| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Resolve soft lockup issue when opening /dev/sgX
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size. |
| The X25519 x86_64 assembly implementation fails to clear the most significant bit during the final modular reduction, so the computed result may not be fully reduced modulo the field prime 2^255 - 19. This can leave the field element in a non-canonical form, producing an incorrect result from the scalar multiplication and potentially a wrong shared secret. The final carry-propagation chains in the x64 and AVX2 reduction routines could overflow into the top bit, and the high limb was not masked afterward, so the 255-bit field element was left non-canonical. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: propagate nvmet_tcp_build_pdu_iovec() errors to its callers
Currently, when nvmet_tcp_build_pdu_iovec() detects an out-of-bounds
PDU length or offset, it triggers nvmet_tcp_fatal_error(cmd->queue)
and returns early. However, because the function returns void, the
callers are entirely unaware that a fatal error has occurred and
that the cmd->recv_msg.msg_iter was left uninitialized.
Callers such as nvmet_tcp_handle_h2c_data_pdu() proceed to blindly
overwrite the queue state with queue->rcv_state = NVMET_TCP_RECV_DATA
Consequently, the socket receiving loop may attempt to read incoming
network data into the uninitialized iterator.
Fix this by shifting the error handling responsibility to the callers. |
| A flaw was found in libssh versions built with OpenSSL versions older than 3.0, specifically in the ssh_kdf() function responsible for key derivation. Due to inconsistent interpretation of return values where OpenSSL uses 0 to indicate failure and libssh uses 0 for success—the function may mistakenly return a success status even when key derivation fails. This results in uninitialized cryptographic key buffers being used in subsequent communication, potentially compromising SSH sessions' confidentiality, integrity, and availability. |
| The resend_bytes function in roaming_common.c in the client in OpenSSH 5.x, 6.x, and 7.x before 7.1p2 allows remote servers to obtain sensitive information from process memory by requesting transmission of an entire buffer, as demonstrated by reading a private key. |
| Netatalk 2.1.0 through 4.4.2 combines multiple errno values using bitwise OR, resulting in incorrect error codes when multiple error conditions occur simultaneously, which may allow a remote attacker to cause a minor service disruption via conditions that trigger incorrect error-handling paths. |
| An incorrect calculation in the hextoint macro in Netatalk 2.0.0 through 4.4.2 due to improper uppercase character handling allows a remote authenticated attacker to cause limited data modification via crafted hexadecimal input. |
| Ledger Bitcoin app versions 2.1.0 and 2.1.1 contain an address derivation vulnerability that allows attackers to cause incorrect Bitcoin addresses to be displayed by exploiting improper handling of miniscript policies containing the a: fragment. Attackers can craft malicious miniscript policies that cause the device to derive and display incorrect receiving addresses, potentially leading to funds being sent to unintended addresses. |
| ZEBRA is a Zcash node written entirely in Rust. Prior to version 4.4.0, Zebra's block validator undercounts transparent signature operations against the 20000-sigop block limit (MAX_BLOCK_SIGOPS), allowing it to accept blocks that zcashd rejects with bad-blk-sigops. A miner who produces such a block can split the network: Zebra nodes follow the offending chain while zcashd nodes do not. This issue has been patched in version 4.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject mismatching sum of field_len with set key length
The field length description provides the length of each separated key
field in the concatenation, each field gets rounded up to 32-bits to
calculate the pipapo rule width from pipapo_init(). The set key length
provides the total size of the key aligned to 32-bits.
