| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.217, Helper::sanitizeRemoteUrl() in app/Misc/Helper.php follows HTTP redirects via curlGetLastRedirectedUrl() but then re-validates the original URL instead of the final redirect destination. An attacker who can supply any URL that passes the initial host check can redirect FreeScout to internal HTTP services (cloud metadata, internal APIs, RFC1918 ranges) that would normally be blocked. This issue has been patched in version 1.8.217. |
| Server-Side Request Forgery (SSRF) vulnerability in pdfmake versions 0.3.0-beta.2 through 0.3.5 allows a remote attacker to obtain sensitive information via the src/URLResolver.js component. The fix was released in version 0.3.6 which introduces the setUrlAccessPolicy() method allowing server operators to define URL access rules. A warning is now logged when pdfmake is used server-side without a policy configured. |
| In the Linux kernel, the following vulnerability has been resolved:
counter: rz-mtu3-cnt: prevent counter from being toggled multiple times
Runtime PM counter is incremented / decremented each time the sysfs
enable file is written to.
If user writes 0 to the sysfs enable file multiple times, runtime PM
usage count underflows, generating the following message.
rz-mtu3-counter rz-mtu3-counter.0: Runtime PM usage count underflow!
At the same time, hardware registers end up being accessed with clocks
off in rz_mtu3_terminate_counter() to disable an already disabled
channel.
If user writes 1 to the sysfs enable file multiple times, runtime PM
usage count will be incremented each time, requiring the same number of
0 writes to get it back to 0.
If user writes 0 to the sysfs enable file while PWM is in progress, PWM
is stopped without counter being the owner of the underlying MTU3
channel.
Check against the cached count_is_enabled value and exit if the user
is trying to set the same enable value. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: runflags cannot determine whether to reclaim chanlist
syzbot reported a memory leak [1], because commit 4e1da516debb ("comedi:
Add reference counting for Comedi command handling") did not consider
the exceptional exit case in do_cmd_ioctl() where runflags is not set.
This caused chanlist not to be properly freed by do_become_nonbusy(),
as it only frees chanlist when runflags is correctly set.
Added a check in do_become_nonbusy() for the case where runflags is not
set, to properly free the chanlist memory.
[1]
BUG: memory leak
backtrace (crc 844a0efa):
__comedi_get_user_chanlist drivers/comedi/comedi_fops.c:1815 [inline]
do_cmd_ioctl.part.0+0x112/0x350 drivers/comedi/comedi_fops.c:1890
do_cmd_ioctl drivers/comedi/comedi_fops.c:1858 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns |
| A vulnerability in the web UI of Cisco Unity Connection Web Inbox could allow an unauthenticated, remote attacker to conduct SSRF attacks through an affected device.
This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to send arbitrary network requests that are sourced from the affected device. |
| Incus is an open source container and virtual machine manager. In versions prior to 7.0.0, the image import flow issues an outbound HEAD request to a user-supplied URL before validating the request against project restrictions such as restricted.images.servers. The imgPostURLInfo function constructs and sends a HEAD request directly from the attacker-supplied source URL to resolve image metadata, and this network interaction occurs before the flow reaches the point where the import would be rejected by policy. Although the actual image download is blocked by the project restriction, an authenticated user can coerce the daemon into making blind HEAD requests to arbitrary destinations.
These requests include server metadata in custom headers (Incus-Server-Architectures, Incus-Server-Version), which discloses information about the host environment to the attacker-controlled endpoint. This blind SSRF primitive can be used to probe internal services, unroutable address space, or cloud metadata endpoints reachable from the host.
This vulnerability pattern is similar to CVE-2026-24767. This issue has been fixed in version 7.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase. |
| Wallos is an open-source, self-hostable personal subscription tracker. Prior to version 4.8.1, the SSRF protection in endpoints/subscription/add.php (line 42) and endpoints/payments/add.php (line 40) uses an inline IP validation check (FILTER_FLAG_NO_PRIV_RANGE | FILTER_FLAG_NO_RES_RANGE) that does not block CGNAT addresses (100.64.0.0/10, RFC 6598). The includes/ssrf_helper.php file explicitly defines is_cgnat_ip() to cover this gap (used by notification endpoints), but the logo/icon URL fetching in subscription and payment endpoints performs its own inline validation that misses this range. This allows authenticated users to perform Blind SSRF to internal services in Tailscale, Carrier-Grade NAT, and other environments using 100.64.0.0/10 addresses. This issue has been patched in version 4.8.1. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: Fix resource leaks on errors in gpiochip_add_data_with_key()
Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"),
`gdev->dev.release` is unset. As a result, the reference count to
`gdev->dev` isn't dropped on the error handling paths.
