Export limit exceeded: 35239 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (35239 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43030 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix regsafe() for pointers to packet In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N regsafe() may return true which may lead to current state with valid packet range not being explored. Fix the bug. | ||||
| CVE-2026-43028 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: ensure names are nul-terminated Reject names that lack a \0 character before feeding them to functions that expect c-strings. Fixes tag is the most recent commit that needs this change. | ||||
| CVE-2026-43026 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent ctnetlink_alloc_expect() allocates expectations from a non-zeroing slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not present in the netlink message, saved_addr and saved_proto are never initialized. Stale data from a previous slab occupant can then be dumped to userspace by ctnetlink_exp_dump_expect(), which checks these fields to decide whether to emit CTA_EXPECT_NAT. The safe sibling nf_ct_expect_init(), used by the packet path, explicitly zeroes these fields. Zero saved_addr, saved_proto and dir in the else branch, guarded by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when NAT is enabled. Confirmed by priming the expect slab with NAT-bearing expectations, freeing them, creating a new expectation without CTA_EXPECT_NAT, and observing that the ctnetlink dump emits a spurious CTA_EXPECT_NAT containing stale data from the prior allocation. | ||||
| CVE-2026-43024 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject immediate NF_QUEUE verdict nft_queue is always used from userspace nftables to deliver the NF_QUEUE verdict. Immediately emitting an NF_QUEUE verdict is never used by the userspace nft tools, so reject immediate NF_QUEUE verdicts. The arp family does not provide queue support, but such an immediate verdict is still reachable. Globally reject NF_QUEUE immediate verdicts to address this issue. | ||||
| CVE-2026-31763 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Fix incorrect free_irq() variable The handler for the IRQ part of this driver is mpu3050->trig but, in the teardown free_irq() is called with handler mpu3050. Use correct IRQ handler when calling free_irq(). | ||||
| CVE-2026-43126 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mixer: oss: Add card disconnect checkpoints ALSA OSS mixer layer calls the kcontrol ops rather individually, and pending calls might be not always caught at disconnecting the device. For avoiding the potential UAF scenarios, add sanity checks of the card disconnection at each entry point of OSS mixer accesses. The rwsem is taken just before that check, hence the rest context should be covered by that properly. | ||||
| CVE-2026-43114 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry New test case fails unexpectedly when avx2 matching functions are used. The test first loads a ranomly generated pipapo set with 'ipv4 . port' key, i.e. nft -f foo. This works. Then, it reloads the set after a flush: (echo flush set t s; cat foo) | nft -f - This is expected to work, because its the same set after all and it was already loaded once. But with avx2, this fails: nft reports a clashing element. The reported clash is of following form: We successfully re-inserted a . b c . d Then we try to insert a . d avx2 finds the already existing a . d, which (due to 'flush set') is marked as invalid in the new generation. It skips the element and moves to next. Due to incorrect masking, the skip-step finds the next matching element *only considering the first field*, i.e. we return the already reinserted "a . b", even though the last field is different and the entry should not have been matched. No such error is reported for the generic c implementation (no avx2) or when the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback. Bisection points to 7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection") but that fix merely uncovers this bug. Before this commit, the wrong element is returned, but erronously reported as a full, identical duplicate. The root-cause is too early return in the avx2 match functions. When we process the last field, we should continue to process data until the entire input size has been consumed to make sure no stale bits remain in the map. | ||||
| CVE-2026-43129 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ima: verify the previous kernel's IMA buffer lies in addressable RAM Patch series "Address page fault in ima_restore_measurement_list()", v3. When the second-stage kernel is booted via kexec with a limiting command line such as "mem=<size>" we observe a pafe fault that happens. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) not-present page This happens on x86_64 only, as this is already fixed in aarch64 in commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer against memory bounds") This patch (of 3): When the second-stage kernel is booted with a limiting command line (e.g. "mem=<size>"), the IMA measurement buffer handed over from the previous kernel may fall outside the addressable RAM of the new kernel. Accessing such a buffer can fault during early restore. Introduce a small generic helper, ima_validate_range(), which verifies that a physical [start, end] range for the previous-kernel IMA buffer lies within addressable memory: - On x86, use pfn_range_is_mapped(). - On OF based architectures, use page_is_ram(). | ||||
| CVE-2026-43130 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected") relies on pci_dev_is_disconnected() to skip ATS invalidation for safely-removed devices, but it does not cover link-down caused by faults, which can still hard-lock the system. For example, if a VM fails to connect to the PCIe device, "virsh destroy" is executed to release resources and isolate the fault, but a hard-lockup occurs while releasing the group fd. Call Trace: qi_submit_sync qi_flush_dev_iotlb intel_pasid_tear_down_entry device_block_translation blocking_domain_attach_dev __iommu_attach_device __iommu_device_set_domain __iommu_group_set_domain_internal iommu_detach_group vfio_iommu_type1_detach_group vfio_group_detach_container vfio_group_fops_release __fput Although pci_device_is_present() is slower than pci_dev_is_disconnected(), it still takes only ~70 µs on a ConnectX-5 (8 GT/s, x2) and becomes even faster as PCIe speed and width increase. Besides, devtlb_invalidation_with_pasid() is called only in the paths below, which are far less frequent than memory map/unmap. 1. mm-struct release 2. {attach,release}_dev 3. set/remove PASID 4. dirty-tracking setup The gain in system stability far outweighs the negligible cost of using pci_device_is_present() instead of pci_dev_is_disconnected() to decide when to skip ATS invalidation, especially under GDR high-load conditions. | ||||
