Export limit exceeded: 351284 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 351284 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (351284 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-20717 | 1 Intel | 2 Qat Drivers, Quickassist Technology | 2026-05-15 | 6.6 Medium |
| Improper input validation for some Intel(R) QAT software drivers for Windows before version 1.13 within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. | ||||
| CVE-2026-43325 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't send a 6E related command when not supported MCC_ALLOWED_AP_TYPE_CMD is related to 6E support. Do not send it if the device doesn't support 6E. Apparently, the firmware is mistakenly advertising support for this command even on AX201 which does not support 6E and then the firmware crashes. | ||||
| CVE-2026-31220 | 1 Openmined | 1 Pysyft | 2026-05-15 | 9.8 Critical |
| PySyft (Syft Datasite/Server) versions 0.9.5 and earlier are vulnerable to remote code execution due to insufficient validation and sandboxing of user-submitted code. The system allows low-privileged users to submit Python functions (via @sy.syft_function()) for remote execution on the server. While a code approval mechanism exists, the submitted code undergoes no security checks for dangerous operations (e.g., file access, command execution). Once approved, the code is executed within the server process using exec() and eval() functions without proper isolation. A remote attacker can leverage this to execute arbitrary Python code on the server, leading to complete compromise of the server environment. | ||||
| CVE-2026-43335 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: qcom: sm8450: Fix NULL pointer dereference in icc_link_nodes() The change to dynamic IDs for SM8450 platform interconnects left two links unconverted, fix it to avoid the NULL pointer dereference in runtime, when a pointer to a destination interconnect is not valid: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 <...> Call trace: icc_link_nodes+0x3c/0x100 (P) qcom_icc_rpmh_probe+0x1b4/0x528 platform_probe+0x64/0xc0 really_probe+0xc4/0x2a8 __driver_probe_device+0x80/0x140 driver_probe_device+0x48/0x170 __device_attach_driver+0xc0/0x148 bus_for_each_drv+0x88/0xf0 __device_attach+0xb0/0x1c0 device_initial_probe+0x58/0x68 bus_probe_device+0x40/0xb8 deferred_probe_work_func+0x90/0xd0 process_one_work+0x15c/0x3c0 worker_thread+0x2e8/0x400 kthread+0x150/0x208 ret_from_fork+0x10/0x20 Code: 900310f4 911d6294 91008280 94176078 (f94002a0) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception | ||||
| CVE-2026-1659 | 1 Gitlab | 1 Gitlab | 2026-05-15 | 7.5 High |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 9.0 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an unauthenticated user to cause denial of service by sending specially crafted requests due to insufficient input validation. | ||||
| CVE-2026-3607 | 1 Gitlab | 1 Gitlab | 2026-05-15 | 4.3 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.3 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an authenticated user with developer-role permissions to bypass package protection rules due to improper access control. | ||||
| CVE-2026-4524 | 1 Gitlab | 1 Gitlab | 2026-05-15 | 6.5 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.9.1 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an authenticated user to access confidential issue content in public projects without proper authorization due to improper authorization checks. | ||||
| CVE-2026-43337 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference in dcn401_init_hw() dcn401_init_hw() assumes that update_bw_bounding_box() is valid when entering the update path. However, the existing condition: ((!fams2_enable && update_bw_bounding_box) || freq_changed) does not guarantee this, as the freq_changed branch can evaluate to true independently of the callback pointer. This can result in calling update_bw_bounding_box() when it is NULL. Fix this by separating the update condition from the pointer checks and ensuring the callback, dc->clk_mgr, and bw_params are validated before use. Fixes the below: ../dc/hwss/dcn401/dcn401_hwseq.c:367 dcn401_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 362) (cherry picked from commit 86117c5ab42f21562fedb0a64bffea3ee5fcd477) | ||||
| CVE-2026-4527 | 1 Gitlab | 1 Gitlab | 2026-05-15 | 6.5 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 11.10 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an unauthenticated user to create unauthorized Jira subscriptions for a targeted user's namespace via a specially crafted link due to missing CSRF protection. | ||||
| CVE-2026-6335 | 1 Gitlab | 1 Gitlab | 2026-05-15 | 5.4 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.11 before 18.11.3 that under certain conditions could have allowed an authenticated user to execute arbitrary code in another user's browser session due to improper sanitization. | ||||
| CVE-2026-43306 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: crypto: Use the correct destructor kfunc type With CONFIG_CFI enabled, the kernel strictly enforces that indirect function calls use a function pointer type that matches the target function. I ran into the following type mismatch when running BPF self-tests: CFI failure at bpf_obj_free_fields+0x190/0x238 (target: bpf_crypto_ctx_release+0x0/0x94; expected type: 0xa488ebfc) Internal error: Oops - CFI: 00000000f2008228 [#1] SMP ... As bpf_crypto_ctx_release() is also used in BPF programs and using a void pointer as the argument would make the verifier unhappy, add a simple stub function with the correct type and register it as the destructor kfunc instead. | ||||
