Export limit exceeded: 19005 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25411 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 20386 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20386 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31690 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: thead: Fix buffer overflow and use standard endian macros Addresses two issues in the TH1520 AON firmware protocol driver: 1. Fix a potential buffer overflow where the code used unsafe pointer arithmetic to access the 'mode' field through the 'resource' pointer with an offset. This was flagged by Smatch static checker as: "buffer overflow 'data' 2 <= 3" 2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard kernel endianness conversion macros (cpu_to_be16, etc.) for better portability and maintainability. The functionality was re-tested with the GPU power-up sequence, confirming the GPU powers up correctly and the driver probes successfully. [ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware powervr/rogue_36.52.104.182_v1.fw [ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build 6645434 OS) [ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on minor 0 | ||||
| CVE-2026-41036 | 2 Qntmnet, Quantum Networks | 3 Qn-i-470, Qn-i-470 Firmware, Router Qn-i-470 | 2026-05-06 | 8.8 High |
| This vulnerability exists in Quantum Networks router due to inadequate sanitization of user-supplied input in the management CLI interface. An authenticated remote attacker could exploit this vulnerability by injecting arbitrary OS commands on the targeted device. Successful exploitation of this vulnerability could allow the attacker to perform remote code execution with root privileges on the targeted device. | ||||
| CVE-2026-42440 | 1 Apache | 1 Opennlp | 2026-05-06 | 7.5 High |
| OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader Versions Affected: before 2.5.9 before 3.0.0-M3 Description: The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load. The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins. Mitigation: * 2.x users should upgrade to 2.5.9. * 3.x users should upgrade to 3.0.0-M3. Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks. | ||||
| CVE-2026-43868 | 1 Apache | 1 Thrift | 2026-05-06 | 5.3 Medium |
| Memory Allocation with Excessive Size Value vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue. | ||||
| CVE-2025-47404 | 1 Qualcomm | 377 215 Mobile, 215 Mobile Firmware, 5g Fixed Wireless Access and 374 more | 2026-05-06 | 6.5 Medium |
| Memory corruption when dynamically changing the size of a previously allocated buffer while its contents are being modified. | ||||
| CVE-2026-25266 | 1 Qualcomm | 49 Cologne, Cologne Firmware, Fastconnect 6900 and 46 more | 2026-05-06 | 5.5 Medium |
| Memory corruption while processing IOCTL command when device is in power-save state. | ||||
| CVE-2026-32203 | 3 Apple, Linux, Microsoft | 7 Macos, Linux Kernel, .net and 4 more | 2026-05-06 | 7.5 High |
| Stack-based buffer overflow in .NET and Visual Studio allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2025-15568 | 1 Tp-link | 2 Archer Axe75, Archer Axe75 Firmware | 2026-05-06 | 8.0 High |
| A command injection vulnerability was identified in the web module of Archer AXE75 v1.6/v1.0 router. An authenticated attacker with adjacent-network access may be able to perform remote code execution (RCE) when the router is configured with sysmode=ap. Successful exploitation results in root-level privileges and impacts confidentiality, integrity and availability of the device. This issue affects Archer AXE75 v1.6/v1.0: through 1.3.2 Build 20250107. | ||||
| CVE-2026-41926 | 1 Shenzhen Yuner Yipu | 1 Wifi Extender Wdr201a | 2026-05-06 | N/A |
| WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the firewall.cgi binary across five request handlers that apply insufficient input validation. Attackers can inject arbitrary shell commands through vulnerable parameters like websURLFilter, websHostFilter, portForward, singlePortForward, and ipportFilter using subshell syntax or unfiltered parameters, with payloads persisting in NVRAM and re-executing on every subsequent firewall.cgi request. | ||||