| CVE-2026-43118 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix zero size inode with non-zero size after log replay When logging that an inode exists, as part of logging a new name or logging new dir entries for a directory, we always set the generation of the logged inode item to 0. This is to signal during log replay (in overwrite_item()), that we should not set the i_size since we only logged that an inode exists, so the i_size of the inode in the subvolume tree must be preserved (as when we log new names or that an inode exists, we don't log extents). This works fine except when we have already logged an inode in full mode or it's the first time we are logging an inode created in a past transaction, that inode has a new i_size of 0 and then we log a new name for the inode (due to a new hardlink or a rename), in which case we log an i_size of 0 for the inode and a generation of 0, which causes the log replay code to not update the inode's i_size to 0 (in overwrite_item()). An example scenario: mkdir /mnt/dir xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo sync xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo ln /mnt/dir/foo /mnt/dir/bar xfs_io -c "fsync" /mnt/dir <power fail> After log replay the file remains with a size of 64K. This is because when we first log the inode, when we fsync file foo, we log its current i_size of 0, and then when we create a hard link we log again the inode in exists mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we add to the log tree, so during log replay overwrite_item() sees that the generation is 0 and i_size is 0 so we skip updating the inode's i_size from 64K to 0. Fix this by making sure at fill_inode_item() we always log the real generation of the inode if it was logged in the current transaction with the i_size we logged before. Also if an inode created in a previous transaction is logged in exists mode only, make sure we log the i_size stored in the inode item located from the commit root, so that if we log multiple times that the inode exists we get the correct i_size. A test case for fstests will follow soon. | ||||
| CVE-2026-43133 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB. | ||||
| CVE-2026-43022 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hci_cmd_sync_queue_once() return -EEXIST if exists hci_cmd_sync_queue_once() needs to indicate whether a queue item was added, so caller can know if callbacks are called, so it can avoid leaking resources. Change the function to return -EEXIST if queue item already exists. Modify all callsites to handle that. | ||||
| CVE-2026-43017 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate mesh send advertising payload length mesh_send() currently bounds MGMT_OP_MESH_SEND by total command length, but it never verifies that the bytes supplied for the flexible adv_data[] array actually match the embedded adv_data_len field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a truncated command can still pass the existing 20..50 byte range check and later drive the async mesh send path past the end of the queued command buffer. Keep rejecting zero-length and oversized advertising payloads, but validate adv_data_len explicitly and require the command length to exactly match the flexible array size before queueing the request. | ||||
| CVE-2026-31737 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ftgmac100: fix ring allocation unwind on open failure ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and rx_scratch in stages. On intermediate failures it returned -ENOMEM directly, leaking resources allocated earlier in the function. Rework the failure path to use staged local unwind labels and free allocated resources in reverse order before returning -ENOMEM. This matches common netdev allocation cleanup style. | ||||
| CVE-2025-59851 | 2 Hcl, Hcltech | 2 Dfxanalytics, Dfxanalytics | 2026-05-07 | 3.7 Low |
| HCL DFXAnalytics is affected by a Using Components with Known Vulnerabilities flaw where the application utilizes unpatched libraries or sub-components, which could allow an attacker to identify and exploit publicly known security vulnerabilities to gain unauthorized access or compromise the application. | ||||
| CVE-2026-28201 | 2 Lfnovo, Open Notebook | 2 Open-notebook, Open Notebook | 2026-05-07 | 7.8 High |
| An improper input validation, together with an overly permissive default CORS configuration in Open Notebook v1.8.1 allows remote attacker to trick a legitimate user to alter or delete arbitrary database entries via specially crafted malicious URL. Depending on the deployment, data exfiltration is also possible. | ||||
| CVE-2026-33587 | 2 Lfnovo, Open Notebook | 2 Open-notebook, Open Notebook | 2026-05-07 | 10.0 Critical |
| Lack of user input sanitisation in Open Notebook v1.8.3 allows the application user to execute Python code (and subsequently OS commands) on the docker container via Server-Side Template Injection (SSTI) for user-created transformations. | ||||
| CVE-2026-33588 | 2 Lfnovo, Open Notebook | 2 Open-notebook, Open Notebook | 2026-05-07 | 8.1 High |
| Lack of user input validation in the file upload functionality of Open Notebook v1.8.3 allows the application user to create or modify files on the docker container via path traversal. | ||||
| CVE-2026-33589 | 2 Lfnovo, Open Notebook | 2 Open-notebook, Open Notebook | 2026-05-07 | 6.5 Medium |
| Lack of user input validation in the file upload functionality of Open Notebook v1.8.3 allows the application user to access local files content from the docker container via path traversal. | ||||
| CVE-2026-43052 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check tdls flag in ieee80211_tdls_oper When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the station exists but not whether it is actually a TDLS station. This allows the operation to proceed for non-TDLS stations, causing unintended side effects like modifying channel context and HT protection before failing. Add a check for sta->sta.tdls early in the ENABLE_LINK case, before any side effects occur, to ensure the operation is only allowed for actual TDLS peers. | ||||