| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor
Syzbot has identified a bug in usbcore (see the Closes: tag below)
caused by our assumption that the reserved bits in an endpoint
descriptor's bEndpointAddress field will always be 0. As a result of
the bug, the endpoint_is_duplicate() routine in config.c (and possibly
other routines as well) may believe that two descriptors are for
distinct endpoints, even though they have the same direction and
endpoint number. This can lead to confusion, including the bug
identified by syzbot (two descriptors with matching endpoint numbers
and directions, where one was interrupt and the other was bulk).
To fix the bug, we will clear the reserved bits in bEndpointAddress
when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1
specs say these bits are "Reserved, reset to zero".) This requires us
to make a copy of the descriptor earlier in usb_parse_endpoint() and
use the copy instead of the original when checking for duplicates. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix kernel bug on rename operation of broken directory
Syzbot reported that in rename directory operation on broken directory on
nilfs2, __block_write_begin_int() called to prepare block write may fail
BUG_ON check for access exceeding the folio/page size.
This is because nilfs_dotdot(), which gets parent directory reference
entry ("..") of the directory to be moved or renamed, does not check
consistency enough, and may return location exceeding folio/page size for
broken directories.
Fix this issue by checking required directory entries ("." and "..") in
the first chunk of the directory in nilfs_dotdot(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: discard write access to the directory open
may_open() does not allow a directory to be opened with the write access.
However, some writing flags set by client result in adding write access
on server, making ksmbd incompatible with FUSE file system. Simply, let's
discard the write access when opening a directory.
list_add corruption. next is NULL.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:26!
pc : __list_add_valid+0x88/0xbc
lr : __list_add_valid+0x88/0xbc
Call trace:
__list_add_valid+0x88/0xbc
fuse_finish_open+0x11c/0x170
fuse_open_common+0x284/0x5e8
fuse_dir_open+0x14/0x24
do_dentry_open+0x2a4/0x4e0
dentry_open+0x50/0x80
smb2_open+0xbe4/0x15a4
handle_ksmbd_work+0x478/0x5ec
process_one_work+0x1b4/0x448
worker_thread+0x25c/0x430
kthread+0x104/0x1d4
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: avoid too many retransmit packets
If a TCP socket is using TCP_USER_TIMEOUT, and the other peer
retracted its window to zero, tcp_retransmit_timer() can
retransmit a packet every two jiffies (2 ms for HZ=1000),
for about 4 minutes after TCP_USER_TIMEOUT has 'expired'.
The fix is to make sure tcp_rtx_probe0_timed_out() takes
icsk->icsk_user_timeout into account.
Before blamed commit, the socket would not timeout after
icsk->icsk_user_timeout, but would use standard exponential
backoff for the retransmits.
Also worth noting that before commit e89688e3e978 ("net: tcp:
fix unexcepted socket die when snd_wnd is 0"), the issue
would last 2 minutes instead of 4. |
| In the Linux kernel, the following vulnerability has been resolved:
mips: bmips: BCM6358: make sure CBR is correctly set
It was discovered that some device have CBR address set to 0 causing
kernel panic when arch_sync_dma_for_cpu_all is called.
This was notice in situation where the system is booted from TP1 and
BMIPS_GET_CBR() returns 0 instead of a valid address and
!!(read_c0_brcm_cmt_local() & (1 << 31)); not failing.
The current check whether RAC flush should be disabled or not are not
enough hence lets check if CBR is a valid address or not. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_table_check: fix crash on ZONE_DEVICE
Not all pages may apply to pgtable check. One example is ZONE_DEVICE
pages: they map PFNs directly, and they don't allocate page_ext at all
even if there's struct page around. One may reference
devm_memremap_pages().
When both ZONE_DEVICE and page-table-check enabled, then try to map some
dax memories, one can trigger kernel bug constantly now when the kernel
was trying to inject some pfn maps on the dax device:
kernel BUG at mm/page_table_check.c:55!
While it's pretty legal to use set_pxx_at() for ZONE_DEVICE pages for page
fault resolutions, skip all the checks if page_ext doesn't even exist in
pgtable checker, which applies to ZONE_DEVICE but maybe more. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix tainted pointer delete is case of flow rules creation fail
In case of flow rule creation fail in mlx5_lag_create_port_sel_table(),
instead of previously created rules, the tainted pointer is deleted
deveral times.
Fix this bug by using correct flow rules pointers.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: iosm: Fix tainted pointer delete is case of region creation fail
In case of region creation fail in ipc_devlink_create_region(), previously
created regions delete process starts from tainted pointer which actually
holds error code value.