| CVE-2026-42146 | 1 Greyclab | 1 Cimg | 2026-05-06 | 5.5 Medium |
| CImg Library is a C++ library for image processing. Prior to commit c3aacf5, the nb_colors field read from the BMP file header is used directly to compute an allocation size without validating it against the remaining file size. A crafted BMP file with a large nb_colors value triggers an out-of-memory condition, crashing any application that uses CImg to load untrusted BMP files. This issue has been patched via commit c3aacf5. | ||||
| CVE-2026-41923 | 1 Shenzhen Yuner Yipu | 1 Wifi Extender Wdr201a | 2026-05-06 | N/A |
| WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the internet.cgi binary that allows unauthenticated remote attackers to execute arbitrary shell commands by injecting malicious input into the gateway POST parameter. Attackers can exploit unsanitized parameter concatenation in the set_add_routing function to inject shell commands that are executed via popen() with partial output reflected in the HTTP response. | ||||
| CVE-2026-41924 | 1 Shenzhen Yuner Yipu | 1 Wifi Extender Wdr201a | 2026-05-06 | N/A |
| WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the makeRequest.cgi binary that allows unauthenticated remote attackers to execute arbitrary shell commands by injecting malicious input into the set_time or StartSniffer functions. Attackers can craft a POST request with specially crafted ampersand-delimited parameters to bypass input sanitization and execute commands with a maximum length of 31 bytes through the date command or channel parameter processing. | ||||
| CVE-2026-41925 | 1 Shenzhen Yuner Yipu | 1 Wifi Extender Wdr201a | 2026-05-06 | N/A |
| WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the adm.cgi binary's reboot_time function that allows unauthenticated remote attackers to execute arbitrary shell commands by injecting malicious input into the reboot_time POST parameter. Attackers can send a crafted request with shell metacharacters in the reboot_time parameter when reboot_enabled=1 to achieve remote code execution. | ||||
| CVE-2026-7785 | 1 A-g-u-p-t-a | 1 Wireshark-mcp | 2026-05-06 | 7.3 High |
| A security flaw has been discovered in A-G-U-P-T-A wireshark-mcp edaf604416fbc94a201b4043092d4a1b09a12275/400c3da70074f22f3cce7ccb65304cafc7089c89. This affects the function quick_capture of the file pyshark_mcp.py. The manipulation results in os command injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-36355 | 1 Realtek | 1 Rtl8192cd | 2026-05-06 | 7.7 High |
| The rtl8192cd Wi-Fi kernel driver in the Realtek rtl819x Jungle SDK (all known versions through v3.4.14B) does not perform any access control checks on the write_mem (ioctl 0x89F5) and read_mem (ioctl 0x89F6) debug handlers, which are compiled into production builds via the unconditionally defined _IOCTL_DEBUG_CMD_ macro in 8192cd_cfg.h | ||||
| CVE-2026-36356 | 1 Meig | 1 Goahead | 2026-05-06 | 9.1 Critical |
| The GoAhead web server on MeiG Smart FORGE_SLT711 devices (firmware MDM9607.LE.1.0-00110-STD.PROD-1) allows unauthenticated OS command injection via the /action/SetRemoteAccessCfg endpoint. | ||||
| CVE-2025-71284 | 1 Synway | 1 Smg Gateway Management Software | 2026-05-05 | 9.8 Critical |
| Synway SMG Gateway Management Software contains an OS command injection vulnerability in the RADIUS configuration endpoint at /en/9-2radius.php where the radius_address POST parameter is split and interpolated directly into a sed command without sanitization. An unauthenticated remote attacker can inject arbitrary shell commands by submitting a POST request with crafted radius_address, radius_address2, shared_secret2, source_ip, timeout, or retry parameters along with save=1 and enable_radius=1 to achieve remote code execution. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-07-11 (UTC). | ||||