Register-based arithmetics still allows for combining mismatching set
key length and field length description, eg. set key length 10 and field
description [ 5, 4 ] leading to pipapo width of 12. |
| There is a floating point exception error in sixel_encoder_do_resize, encoder.c:633 in libsixel img2sixel 1.8.6. Remote attackers could leverage this vulnerability to cause a denial-of-service via a crafted JPEG file. |
| drivers/net/r8169.c in the r8169 driver in the Linux kernel 2.6.32.3 and earlier does not properly check the size of an Ethernet frame that exceeds the MTU, which allows remote attackers to (1) cause a denial of service (temporary network outage) via a packet with a crafted size, in conjunction with certain packets containing A characters and certain packets containing E characters; or (2) cause a denial of service (system crash) via a packet with a crafted size, in conjunction with certain packets containing '\0' characters, related to the value of the status register and erroneous behavior associated with the RxMaxSize register. NOTE: this vulnerability exists because of an incorrect fix for CVE-2009-1389. |
| When using a TarFile.errorlevel = 0 and extracting with a filter the documented behavior is that any filtered members would be skipped and not extracted. However the actual behavior of TarFile.errorlevel = 0 in affected versions is that the member would still be extracted and not skipped. |
| goxmlsig provides XML Digital Signatures implemented in Go. Prior to version 1.6.0, the `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1.22, or when `go.mod` uses an older version, there is a loop variable capture issue. The code takes the address of the loop variable `_ref` instead of its value. As a result, if more than one reference matches the ID or if the loop logic is incorrect, the `ref` pointer will always end up pointing to the last element in the `SignedInfo.References` slice after the loop. goxmlsig version 1.6.0 contains a patch. |
| A flaw was found in gix-date. The `gix_date::parse::TimeBuf::as_str` function can generate strings containing invalid non-UTF8 characters. This issue violates the internal safety invariants of the `TimeBuf` component, leading to undefined behavior when these malformed strings are subsequently processed. This could potentially result in application instability or other unforeseen consequences. |
| soroban-fixed-point-math is a fixed-point math library for Soroban smart contacts. In versions 1.3.0 and 1.4.0, the `mulDiv(x, y, z)` function incorrectly handled cases where both the intermediate product $x * y$ and the divisor $z$ were negative. The logic assumed that if the intermediate product was negative, the final result must also be negative, neglecting the sign of $z$. This resulted in rounding being applied in the wrong direction for cases where both $x * y$ and $z$ were negative. The functions most at risk are `fixed_div_floor` and `fixed_div_ceil`, as they often use non-constant numbers as the divisor $z$ in `mulDiv`. This error is present in all signed `FixedPoint` and `SorobanFixedPoint` implementations, including `i64`, `i128`, and `I256`. Versions 1.3.1 and 1.4.1 contain a patch. No known workarounds for this issue are available. |
| An Incorrect Calculation vulnerability in the Layer 2 Control
Protocol
Daemon (l2cpd) of Juniper Networks Junos OS Evolved allows an unauthenticated network-adjacent attacker flapping the management interface to cause the learning of new MACs over label-switched interfaces (LSI) to stop while generating a flood of logs, resulting in high CPU usage.
When the issue is seen, the following log message will be generated:
op:1 flag:0x6 mac:xx:xx:xx:xx:xx:xx bd:2 ifl:13302 reason:0(REASON_NONE) i-op:6(INTRNL_OP_HW_FORCE_DELETE) status:10 lstatus:10 err:26(GETIFBD_VALIDATE_FAILED) err-reason 4(IFBD_VALIDATE_FAIL_EPOCH_MISMATCH) hw_wr:0x4 ctxsync:0 fwdsync:0 rtt-id:51 p_ifl:0 fwd_nh:0 svlbnh:0 event:- smask:0x100000000 dmask:0x0 mplsmask 0x1 act:0x5800 extf:0x0 pfe-id 0 hw-notif-ifl 13302 programmed-ifl 4294967295 pseudo-vtep underlay-ifl-idx 0 stack:GET_MAC, ALLOCATE_MAC, GET_IFL, GET_IFF, GET_IFBD, STOP,
This issue affects Junos OS Evolved:
* all versions before 21.4R3-S7-EVO,
* from 22.2 before 22.2R3-S4-EVO,
* from 22.3 before 22.3R3-S3-EVO,
* from 22.4 before 22.4R3-S2-EVO,
* from 23.2 before 23.2R2-S1-EVO,
* from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to 2.3.1.4, SrcPixel and DestPixel stack buffers overlap in CIccTagMultiProcessElement::Apply() int IccTagMPE.cpp. This vulnerability is fixed in 2.3.1.4. |
| The CombinedMult function in the CIRCL ecc/p384 package (secp384r1 curve) produces an incorrect value for specific inputs. The issue is fixed by using complete addition formulas.
ECDH and ECDSA signing relying on this curve are not affected.
The bug was fixed in v1.6.3 https://github.com/cloudflare/circl/releases/tag/v1.6.3 . |
| The Graph is an indexing protocol for querying networks like Ethereum, IPFS, Polygon, and other blockchains. Prior to version 3.0.0, a flaw in the token vesting contracts allows users to access tokens that should still be locked according to their vesting schedule. This issue has been patched in version 3.0.0. |
