| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg-msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer. Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer. The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet. The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0. |
| dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). |
| A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP (Dynamic Host Configuration Protocol) options, such as a malicious hostname, to a system using dracut's legacy DHCP path. These options are improperly handled and written into temporary shell scripts without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs, potentially compromising the system's boot and network behavior. |
| mise manages dev tools like node, python, cmake, and terraform. From 2026.3.15 until 2026.6.4, mise loads github.credential_command from local project config before any trust decision, then executes that value with sh -c when resolving a GitHub token. An attacker who can place a .mise.toml in a repository can execute arbitrary shell commands when the victim runs a GitHub-related mise command and no higher-priority GitHub token environment variable is set. This vulnerability is fixed in 2026.6.4. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc()
Fix inverted condition that skips frequency change trigger,
causing kernel panics during cpufreq scaling. |
| Kestra is an open-source, event-driven orchestration platform. Prior to 1.0.45 and 1.3.21, AuthenticationFilter in Kestra OSS uses request.getPath().endsWith("/configs") to whitelist the public configuration endpoint from Basic Auth. Because the check is a suffix match rather than an exact path match, any API path whose last segment is configs bypasses authentication entirely. An unauthenticated remote attacker can exploit this to create and execute arbitrary workflows without credentials. Because Kestra ships with script execution plugins (plugin-script-shell, plugin-script-python, etc.) enabled by default, this directly results in unauthenticated Remote Code Execution as root inside the Kestra worker container. This vulnerability is fixed in 1.0.45 and 1.3.21. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Reserve an extra page for early kernel mapping
The final part of [data, end) segment may overflow into the next page of
init_pg_end[1] which is the gap page before early_init_stack[2]:
[1]
crash_arm64_v9.0.1> vtop ffffffed00601000
VIRTUAL PHYSICAL
ffffffed00601000 83401000
PAGE DIRECTORY: ffffffecffd62000
PGD: ffffffecffd62da0 => 10000000833fb003
PMD: ffffff80033fb018 => 10000000833fe003
PTE: ffffff80033fe008 => 68000083401f03
PAGE: 83401000
PTE PHYSICAL FLAGS
68000083401f03 83401000 (VALID|SHARED|AF|NG|PXN|UXN)
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
fffffffec00d0040 83401000 0 0 1 4000 reserved
[2]
ffffffed002c8000 (r) __pi__data
ffffffed0054e000 (d) __pi___bss_start
ffffffed005f5000 (b) __pi_init_pg_dir
ffffffed005fe000 (b) __pi_init_pg_end
ffffffed005ff000 (B) early_init_stack
ffffffed00608000 (b) __pi__end
For 4K pages, the early kernel mapping may use 2MB block entries but the
kernel segments are only 64KB aligned. Segment boundaries that fall
within a 2MB block therefore require a PTE table so that different
attributes can be applied on either side of the boundary.
KERNEL_SEGMENT_COUNT still correctly counts the five permanent kernel
VMAs registered by declare_kernel_vmas(). However, since commit
5973a62efa34 ("arm64: map [_text, _stext) virtual address range
non-executable+read-only"), the early mapper also maps [_text, _stext)
separately from [_stext, _etext). This adds one more early-only split
and can require one more page-table page than the existing
EARLY_SEGMENT_EXTRA_PAGES allowance reserves.
Increase the 4K-page early mapping allowance by one page to cover that
additional split.
[catalin.marinas@arm.com: rewrote part of the commit log]
[catalin.marinas@arm.com: expanded the code comment] |
| mise manages dev tools like node, python, cmake, and terraform. Prior to 2026.6.4, mise's trust feature gates config files (mise.toml, .tool-versions) through trust_check, but task-include files are loaded on a path that never reaches it. When a directory has a task-include dir (mise-tasks/, .mise/tasks/, …) but no config file, mise falls back to the default includes and renders each task's tera fields — and that tera environment has exec() registered. A {{ exec(command='…') }} in any rendered field runs arbitrary commands the moment the tasks are merely listed. There's no config file to gate on, so no trust prompt ever appears. Read-only commands trigger it: mise tasks, mise task ls, mise run, mise tasks --usage (the query shell completion runs on Tab). The victim only has to cd into a cloned repo and list or tab-complete a task. This vulnerability is fixed in 2026.6.4. |
| A vulnerability exists in H.View IP cameras that could allow an authenticated user to supply unsanitized XML fields to the device's certificate generation interface, which are incorporated into a backend certificate creation command without proper input validation. This may allow for command execution with elevated privileges during certificate generation. |
| The TIFF decoder can panic when decoding an invalid image with an out-of-bounds strip offset. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: hvc_iucv: fix off-by-one in number of supported devices
MAX_HVC_IUCV_LINES == HVC_ALLOC_TTY_ADAPTERS == 8.