Fix this bug by decreasing region index before delete.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix d_parent walk
The WARN_ON_ONCE() in collect_domain_accesses() can be triggered when
trying to link a root mount point. This cannot work in practice because
this directory is mounted, but the VFS check is done after the call to
security_path_link().
Do not use source directory's d_parent when the source directory is the
mount point.
[mic: Fix commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: flush all requests after setting CACHEFILES_DEAD
In ondemand mode, when the daemon is processing an open request, if the
kernel flags the cache as CACHEFILES_DEAD, the cachefiles_daemon_write()
will always return -EIO, so the daemon can't pass the copen to the kernel.
Then the kernel process that is waiting for the copen triggers a hung_task.
Since the DEAD state is irreversible, it can only be exited by closing
/dev/cachefiles. Therefore, after calling cachefiles_io_error() to mark
the cache as CACHEFILES_DEAD, if in ondemand mode, flush all requests to
avoid the above hungtask. We may still be able to read some of the cached
data before closing the fd of /dev/cachefiles.
Note that this relies on the patch that adds reference counting to the req,
otherwise it may UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dpt: Make DPT object unshrinkable
In some scenarios, the DPT object gets shrunk but
the actual framebuffer did not and thus its still
there on the DPT's vm->bound_list. Then it tries to
rewrite the PTEs via a stale CPU mapping. This causes panic.
[vsyrjala: Add TODO comment]
(cherry picked from commit 51064d471c53dcc8eddd2333c3f1c1d9131ba36c) |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
Pass the already obtained vlan group pointer to br_mst_vlan_set_state()
instead of dereferencing it again. Each caller has already correctly
dereferenced it for their context. This change is required for the
following suspicious RCU dereference fix. No functional changes
intended. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix potential kernel bug due to lack of writeback flag waiting
Destructive writes to a block device on which nilfs2 is mounted can cause
a kernel bug in the folio/page writeback start routine or writeback end
routine (__folio_start_writeback in the log below):
kernel BUG at mm/page-writeback.c:3070!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
...
RIP: 0010:__folio_start_writeback+0xbaa/0x10e0
Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff
e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 <0f>
0b e8 1f ca c6 ff 4c 89 f7 48 c7 c6 a0 c6 12 84 e8 d0 b3 0f 00
...
Call Trace:
<TASK>
nilfs_segctor_do_construct+0x4654/0x69d0 [nilfs2]
nilfs_segctor_construct+0x181/0x6b0 [nilfs2]
nilfs_segctor_thread+0x548/0x11c0 [nilfs2]
kthread+0x2f0/0x390
ret_from_fork+0x4b/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
This is because when the log writer starts a writeback for segment summary
blocks or a super root block that use the backing device's page cache, it
does not wait for the ongoing folio/page writeback, resulting in an
inconsistent writeback state.
Fix this issue by waiting for ongoing writebacks when putting
folios/pages on the backing device into writeback state. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix the warning "__rxe_cleanup+0x12c/0x170 [rdma_rxe]"
The Call Trace is as below:
"
<TASK>
? show_regs.cold+0x1a/0x1f
? __rxe_cleanup+0x12c/0x170 [rdma_rxe]
? __warn+0x84/0xd0
? __rxe_cleanup+0x12c/0x170 [rdma_rxe]
? report_bug+0x105/0x180
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? __rxe_cleanup+0x12c/0x170 [rdma_rxe]
? __rxe_cleanup+0x124/0x170 [rdma_rxe]
rxe_destroy_qp.cold+0x24/0x29 [rdma_rxe]
ib_destroy_qp_user+0x118/0x190 [ib_core]
rdma_destroy_qp.cold+0x43/0x5e [rdma_cm]
rtrs_cq_qp_destroy.cold+0x1d/0x2b [rtrs_core]
rtrs_srv_close_work.cold+0x1b/0x31 [rtrs_server]
process_one_work+0x21d/0x3f0
worker_thread+0x4a/0x3c0
? process_one_work+0x3f0/0x3f0
kthread+0xf0/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
"
When too many rdma resources are allocated, rxe needs more time to
handle these rdma resources. Sometimes with the current timeout, rxe
can not release the rdma resources correctly.
Compared with other rdma drivers, a bigger timeout is used. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp_bpf: Fix the sk_mem_uncharge logic in tcp_bpf_sendmsg
The current sk memory accounting logic in __SK_REDIRECT is pre-uncharging
tosend bytes, which is either msg->sg.size or a smaller value apply_bytes.
