| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A race condition in Grafana Live allows authenticated users with Viewer role to trigger a server crash by sending concurrent requests that cause a fatal map access error. This results in complete service unavailability requiring restart of the Grafana server. |
| Incorrect Authorization vulnerabilities in Trust Protection Foundation allow attackers to bypass access controls and perform unauthorized actions on restricted resources. |
| Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected
preferred key exchange group when its key exchange group configuration includes
the default by using the 'DEFAULT' keyword.
Impact summary: A less preferred key exchange may be used even when a more
preferred group is supported by both client and server, if the group
was not included among the client's initial predicated keyshares.
This will sometimes be the case with the new hybrid post-quantum groups,
if the client chooses to defer their use until specifically requested by
the server.
If an OpenSSL TLS 1.3 server's configuration uses the 'DEFAULT' keyword to
interpolate the built-in default group list into its own configuration, perhaps
adding or removing specific elements, then an implementation defect causes the
'DEFAULT' list to lose its 'tuple' structure, and all server-supported groups
were treated as a single sufficiently secure 'tuple', with the server not
sending a Hello Retry Request (HRR) even when a group in a more preferred tuple
was mutually supported.
As a result, the client and server might fail to negotiate a mutually supported
post-quantum key agreement group, such as 'X25519MLKEM768', if the client's
configuration results in only 'classical' groups (such as 'X25519' being the
only ones in the client's initial keyshare prediction).
OpenSSL 3.5 and later support a new syntax for selecting the most preferred TLS
1.3 key agreement group on TLS servers. The old syntax had a single 'flat'
list of groups, and treated all the supported groups as sufficiently secure.
If any of the keyshares predicted by the client were supported by the server
the most preferred among these was selected, even if other groups supported by
the client, but not included in the list of predicted keyshares would have been
more preferred, if included.
The new syntax partitions the groups into distinct 'tuples' of roughly
equivalent security. Within each tuple the most preferred group included among
the client's predicted keyshares is chosen, but if the client supports a group
from a more preferred tuple, but did not predict any corresponding keyshares,
the server will ask the client to retry the ClientHello (by issuing a Hello
Retry Request or HRR) with the most preferred mutually supported group.
The above works as expected when the server's configuration uses the built-in
default group list, or explicitly defines its own list by directly defining the
various desired groups and group 'tuples'.
No OpenSSL FIPS modules are affected by this issue, the code in question lies
outside the FIPS boundary.
OpenSSL 3.6 and 3.5 are vulnerable to this issue.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.2 once it is released.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.6 once it is released.
OpenSSL 3.4, 3.3, 3.0, 1.0.2 and 1.1.1 are not affected by this issue. |
| Multiple denial of service vulnerabilities in Palo Alto Networks PAN-OS® software allow an unauthenticated attacker with network access to cause a denial of service (DoS) condition by sending specially crafted network traffic.
Panorama and Cloud NGFW are not impacted by these vulnerabilities. |
| A race condition vulnerability in Palo Alto Networks Prisma® Browser enables a locally authenticated non-admin user to bypass certain access and data control policies. |
| ELECOM wireless LAN access point devices do not check if language parameter has an appropriate value. If a user views a malicious page while logged in, the admin page on the user's web browser may become broken. |
| multiparty@4.2.3 and lower versions are vulnerable to denial of service via uncaught exception. By sending a multipart/form-data request with a Content-Disposition header whose filename* parameter contains a malformed percent-encoding, the parser invokes decodeURI on the value without try/catch. The resulting URIError propagates as an uncaught exception and crashes the process. Impact: any service accepting multipart uploads via multiparty is affected. Workarounds: none. Upgrade to multiparty@4.3.0 or higher. |
| Granian is a Rust HTTP server for Python applications. From 0.2.0 to 2.7.4, Granian aborts a worker process if a WSGI application returns an invalid HTTP response header name or value. The WSGI response conversion path uses .unwrap() on both the header name and header value constructors, so malformed output from the application becomes a process abort instead of a handled error. This vulnerability is fixed in 2.7.4. |
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Issue summary: Applications using RSASVE key encapsulation to establish
a secret encryption key can send contents of an uninitialized memory buffer to
a malicious peer.