This is the number of entries in:
static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES];
Sometimes hvc_iucv_table[] is limited by:
(a) if (num > hvc_iucv_devices) // for error detection
or
(b) for (i = 0; i < hvc_iucv_devices; i++) // in 2 places
(so these 2 don't agree; second one appears to be correct to me.)
hvc_iucv_devices can be 0..8. This is a counter.
(c) if (hvc_iucv_devices > MAX_HVC_IUCV_LINES)
If hvc_iucv_devices == 8, (a) allows the code to access hvc_iucv_table[8].
Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: Push kjump return address even for non-kjump kexec
The version of purgatory code shipped by kexec-tools attempts to look above
the top of its stack to find a return address for a kjump, even in a non-kjump
kexec.
After the commit in Fixes: the word above the stack might not be there,
leading to a fault (which is at least now caught by my exception-handling code
in kexec).
That commit fixed things for the actual kjump path, but no longer
"gratuitously" pushes the unused return address to the stack in the non-kjump
path. Put that *back* in the non-kjump path, to prevent purgatory from
crashing when trying to access it. |
| A command
injection vulnerability has been identified in the DHCP option processing logic
in multiple TP-Link router models, due to insufficient validation of externally
supplied DHCP option data. An adjacent attacker may exploit this
vulnerability by supplying crafted DHCP responses, potentially resulting in unauthorized
command execution during device initialization or provisioning workflows. This
typically occurs when the device is in a factory-default or unconfigured state.
Successful
exploitation may allow an adjacent, unauthenticated attacker to execute
arbitrary commands with elevated privileges, potentially leading to full
compromise of the affected device and unauthorized administrative control. |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.6.1, the <GUIConfig name="commandLineInterpreter"> tag in config.xml is read by NppXml::value() (Parameters.cpp:6430) and stored in _nppGUI._commandLineInterpreter without any validation, whitelist, or digital signature check. When the user triggers IDM_FILE_OPEN_CMD (File → Open Containing Folder → cmd), NppCommands.cpp:228 creates a Command object with this value and calls run(), which invokes ShellExecute (RunDlg.cpp:221) with the attacker-controlled string as the executable path. This vulnerability is fixed in 8.9.6.1. |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.6.1, the <Command> tag text content inside <UserDefinedCommands> in shortcuts.xml is read by NppXml::value(aNode) (Parameters.cpp:3658) in the feedUserCmds() function and stored in UserCommand._cmd without any validation. When the user clicks the corresponding entry in the Run menu, NppCommands.cpp:4264 creates a Command object with string2wstring(ucmd.getCmd()) and calls run(), which invokes ShellExecute (RunDlg.cpp:221) with the attacker-controlled string as the executable path. The injected command appears as a normal menu item in the Run menu, making it a viable persistence mechanism. This vulnerability is fixed in 8.9.6.1. |
| Cudy LT300 3.0 running firmware prior to version 2.5.12 contains an OS command injection vulnerability that allows authenticated attackers to execute arbitrary commands by injecting shell metacharacters into the cbid.system.ntp.current POST parameter in the system time configuration interface. Attackers can submit malicious payloads through the NTP settings endpoint to achieve remote code execution on the underlying system. |
| The TIFF decoder does not set a limit on the size of tiles in tiled images, permitting a malicious or corrupt image containing a very large tile to cause unbounded memory consumption. |
| Vim is an open source, command line text editor. Prior to 9.2.0662, the dump_prefixes() function in src/spell.c walks a spell-file prefix trie iteratively with a depth counter while dumping the prefixes that apply to a word. The counter is bounded only by the trie structure itself; it is never checked against the size of the fixed MAXWLEN-element stack arrays it indexes (prefix[], arridx[], curi[]). A crafted .spl file, loaded when the user dumps the word list, can drive the descent arbitrarily deep, so the function writes past the end of those arrays. This is a stack out-of-bounds write that corrupts the call frame and crashes the editor. This vulnerability is fixed in 9.2.0662. |
| Dokku is a docker-powered PaaS. Prior to 0.38.2, the app name validation regex (^[a-z0-9][^/:_A-Z]*$) permits shell metacharacters. When an authenticated user pushes to a git remote with a crafted app name, the name is embedded unquoted into a bash pre-receive hook script via an unquoted heredoc (<<EOF instead of <<'EOF') in fn-git-create-hook() at plugins/git/internal-functions:378. On git push, bash interprets the semicolon as a command separator, executing arbitrary commands as the dokku user. This vulnerability is fixed in 0.38.2. |
| Dell Dell Container Storage Modules, version(s) csi-powerstore v2.16.0, csi-unity v2.16.0, csi-powerflex v2.16.0, csi-powermax v2.16.0, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