Potential problems with this strategy are as follows:
- If the actual sent bytes are smaller than tosend, we need to charge some
bytes back, as in line 487, which is okay but seems not clean.
- When tosend is set to apply_bytes, as in line 417, and (ret < 0), we may
miss uncharging (msg->sg.size - apply_bytes) bytes.
[...]
415 tosend = msg->sg.size;
416 if (psock->apply_bytes && psock->apply_bytes < tosend)
417 tosend = psock->apply_bytes;
[...]
443 sk_msg_return(sk, msg, tosend);
444 release_sock(sk);
446 origsize = msg->sg.size;
447 ret = tcp_bpf_sendmsg_redir(sk_redir, redir_ingress,
448 msg, tosend, flags);
449 sent = origsize - msg->sg.size;
[...]
454 lock_sock(sk);
455 if (unlikely(ret < 0)) {
456 int free = sk_msg_free_nocharge(sk, msg);
458 if (!cork)
459 *copied -= free;
460 }
[...]
487 if (eval == __SK_REDIRECT)
488 sk_mem_charge(sk, tosend - sent);
[...]
When running the selftest test_txmsg_redir_wait_sndmem with txmsg_apply,
the following warning will be reported:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 57 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x190/0x1a0
Modules linked in:
CPU: 6 UID: 0 PID: 57 Comm: kworker/6:0 Not tainted 6.12.0-rc1.bm.1-amd64+ #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events sk_psock_destroy
RIP: 0010:inet_sock_destruct+0x190/0x1a0
RSP: 0018:ffffad0a8021fe08 EFLAGS: 00010206
RAX: 0000000000000011 RBX: ffff9aab4475b900 RCX: ffff9aab481a0800
RDX: 0000000000000303 RSI: 0000000000000011 RDI: ffff9aab4475b900
RBP: ffff9aab4475b990 R08: 0000000000000000 R09: ffff9aab40050ec0
R10: 0000000000000000 R11: ffff9aae6fdb1d01 R12: ffff9aab49c60400
R13: ffff9aab49c60598 R14: ffff9aab49c60598 R15: dead000000000100
FS: 0000000000000000(0000) GS:ffff9aae6fd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffec7e47bd8 CR3: 00000001a1a1c004 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x89/0x130
? inet_sock_destruct+0x190/0x1a0
? report_bug+0xfc/0x1e0
? handle_bug+0x5c/0xa0
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? inet_sock_destruct+0x190/0x1a0
__sk_destruct+0x25/0x220
sk_psock_destroy+0x2b2/0x310
process_scheduled_works+0xa3/0x3e0
worker_thread+0x117/0x240
? __pfx_worker_thread+0x10/0x10
kthread+0xcf/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
In __SK_REDIRECT, a more concise way is delaying the uncharging after sent
bytes are finalized, and uncharge this value. When (ret < 0), we shall
invoke sk_msg_free.
Same thing happens in case __SK_DROP, when tosend is set to apply_bytes,
we may miss uncharging (msg->sg.size - apply_bytes) bytes. The same
warning will be reported in selftest.
[...]
468 case __SK_DROP:
469 default:
470 sk_msg_free_partial(sk, msg, tosend);
471 sk_msg_apply_bytes(psock, tosend);
472 *copied -= (tosend + delta);
473 return -EACCES;
[...]
So instead of sk_msg_free_partial we can do sk_msg_free here. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: fix OOB map writes when deleting elements
Jordy says:
"
In the xsk_map_delete_elem function an unsigned integer
(map->max_entries) is compared with a user-controlled signed integer
(k). Due to implicit type conversion, a large unsigned value for
map->max_entries can bypass the intended bounds check:
if (k >= map->max_entries)
return -EINVAL;
This allows k to hold a negative value (between -2147483648 and -2),
which is then used as an array index in m->xsk_map[k], which results
in an out-of-bounds access.
spin_lock_bh(&m->lock);
map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry
old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write
if (old_xs)
xsk_map_sock_delete(old_xs, map_entry);
spin_unlock_bh(&m->lock);
The xchg operation can then be used to cause an out-of-bounds write.
Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead
to further memory corruption.