Impact summary: The uninitialized buffer might contain sensitive data from the
previous execution of the application process which leads to sensitive data
leakage to an attacker.
RSA_public_encrypt() returns the number of bytes written on success and -1
on error. The affected code tests only whether the return value is non-zero.
As a result, if RSA encryption fails, encapsulation can still return success to
the caller, set the output lengths, and leave the caller to use the contents of
the ciphertext buffer as if a valid KEM ciphertext had been produced.
If applications use EVP_PKEY_encapsulate() with RSA/RSASVE on an
attacker-supplied invalid RSA public key without first validating that key,
then this may cause stale or uninitialized contents of the caller-provided
ciphertext buffer to be disclosed to the attacker in place of the KEM
ciphertext.
As a workaround calling EVP_PKEY_public_check() or
EVP_PKEY_public_check_quick() before EVP_PKEY_encapsulate() will mitigate
the issue.
The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.1 and 3.0 are affected by this issue. |
| Issue summary: A type confusion vulnerability exists in the signature
verification of signed PKCS#7 data where an ASN1_TYPE union member is
accessed without first validating the type, causing an invalid or NULL
pointer dereference when processing malformed PKCS#7 data.
Impact summary: An application performing signature verification of PKCS#7
data or calling directly the PKCS7_digest_from_attributes() function can be
caused to dereference an invalid or NULL pointer when reading, resulting in
a Denial of Service.
The function PKCS7_digest_from_attributes() accesses the message digest attribute
value without validating its type. When the type is not V_ASN1_OCTET_STRING,
this results in accessing invalid memory through the ASN1_TYPE union, causing
a crash.
Exploiting this vulnerability requires an attacker to provide a malformed
signed PKCS#7 to an application that verifies it. The impact of the
exploit is just a Denial of Service, the PKCS7 API is legacy and applications
should be using the CMS API instead. For these reasons the issue was
assessed as Low severity.
The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| Issue summary: An invalid or NULL pointer dereference can happen in
an application processing a malformed PKCS#12 file.
Impact summary: An application processing a malformed PKCS#12 file can be
caused to dereference an invalid or NULL pointer on memory read, resulting
in a Denial of Service.
A type confusion vulnerability exists in PKCS#12 parsing code where
an ASN1_TYPE union member is accessed without first validating the type,
causing an invalid pointer read.
The location is constrained to a 1-byte address space, meaning any
attempted pointer manipulation can only target addresses between 0x00 and 0xFF.
This range corresponds to the zero page, which is unmapped on most modern
operating systems and will reliably result in a crash, leading only to a
Denial of Service. Exploiting this issue also requires a user or application
to process a maliciously crafted PKCS#12 file. It is uncommon to accept
untrusted PKCS#12 files in applications as they are usually used to store
private keys which are trusted by definition. For these reasons, the issue
was assessed as Low severity.
The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS12 implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.
OpenSSL 1.0.2 is not affected by this issue. |
| Issue summary: A type confusion vulnerability exists in the TimeStamp Response
verification code where an ASN1_TYPE union member is accessed without first
validating the type, causing an invalid or NULL pointer dereference when
processing a malformed TimeStamp Response file.
Impact summary: An application calling TS_RESP_verify_response() with a
malformed TimeStamp Response can be caused to dereference an invalid or
NULL pointer when reading, resulting in a Denial of Service.
The functions ossl_ess_get_signing_cert() and ossl_ess_get_signing_cert_v2()
access the signing cert attribute value without validating its type.
When the type is not V_ASN1_SEQUENCE, this results in accessing invalid memory
through the ASN1_TYPE union, causing a crash.
Exploiting this vulnerability requires an attacker to provide a malformed
TimeStamp Response to an application that verifies timestamp responses. The
TimeStamp protocol (RFC 3161) is not widely used and the impact of the
exploit is just a Denial of Service. For these reasons the issue was
assessed as Low severity.