| CVE-2026-43307 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: adxl380: Avoid reading more entries than present in FIFO The interrupt handler reads FIFO entries in batches of N samples, where N is the number of scan elements that have been enabled. However, the sensor fills the FIFO one sample at a time, even when more than one channel is enabled. Therefore,the number of entries reported by the FIFO status registers may not be a multiple of N; if this number is not a multiple, the number of entries read from the FIFO may exceed the number of entries actually present. To fix the above issue, round down the number of FIFO entries read from the status registers so that it is always a multiple of N. | ||||
| CVE-2026-43339 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UaF in addrconf_permanent_addr() The mentioned helper try to warn the user about an exceptional condition, but the message is delivered too late, accessing the ipv6 after its possible deletion. Reorder the statement to avoid the possible UaF; while at it, place the warning outside the idev->lock as it needs no protection. | ||||
| CVE-2026-43340 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: Reinit dev->spinlock between attachments to low-level drivers `struct comedi_device` is the main controlling structure for a COMEDI device created by the COMEDI subsystem. It contains a member `spinlock` containing a spin-lock that is initialized by the COMEDI subsystem, but is reserved for use by a low-level driver attached to the COMEDI device (at least since commit 25436dc9d84f ("Staging: comedi: remove RT code")). Some COMEDI devices (those created on initialization of the COMEDI subsystem when the "comedi.comedi_num_legacy_minors" parameter is non-zero) can be attached to different low-level drivers over their lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in inconsistent lock states being reported when there is a mismatch in the spin-lock locking levels used by each low-level driver to which the COMEDI device has been attached. Fix it by reinitializing `dev->spinlock` before calling the low-level driver's `attach` function pointer if `CONFIG_LOCKDEP` is enabled. | ||||
| CVE-2026-43341 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/ipv6: ioam6: prevent schema length wraparound in trace fill ioam6_fill_trace_data() stores the schema contribution to the trace length in a u8. With bit 22 enabled and the largest schema payload, sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the remaining-space check. __ioam6_fill_trace_data() then positions the write cursor without reserving the schema area but still copies the 4-byte schema header and the full schema payload, overrunning the trace buffer. Keep sclen in an unsigned int so the remaining-space check and the write cursor calculation both see the full schema length. | ||||
| CVE-2026-43907 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-05-15 | 8.3 High |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, a signed integer overflow in QueryRGBBufferSizeInternal() in DPXColorConverter.cpp leads to a heap-based out-of-bounds write when processing crafted DPX image files. The function computes buffer sizes using 32-bit signed integer arithmetic with negative multipliers (e.g., pixels * -3 * bytes for kCbYCr descriptors and pixels * -4 * bytes for kABGR descriptors), where a negative result is used as an in-band signal that no separate buffer is needed. When the pixel count is sufficiently large, the multiplication overflows INT_MIN and wraps to a small positive value. The caller in dpxinput.cpp interprets this positive value as a required buffer size, allocates an undersized heap buffer via m_decodebuf.resize(), and then writes the full image data into it via fread, resulting in a heap buffer overflow. An attacker can exploit this by crafting a DPX file that triggers the overflow, causing a denial of service (crash) or potentially arbitrary code execution through heap corruption in any application that reads pixel data using OpenImageIO. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. | ||||
| CVE-2026-43905 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-05-15 | 7.8 High |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, jpeg2000input.cpp:395 computes buffer size as const int bufsize = w * h * ch * buffer_bpp using signed 32-bit arithmetic. When the product exceeds INT_MAX, the result wraps to 0 or a small value. m_buf.resize() allocates an undersized buffer, and subsequent pixel write loops cause heap overflow. Conditional on USE_OPENJPH build flag. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. | ||||
| CVE-2026-43903 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-05-15 | 7.8 High |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, sgiinput.cpp:265,274 use OIIO_DASSERT for bounds checking in the RLE decode loop. In release builds, OIIO_DASSERT compiles to ((void)sizeof(x)) (dassert.h:210), making all bounds checks no-ops. A crafted .sgi file with RLE count exceeding scanline width causes heap buffer overflow and crash. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. | ||||
| CVE-2026-43906 | 1 Openimageio | 1 Openimageio | 2026-05-15 | 7.8 High |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, a heap-based buffer overflow in the HEIF decoder of OpenImageIO allows out-of-bounds writes via crafted images due to a subimage metadata mismatch, leading to memory corruption and potential code execution. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. | ||||
| CVE-2026-42295 | 1 Argoproj | 2 Argo-workflows, Argo Workflows | 2026-05-15 | 4.9 Medium |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. From version 4.0.0 to before version 4.0.5, the workflow executor logs all artifact repository credentials (S3 access keys, secret keys, GCS service account keys, Azure account keys, Git passwords, etc.) in plaintext on artifact operation. Any user with read access to workflow pod logs can extract these credentials. This issue has been patched in version 4.0.5. | ||||