"
It indeed results in following splat:
[76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108
[76612.904330] #PF: supervisor write access in kernel mode
[76612.909639] #PF: error_code(0x0002) - not-present page
[76612.914855] PGD 0 P4D 0
[76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP
[76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ #470
[76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60
[76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31
[76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246
[76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000
[76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000
[76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007
[76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8
[76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0
[76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000
[76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0
[76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[76613.041086] PKRU: 55555554
[76613.043842] Call Trace:
[76613.046331] <TASK>
[76613.048468] ? __die+0x20/0x60
[76613.051581] ? page_fault_oops+0x15a/0x450
[76613.055747] ? search_extable+0x22/0x30
[76613.059649] ? search_bpf_extables+0x5f/0x80
[76613.063988] ? exc_page_fault+0xa9/0x140
[76613.067975] ? asm_exc_page_fault+0x22/0x30
[76613.072229] ? xsk_map_delete_elem+0x2d/0x60
[76613.076573] ? xsk_map_delete_elem+0x23/0x60
[76613.080914] __sys_bpf+0x19b7/0x23c0
[76613.084555] __x64_sys_bpf+0x1a/0x20
[76613.088194] do_syscall_64+0x37/0xb0
[76613.091832] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[76613.096962] RIP: 0033:0x7f80b6d1e88d
[76613.100592] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48
[76613.119631] RSP: 002b:00007ffd1ae0ac68 EFLAGS: 00000206 ORIG_RAX: 0000000000000141
[76613.131330] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f80b6d1e88d
[76613.142632] RDX: 0000000000000098 RSI: 00007ffd1ae0ad20 RDI: 0000000000000003
[76613.153967] RBP: 00007ffd1ae0adc0 R08: 0000000000000000 R09: 0000000000000000
[76613.166030] R10: 00007f80b6f77040 R11: 0000000000000206 R12: 00007ffd1ae0aed8
[76613.177130] R13: 000055ddf42ce1e9 R14: 000055ddf42d0d98 R15: 00
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Add cond_resched() for no forced preemption model
For no forced preemption model kernel, in the scenario where the
expander is connected to 12 high performance SAS SSDs, the following
call trace may occur:
[ 214.409199][ C240] watchdog: BUG: soft lockup - CPU#240 stuck for 22s! [irq/149-hisi_sa:3211]
[ 214.568533][ C240] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 214.575224][ C240] pc : fput_many+0x8c/0xdc
[ 214.579480][ C240] lr : fput+0x1c/0xf0
[ 214.583302][ C240] sp : ffff80002de2b900
[ 214.587298][ C240] x29: ffff80002de2b900 x28: ffff1082aa412000
[ 214.593291][ C240] x27: ffff3062a0348c08 x26: ffff80003a9f6000
[ 214.599284][ C240] x25: ffff1062bbac5c40 x24: 0000000000001000
[ 214.605277][ C240] x23: 000000000000000a x22: 0000000000000001
[ 214.611270][ C240] x21: 0000000000001000 x20: 0000000000000000
[ 214.617262][ C240] x19: ffff3062a41ae580 x18: 0000000000010000
[ 214.623255][ C240] x17: 0000000000000001 x16: ffffdb3a6efe5fc0
[ 214.629248][ C240] x15: ffffffffffffffff x14: 0000000003ffffff
[ 214.635241][ C240] x13: 000000000000ffff x12: 000000000000029c
[ 214.641234][ C240] x11: 0000000000000006 x10: ffff80003a9f7fd0
[ 214.647226][ C240] x9 : ffffdb3a6f0482fc x8 : 0000000000000001
[ 214.653219][ C240] x7 : 0000000000000002 x6 : 0000000000000080
[ 214.659212][ C240] x5 : ffff55480ee9b000 x4 : fffffde7f94c6554
[ 214.665205][ C240] x3 : 0000000000000002 x2 : 0000000000000020
[ 214.671198][ C240] x1 : 0000000000000021 x0 : ffff3062a41ae5b8
[ 214.677191][ C240] Call trace:
[ 214.680320][ C240] fput_many+0x8c/0xdc
[ 214.684230][ C240] fput+0x1c/0xf0
[ 214.687707][ C240] aio_complete_rw+0xd8/0x1fc
[ 214.692225][ C240] blkdev_bio_end_io+0x98/0x140
[ 214.696917][ C240] bio_endio+0x160/0x1bc
[ 214.701001][ C240] blk_update_request+0x1c8/0x3bc
[ 214.705867][ C240] scsi_end_request+0x3c/0x1f0
[ 214.710471][ C240] scsi_io_completion+0x7c/0x1a0
[ 214.715249][ C240] scsi_finish_command+0x104/0x140
[ 214.720200][ C240] scsi_softirq_done+0x90/0x180
[ 214.724892][ C240] blk_mq_complete_request+0x5c/0x70
[ 214.730016][ C240] scsi_mq_done+0x48/0xac
[ 214.734194][ C240] sas_scsi_task_done+0xbc/0x16c [libsas]
[ 214.739758][ C240] slot_complete_v3_hw+0x260/0x760 [hisi_sas_v3_hw]
[ 214.746185][ C240] cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw]
[ 214.752179][ C240] irq_thread_fn+0x34/0xa4
[ 214.756435][ C240] irq_thread+0xc4/0x130
[ 214.760520][ C240] kthread+0x108/0x13c
[ 214.764430][ C240] ret_from_fork+0x10/0x18
This is because in the hisi_sas driver, both the hardware interrupt
handler and the interrupt thread are executed on the same CPU. In the
performance test scenario, function irq_wait_for_interrupt() will always
return 0 if lots of interrupts occurs and the CPU will be continuously
consumed. As a result, the CPU cannot run the watchdog thread. When the
watchdog time exceeds the specified time, call trace occurs.