The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the TimeStamp Response implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.
OpenSSL 1.0.2 is not affected by this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix error path in multi-packet WQE transmit
Remove the erroneous unmap in case no DMA mapping was established
The multi-packet WQE transmit code attempts to obtain a DMA mapping for
the skb. This could fail, e.g. under memory pressure, when the IOMMU
driver just can't allocate more memory for page tables. While the code
tries to handle this in the path below the err_unmap label it erroneously
unmaps one entry from the sq's FIFO list of active mappings. Since the
current map attempt failed this unmap is removing some random DMA mapping
that might still be required. If the PCI function now presents that IOVA,
the IOMMU may assumes a rogue DMA access and e.g. on s390 puts the PCI
function in error state.
The erroneous behavior was seen in a stress-test environment that created
memory pressure. |
| A type check was missing when handling fonts in PDF.js, which would allow arbitrary JavaScript execution in the PDF.js context. This vulnerability affects Firefox < 126, Firefox ESR < 115.11, and Thunderbird < 115.11. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mtrr: Check if fixed MTRRs exist before saving them
MTRRs have an obsolete fixed variant for fine grained caching control
of the 640K-1MB region that uses separate MSRs. This fixed variant has
a separate capability bit in the MTRR capability MSR.
So far all x86 CPUs which support MTRR have this separate bit set, so it
went unnoticed that mtrr_save_state() does not check the capability bit
before accessing the fixed MTRR MSRs.
Though on a CPU that does not support the fixed MTRR capability this
results in a #GP. The #GP itself is harmless because the RDMSR fault is
handled gracefully, but results in a WARN_ON().
Add the missing capability check to prevent this. |
| create_empty_lvol in drivers/mtd/ubi/vtbl.c in the Linux kernel through 6.7.4 can attempt to allocate zero bytes, and crash, because of a missing check for ubi->leb_size. |
| Issue summary: Generating excessively long X9.42 DH keys or checking
excessively long X9.42 DH keys or parameters may be very slow.
Impact summary: Applications that use the functions DH_generate_key() to
generate an X9.42 DH key may experience long delays. Likewise, applications
that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check()
to check an X9.42 DH key or X9.42 DH parameters may experience long delays.
Where the key or parameters that are being checked have been obtained from
an untrusted source this may lead to a Denial of Service.
While DH_check() performs all the necessary checks (as of CVE-2023-3817),
DH_check_pub_key() doesn't make any of these checks, and is therefore
vulnerable for excessively large P and Q parameters.
Likewise, while DH_generate_key() performs a check for an excessively large
P, it doesn't check for an excessively large Q.
An application that calls DH_generate_key() or DH_check_pub_key() and
supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
DH_generate_key() and DH_check_pub_key() are also called by a number of
other OpenSSL functions. An application calling any of those other
functions may similarly be affected. The other functions affected by this
are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate().
Also vulnerable are the OpenSSL pkey command line application when using the
"-pubcheck" option, as well as the OpenSSL genpkey command line application.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. |
| Clerk JavaScript is the official JavaScript repository for Clerk authentication. has(), auth.protect(), and related authorization predicates in @clerk/shared, @clerk/nextjs, @clerk/backend, and other framework SDKs can return true for certain combined authorization checks when the result should be false, allowing a gated action to proceed for a user who does not satisfy the full set of requested conditions. This call shape can be bypassed if certain conditions are met: a has() or auth.protect() call that combines a reverification check with any of role, permission, feature, or plan, or that combines a billing check (feature or plan) with a role or permission check. This vulnerability is fixed in @clerk/clerk-js 5.125.10 and 6.7.5. |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.3.10, 0.4.24, 0.5.14, and 0.6.4, a man-in-the-middle attacker can cause Net::IMAP#starttls to return "successfully", without starting TLS. This issue has been patched in versions 0.3.10, 0.4.24, 0.5.14, and 0.6.4. |
