| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone device registration error path
If thermal_zone_device_register_with_trips() fails after registering
a thermal zone device, it needs to wait for the tz->removal completion
like thermal_zone_device_unregister(), in case user space has managed
to take a reference to the thermal zone device's kobject, in which case
thermal_release() may not be called by the error path itself and tz may
be freed prematurely.
Add the missing wait_for_completion() call to the thermal zone device
registration error path. |
| A use after free issue was addressed with improved memory management. This issue is fixed in iOS 18.3 and iPadOS 18.3, iPadOS 17.7.6, macOS Sequoia 15.3, macOS Sonoma 14.7.5, macOS Ventura 13.7.5, tvOS 18.3, visionOS 2.3, watchOS 11.3. A malicious application may be able to elevate privileges. Apple is aware of a report that this issue may have been actively exploited against versions of iOS before iOS 17.2. |
| In the Linux kernel, the following vulnerability has been resolved:
gpib: fix use-after-free in IO ioctl handlers
The IBRD, IBWRT, IBCMD, and IBWAIT ioctl handlers use a gpib_descriptor
pointer after board->big_gpib_mutex has been released. A concurrent
IBCLOSEDEV ioctl can free the descriptor via close_dev_ioctl() during
this window, causing a use-after-free.
The IO handlers (read_ioctl, write_ioctl, command_ioctl) explicitly
release big_gpib_mutex before calling their handler. wait_ioctl() is
called with big_gpib_mutex held, but ibwait() releases it internally
when wait_mask is non-zero. In all four cases, the descriptor pointer
obtained from handle_to_descriptor() becomes unprotected.
Fix this by introducing a kernel-only descriptor_busy reference count
in struct gpib_descriptor. Each handler atomically increments
descriptor_busy under file_priv->descriptors_mutex before releasing the
lock, and decrements it when done. close_dev_ioctl() checks
descriptor_busy under the same lock and rejects the close with -EBUSY
if the count is non-zero.
A reference count rather than a simple flag is necessary because
multiple handlers can operate on the same descriptor concurrently
(e.g. IBRD and IBWAIT on the same handle from different threads).
A separate counter is needed because io_in_progress can be cleared from
unprivileged userspace via the IBWAIT ioctl (through general_ibstatus()
with set_mask containing CMPL), which would allow an attacker to bypass
a check based solely on io_in_progress. The new descriptor_busy
counter is only modified by the kernel IO paths.
The lock ordering is consistent (big_gpib_mutex -> descriptors_mutex)
and the handlers only hold descriptors_mutex briefly during the lookup,
so there is no deadlock risk and no impact on IO throughput. |
| Memory safety bugs present in Thunderbird ESR 140.10.1 and Thunderbird 150.0.1. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150.0.2, Firefox ESR 140.10.2, Firefox ESR 115.35.2, Thunderbird 150.0.2, and Thunderbird 140.10.2. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Fix use-after-free in nfs4_init_client()
KASAN reports a use-after-free when attempting to mount two different
exports through two different NICs that belong to the same server.
Olga was able to hit this with kernels starting somewhere between 5.7
and 5.10, but I traced the patch that introduced the clear_bit() call to
4.13. So something must have changed in the refcounting of the clp
pointer to make this call to nfs_put_client() the very last one. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Set send and receive CQ before forwarding to the driver
Preset both receive and send CQ pointers prior to call to the drivers and
overwrite it later again till the mlx4 is going to be changed do not
overwrite ibqp properties.
This change is needed for mlx5, because in case of QP creation failure, it
will go to the path of QP destroy which relies on proper CQ pointers.
BUG: KASAN: use-after-free in create_qp.cold+0x164/0x16e [mlx5_ib]
Write of size 8 at addr ffff8880064c55c0 by task a.out/246
CPU: 0 PID: 246 Comm: a.out Not tainted 5.15.0+ #291
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x83/0xdf
create_qp.cold+0x164/0x16e [mlx5_ib]
mlx5_ib_create_qp+0x358/0x28a0 [mlx5_ib]
create_qp.part.0+0x45b/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 246:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0xa4/0xd0
create_qp.part.0+0x92/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 246:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x10c/0x150
slab_free_freelist_hook+0xb4/0x1b0
kfree+0xe7/0x2a0
create_qp.part.0+0x52b/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent possible UaF in addrconf_permanent_addr()
The mentioned helper try to warn the user about an exceptional
condition, but the message is delivered too late, accessing the ipv6
after its possible deletion.
