in the OOXML format (DOCX). A heap buffer overflow existed when replaying deferred parser events for a text box element. A handler object was assumed to be of one type and written to at that type's field layout, but it could be a smaller object, so the write landed past the end of the allocation. In fixed versions the type is checked before the write. |
| LibreOffice can import presentations in the legacy binary PPT format. A stack buffer overflow existed when importing a colour-replacement record. Two fixed-size colour tables were filled from the file, but the write position was not reset between the two passes over the record, so a file whose combined colour counts exceeded the table size wrote past the end of the tables on the stack. In fixed versions the unused second pass is no longer read into those tables. |
| bz2.BZ2Decompressor objects could be reused after a decompression error. If an application caught the resulting OSError and retried with the same decompressor, crafted input could cause the decompressor to resume from an invalid internal state and perform out-of-bounds writes to a stack buffer. This could crash the process when processing untrusted data. |
| Issue summary: A signed integer overflow when sizing the destination
buffer for Unicode output in ASN1_mbstring_ncopy() can lead to a heap
buffer overflow.
Impact summary: A heap buffer overflow may lead to a crash or possibly
attacker controlled code execution or other undefined behaviour.
In ASN1_mbstring_copy() and ASN1_mbstring_ncopy() the destination
size for Unicode output is computed in a signed int: by left shift
of the input character count for BMPSTRING (UTF-16) and
UNIVERSALSTRING (UTF-32), and by summing per-character byte counts
for UTF8STRING. The calculation overflows when the input reaches
around 2^30 characters. In the worst case (UNIVERSALSTRING at 2^30
characters) the size wraps to zero, OPENSSL_malloc(1) is called, and
the subsequent character copy writes several gigabytes past the
one-byte allocation.
X.509 certificate processing routes through ASN1_STRING_set_by_NID(),
whose DIRSTRING_TYPE mask excludes UNIVERSALSTRING and whose per-NID
size limits cap the input length; no network protocol or
certificate-handling path in OpenSSL exercises the overflow.
Triggering the bug requires an application that calls
ASN1_mbstring_copy() or ASN1_mbstring_ncopy() directly, or registers
a custom string type via ASN1_STRING_TABLE_add(), with
attacker-controlled input on the order of half a gigabyte or more.
For these reasons this issue was assigned Low severity.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by
this issue, as the affected code is outside the OpenSSL FIPS module
boundary. |
| unbounded_spsc is an "unbounded" extension of bounded_spsc_queue. In versions 0.2.0 and prior, sender::send pointer-as-value transmute causes OOB read and fake-Arc drop under TX/RX race. At time of publication, there are no publicly available patches. |
| A stack overflow vulnerability exists in the WebCam Server Login functionality of GeoVision GV-VMS V20 20.0.2. A specially crafted HTTP request can lead to an arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger this vulnerability. |
| Heap-based buffer overflow in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Software installed and run as a non-privileged user may conduct intentional GPU sparse memory API calls to cause out of bounds write in the kernel.
The product incorrectly indexes internal state when performing sparse allocation remapping. |
| Heap buffer out-of-bounds write vulnerability due to integer overflow in Avira Antivirus engine when scanning a malformed MS-DOS executable file may allow Local Execution of Code or Denial-of-Service of the antivirus engine process.
This issue affects Avira Antivirus on Windows, macOS, and Linux for engine builds before 8.3.70.104. |
| Heap buffer out-of-bounds write vulnerability in Avira Antivirus engine when scanning a malformed POSIX tar archive may allow Local Execution of Code or Denial-of-Service of the antivirus engine process.
This issue affects Avira Antivirus on Windows, macOS, and Linux for engine builds before 8.3.27.12. |