| CVE-2026-5435 | 3 Gnu, Redhat, The Gnu C Library | 3 Glibc, Hummingbird, Glibc | 2026-05-05 | 7.3 High |
| The deprecated functions ns_printrrf, ns_printrr and fp_nquery in the GNU C Library version 2.2 and newer fail to enforce the caller-supplied buffer length, and can result in an out-of-bounds write when printing TSIG records. | ||||
| CVE-2024-47698 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error Ensure index in rtl2832_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. [hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] | ||||
| CVE-2024-46853 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-05-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: nxp-fspi: fix the KASAN report out-of-bounds bug Change the memcpy length to fix the out-of-bounds issue when writing the data that is not 4 byte aligned to TX FIFO. To reproduce the issue, write 3 bytes data to NOR chip. dd if=3b of=/dev/mtd0 [ 36.926103] ================================================================== [ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838 [ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455 [ 36.946721] [ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070 [ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT) [ 36.961260] Call trace: [ 36.963723] dump_backtrace+0x90/0xe8 [ 36.967414] show_stack+0x18/0x24 [ 36.970749] dump_stack_lvl+0x78/0x90 [ 36.974451] print_report+0x114/0x5cc [ 36.978151] kasan_report+0xa4/0xf0 [ 36.981670] __asan_report_load_n_noabort+0x1c/0x28 [ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838 [ 36.990800] spi_mem_exec_op+0x8ec/0xd30 [ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0 [ 36.999323] spi_mem_dirmap_write+0x238/0x32c [ 37.003710] spi_nor_write_data+0x220/0x374 [ 37.007932] spi_nor_write+0x110/0x2e8 [ 37.011711] mtd_write_oob_std+0x154/0x1f0 [ 37.015838] mtd_write_oob+0x104/0x1d0 [ 37.019617] mtd_write+0xb8/0x12c [ 37.022953] mtdchar_write+0x224/0x47c [ 37.026732] vfs_write+0x1e4/0x8c8 [ 37.030163] ksys_write+0xec/0x1d0 [ 37.033586] __arm64_sys_write+0x6c/0x9c [ 37.037539] invoke_syscall+0x6c/0x258 [ 37.041327] el0_svc_common.constprop.0+0x160/0x22c [ 37.046244] do_el0_svc+0x44/0x5c [ 37.049589] el0_svc+0x38/0x78 [ 37.052681] el0t_64_sync_handler+0x13c/0x158 [ 37.057077] el0t_64_sync+0x190/0x194 [ 37.060775] [ 37.062274] Allocated by task 455: [ 37.065701] kasan_save_stack+0x2c/0x54 [ 37.069570] kasan_save_track+0x20/0x3c [ 37.073438] kasan_save_alloc_info+0x40/0x54 [ 37.077736] __kasan_kmalloc+0xa0/0xb8 [ 37.081515] __kmalloc_noprof+0x158/0x2f8 [ 37.085563] mtd_kmalloc_up_to+0x120/0x154 [ 37.089690] mtdchar_write+0x130/0x47c [ 37.093469] vfs_write+0x1e4/0x8c8 [ 37.096901] ksys_write+0xec/0x1d0 [ 37.100332] __arm64_sys_write+0x6c/0x9c [ 37.104287] invoke_syscall+0x6c/0x258 [ 37.108064] el0_svc_common.constprop.0+0x160/0x22c [ 37.112972] do_el0_svc+0x44/0x5c [ 37.116319] el0_svc+0x38/0x78 [ 37.119401] el0t_64_sync_handler+0x13c/0x158 [ 37.123788] el0t_64_sync+0x190/0x194 [ 37.127474] [ 37.128977] The buggy address belongs to the object at ffff00081037c2a0 [ 37.128977] which belongs to the cache kmalloc-8 of size 8 [ 37.141177] The buggy address is located 0 bytes inside of [ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3) [ 37.153465] [ 37.154971] The buggy address belongs to the physical page: [ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c [ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff) [ 37.175149] page_type: 0xfdffffff(slab) [ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000 [ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000 [ 37.194553] page dumped because: kasan: bad access detected [ 37.200144] [ 37.201647] Memory state around the buggy address: [ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc [ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc [ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc [ 37.228186] ^ [ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.246962] ============================================================== ---truncated--- | ||||