Reorder the statement to avoid the possible UaF; while at it, place the
warning outside the idev->lock as it needs no protection. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix use-after-free race in VM acquire
Replace non-atomic vm->process_info assignment with cmpxchg()
to prevent race when parent/child processes sharing a drm_file
both try to acquire the same VM after fork().
(cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Add NULL checks when resetting request and reply queues
The driver encountered a crash during resource cleanup when the reply and
request queues were NULL due to freed memory. This issue occurred when the
creation of reply or request queues failed, and the driver freed the memory
first, but attempted to mem set the content of the freed memory, leading to
a system crash.
Add NULL pointer checks for reply and request queues before accessing the
reply/request memory during cleanup |
| In the Linux kernel, the following vulnerability has been resolved:
serial: caif: hold tty->link reference in ldisc_open and ser_release
A reproducer triggers a KASAN slab-use-after-free in pty_write_room()
when caif_serial's TX path calls tty_write_room(). The faulting access
is on tty->link->port.
Hold an extra kref on tty->link for the lifetime of the caif_serial line
discipline: get it in ldisc_open() and drop it in ser_release(), and
also drop it on the ldisc_open() error path.
With this change applied, the reproducer no longer triggers the UAF in
my testing. |
| Use-after-free in the DOM: Networking component. This vulnerability was fixed in Firefox 150.0.2, Firefox ESR 140.10.2, Firefox ESR 115.35.2, Thunderbird 150.0.2, and Thunderbird 140.10.2. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: fix use-after-free in roccat_report_event
roccat_report_event() iterates over the device->readers list without
holding the readers_lock. This allows a concurrent roccat_release() to
remove and free a reader while it's still being accessed, leading to a
use-after-free.
Protect the readers list traversal with the readers_lock mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Wait for RCU readers during policy netns exit
xfrm_policy_fini() frees the policy_bydst hash tables after flushing the
policy work items and deleting all policies, but it does not wait for
concurrent RCU readers to leave their read-side critical sections first.
The policy_bydst tables are published via rcu_assign_pointer() and are
looked up through rcu_dereference_check(), so netns teardown must also
wait for an RCU grace period before freeing the table memory.
Fix this by adding synchronize_rcu() before freeing the policy hash tables. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled
When the Remote System Update (RSU) isn't enabled in the First Stage
Boot Loader (FSBL), the driver encounters a NULL pointer dereference when
excute svc_normal_to_secure_thread() thread, resulting in a kernel panic:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Mem abort info:
...
Data abort info:
...
[0000000000000008] user address but active_mm is swapper
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 79 Comm: svc_smc_hvc_thr Not tainted 6.19.0-rc8-yocto-standard+ #59 PREEMPT
Hardware name: SoCFPGA Stratix 10 SoCDK (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : svc_normal_to_secure_thread+0x38c/0x990
lr : svc_normal_to_secure_thread+0x144/0x990
...
Call trace:
svc_normal_to_secure_thread+0x38c/0x990 (P)
kthread+0x150/0x210
ret_from_fork+0x10/0x20
Code: 97cfc113 f9400260 aa1403e1 f9400400 (f9400402)
---[ end trace 0000000000000000 ]---
The issue occurs because rsu_send_async_msg() fails when RSU is not enabled
in firmware, causing the channel to be freed via stratix10_svc_free_channel().
However, the probe function continues execution and registers
svc_normal_to_secure_thread(), which subsequently attempts to access the
already-freed channel, triggering the NULL pointer dereference.
Fix this by properly cleaning up the async client and returning early on
failure, preventing the thread from being used with an invalid channel. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_helper: pass helper to expect cleanup
nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()
to remove expectations belonging to the helper being unregistered.
However, it passes NULL instead of the helper pointer as the data
argument, so expect_iter_me() never matches any expectation and all
of them survive the cleanup.
After unregister returns, nfnl_cthelper_del() frees the helper
object immediately. Subsequent expectation dumps or packet-driven
init_conntrack() calls then dereference the freed exp->helper,
causing a use-after-free.
Pass the actual helper pointer so expectations referencing it are
properly destroyed before the helper object is freed.