Drop the reference on errors.
Also reorder the instructions to make the error handling simpler.
Now gpiochip_add_data_with_key() roughly looks like:
>>> Some memory allocation. Go to ERR ZONE 1 on errors.
>>> device_initialize().
gpiodev_release() takes over the responsibility for freeing the
resources of `gdev->dev`. The subsequent error handling paths
shouldn't go through ERR ZONE 1 again which leads to double free.
>>> Some initialization mainly on `gdev`.
>>> The rest of initialization. Go to ERR ZONE 2 on errors.
>>> Chip registration success and exit.
>>> ERR ZONE 2. gpio_device_put() and exit.
>>> ERR ZONE 1. |
| Wallos is an open-source, self-hostable personal subscription tracker. In versions 4.8.4 and prior, the incomplete SSRF fix in Wallos validates webhook URLs via gethostbyname() but passes the original hostname to cURL without CURLOPT_RESOLVE pinning on 10 of 11 outbound HTTP endpoints, leaving a DNS rebinding TOCTOU window. At time of publication, there are no publicly available patches. |
| Wallos is an open-source, self-hostable personal subscription tracker. In versions 4.8.4 and prior, the webhook notification feature reuses an administrator-configured local-target allowlist for every logged-in user. Any normal user can fully control a webhook URL, headers, and body, then use Wallos to send server-side requests to allowlisted internal automation services. When such a target exposes deployment or execution APIs, this can further enable adjacent-service RCE, but that downstream result is conditional on the target service. At time of publication, there are no publicly available patches. |
| Admidio is an open-source user management solution. Prior to version 5.0.9, the incomplete SSRF fix in Admidio's fetch_metadata.php validates the resolved IP address but passes the original hostname-based URL to curl_init(), leaving a DNS rebinding TOCTOU window that allows redirecting requests to internal IPs. This issue has been patched in version 5.0.9. |
| xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package allows attacker-controlled comment content to be serialized into XML without validating or neutralizing comment-breaking sequences. As a result, an attacker can terminate the comment early and inject arbitrary XML nodes into the serialized output. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13. |
| xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package serializes DocumentType node fields (internalSubset, publicId, systemId) verbatim without any escaping or validation. When these fields are set programmatically to attacker-controlled strings, XMLSerializer.serializeToString can produce output where the DOCTYPE declaration is terminated early and arbitrary markup appears outside it. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13. |
| OpenClaw before 2026.4.22 contains a server-side request forgery vulnerability in the Zalo plugin's sendPhoto function that fails to validate outbound photo URLs through the SSRF guard. Attackers can bypass SSRF protection by providing malicious photo URLs to the Zalo Bot API, enabling unauthorized access to internal resources. |
| xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package allows attacker-controlled processing instruction data to be serialized into XML without validating or neutralizing the PI-closing sequence ?>. As a result, an attacker can terminate the processing instruction early and inject arbitrary XML nodes into the serialized output. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13. |
| OpenClaw before 2026.4.20 contains a server-side request forgery vulnerability in QQBot direct media upload that skips URL validation. Attackers can bypass SSRF protections by sending crafted image URLs to uploadC2CMedia and uploadGroupMedia endpoints to relay unintended requests. |
| OpenClaw before 2026.4.5 contains a server-side request forgery vulnerability in the CDP /json/version WebSocket endpoint that allows attackers to pivot to untrusted second-hop targets. The webSocketDebuggerUrl response field is not properly validated, enabling attackers to redirect connections to arbitrary hosts and perform SSRF-style attacks. |
| Plack::Middleware::XSendfile versions through 1.0053 for Perl can allow client-controlled path rewriting.
Plack::Middleware::XSendfile allows the variation setting (sendfile type) to be set by the client via the X-Sendfile-Type header, if it is not considered in the middleware constructor or the Plack environment.
A malicious client can set the X-Sendfile-Type header to "X-Accel-Redirect" to services running behind nginx reverse proxies, and then set the X-Accel-Mapping to map the path to an arbitrary file on the server.
Since 1.0053, Plack::Middleware::XSendfile is deprecated and will be removed from future releases of Plack.
This is similar to CVE-2025-61780 for Rack::Sendfile, although Plack::Middleware::XSendfile has some mitigations that disallow regular expressions to be used in the mapping, and only apply the mapping for the "X-Accel-Redirect" type. |