To fix it, add cond_resched() to execute the watchdog thread. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_find()
The per-netns IP tunnel hash table is protected by the RTNL mutex and
ip_tunnel_find() is only called from the control path where the mutex is
taken.
Add a lockdep expression to hlist_for_each_entry_rcu() in
ip_tunnel_find() in order to validate that the mutex is held and to
silence the suspicious RCU usage warning [1].
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted
-----------------------------
net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/362:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 12 UID: 0 PID: 362 Comm: ip Not tainted 6.12.0-rc3-custom-gd95d9a31aceb #139
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0xba/0x110
lockdep_rcu_suspicious.cold+0x4f/0xd6
ip_tunnel_find+0x435/0x4d0
ip_tunnel_newlink+0x517/0x7a0
ipgre_newlink+0x14c/0x170
__rtnl_newlink+0x1173/0x19c0
rtnl_newlink+0x6c/0xa0
rtnetlink_rcv_msg+0x3cc/0xf60
netlink_rcv_skb+0x171/0x450
netlink_unicast+0x539/0x7f0
netlink_sendmsg+0x8c1/0xd80
____sys_sendmsg+0x8f9/0xc20
___sys_sendmsg+0x197/0x1e0
__sys_sendmsg+0x122/0x1f0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/sve: Discard stale CPU state when handling SVE traps
The logic for handling SVE traps manipulates saved FPSIMD/SVE state
incorrectly, and a race with preemption can result in a task having
TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SVE traps enabled). This has been observed to result
in warnings from do_sve_acc() where SVE traps are not expected while
TIF_SVE is set:
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
Warnings of this form have been reported intermittently, e.g.
https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/
https://lore.kernel.org/linux-arm-kernel/000000000000511e9a060ce5a45c@google.com/
The race can occur when the SVE trap handler is preempted before and
after manipulating the saved FPSIMD/SVE state, starting and ending on
the same CPU, e.g.
| void do_sve_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
|
| sve_init_regs() {
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| ...
| } else {
| fpsimd_to_sve(current);
| current->thread.fp_type = FP_STATE_SVE;
| }
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SVE traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix overloading of MEM_UNINIT's meaning
Lonial reported an issue in the BPF verifier where check_mem_size_reg()
has the following code:
if (!tnum_is_const(reg->var_off))
/* For unprivileged variable accesses, disable raw
* mode so that the program is required to
* initialize all the memory that the helper could
* just partially fill up.
*/
meta = NULL;
This means that writes are not checked when the register containing the
size of the passed buffer has not a fixed size. Through this bug, a BPF
program can write to a map which is marked as read-only, for example,
.rodata global maps.
The problem is that MEM_UNINIT's initial meaning that "the passed buffer
to the BPF helper does not need to be initialized" which was added back
in commit 435faee1aae9 ("bpf, verifier: add ARG_PTR_TO_RAW_STACK type")
got overloaded over time with "the passed buffer is being written to".
The problem however is that checks such as the above which were added later
via 06c1c049721a ("bpf: allow helpers access to variable memory") set meta
to NULL in order force the user to always initialize the passed buffer to
the helper. Due to the current double meaning of MEM_UNINIT, this bypasses
verifier write checks to the memory (not boundary checks though) and only
assumes the latter memory is read instead.
Fix this by reverting MEM_UNINIT back to its original meaning, and having
MEM_WRITE as an annotation to BPF helpers in order to then trigger the
BPF verifier checks for writing to memory.
Some notes: check_arg_pair_ok() ensures that for ARG_CONST_SIZE{,_OR_ZERO}
we can access fn->arg_type[arg - 1] since it must contain a preceding
ARG_PTR_TO_MEM. For check_mem_reg() the meta argument can be removed
altogether since we do check both BPF_READ and BPF_WRITE. Same for the
equivalent check_kfunc_mem_size_reg(). |