BUG: KASAN: slab-use-after-free in string+0x38f/0x430
Read of size 1 at addr ffff888003b14d20 by task poc/103
Call Trace:
string+0x38f/0x430
vsnprintf+0x3cc/0x1170
seq_printf+0x17a/0x240
exp_seq_show+0x2e5/0x560
seq_read_iter+0x419/0x1280
proc_reg_read+0x1ac/0x270
vfs_read+0x179/0x930
ksys_read+0xef/0x1c0
Freed by task 103:
The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888003b14d00, ffff888003b14dc0) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbtmc: Flush anchored URBs in usbtmc_release
When calling usbtmc_release, pending anchored URBs must be flushed or
killed to prevent use-after-free errors (e.g. in the HCD giveback
path). Call usbtmc_draw_down() to allow anchored URBs to be completed. |
| A maliciously crafted PRT file, when parsed through certain Autodesk products, can force a Use-After-Free vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix potential UAF in set_cig_params_sync
hci_conn lookup and field access must be covered by hdev lock in
set_cig_params_sync, otherwise it's possible it is freed concurrently.
Take hdev lock to prevent hci_conn from being deleted or modified
concurrently. Just RCU lock is not suitable here, as we also want to
avoid "tearing" in the configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: fix potential UAF in hci_le_remote_conn_param_req_evt
hci_conn lookup and field access must be covered by hdev lock in
hci_le_remote_conn_param_req_evt, otherwise it's possible it is freed
concurrently.
Extend the hci_dev_lock critical section to cover all conn usage. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready().
syzbot reported use-after-free of AF_UNIX socket's sk->sk_socket
in sk_psock_verdict_data_ready(). [0]
In unix_stream_sendmsg(), the peer socket's ->sk_data_ready() is
called after dropping its unix_state_lock().
Although the sender socket holds the peer's refcount, it does not
prevent the peer's sock_orphan(), and the peer's sk_socket might
be freed after one RCU grace period.
Let's fetch the peer's sk->sk_socket and sk->sk_socket->ops under
RCU in sk_psock_verdict_data_ready().
[0]:
BUG: KASAN: slab-use-after-free in sk_psock_verdict_data_ready+0xec/0x590 net/core/skmsg.c:1278
Read of size 8 at addr ffff8880594da860 by task syz.4.1842/11013
CPU: 1 UID: 0 PID: 11013 Comm: syz.4.1842 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
sk_psock_verdict_data_ready+0xec/0x590 net/core/skmsg.c:1278
unix_stream_sendmsg+0x8a3/0xe80 net/unix/af_unix.c:2482
sock_sendmsg_nosec net/socket.c:721 [inline]
__sock_sendmsg net/socket.c:736 [inline]
____sys_sendmsg+0x972/0x9f0 net/socket.c:2585
___sys_sendmsg+0x2a5/0x360 net/socket.c:2639
__sys_sendmsg net/socket.c:2671 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2674
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7facf899c819
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007facf9827028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007facf8c15fa0 RCX: 00007facf899c819
RDX: 0000000000000000 RSI: 0000200000000500 RDI: 0000000000000004
RBP: 00007facf8a32c91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007facf8c16038 R14: 00007facf8c15fa0 R15: 00007ffd41b01c78
</TASK>
Allocated by task 11013:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
unpoison_slab_object mm/kasan/common.c:340 [inline]
__kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366
kasan_slab_alloc include/linux/kasan.h:253 [inline]
slab_post_alloc_hook mm/slub.c:4538 [inline]
slab_alloc_node mm/slub.c:4866 [inline]
kmem_cache_alloc_lru_noprof+0x2b8/0x640 mm/slub.c:4885
sock_alloc_inode+0x28/0xc0 net/socket.c:316
alloc_inode+0x6a/0x1b0 fs/inode.c:347
new_inode_pseudo include/linux/fs.h:3003 [inline]
sock_alloc net/socket.c:631 [inline]
__sock_create+0x12d/0x9d0 net/socket.c:1562
sock_create net/socket.c:1656 [inline]
__sys_socketpair+0x1c4/0x560 net/socket.c:1803
__do_sys_socketpair net/socket.c:1856 [inline]
__se_sys_socketpair net/socket.c:1853 [inline]
__x64_sys_socketpair+0x9b/0xb0 net/socket.c:1853
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 15:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x5c/0x80 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2685 [inline]
slab_free mm/slub.c:6165 [inline]
kmem_cache_free+0x187/0x630 mm/slub.c:6295
rcu_do_batch kernel/rcu/tree.c:
---truncated--- |
