Export limit exceeded: 361534 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 361534 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (361534 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53254 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: validate skb length in MCC handlers The RFCOMM MCC handlers cast skb->data to protocol-specific structs without validating skb->len first. A malicious remote device can send truncated MCC frames and trigger out-of-bounds reads in these handlers. Fix this by using skb_pull_data() to validate and access the required data before dereferencing it. rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows 1-byte RPN requests. Handle this by validating only the DLCI byte first, and validating the full struct only when len > 1. | ||||
| CVE-2026-53253 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: reject short frames before parsing A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the packet type byte immediately and, for control packets, reads the control opcode and setup UUID-size byte before proving that those bytes are present. bnep_rx_control() also dereferences the control opcode without rejecting an empty control payload. Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL return gates each dereference. Split the control handler so the frame path can pass an opcode that has already been pulled, and keep the byte-buffer wrapper for extension control payloads. For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the setup payload. struct bnep_setup_conn_req carries destination and source service UUIDs after that byte, each uuid_size bytes, so the parser now documents that tuple explicitly instead of leaving the pull length as an opaque multiplication. Validation reproduced this kernel report: KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790 The buggy address belongs to the object at ffff88800c0f7908 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes to the right of allocated 1-byte region [ffff88800c0f7908, ffff88800c0f7909) Read of size 1 Call trace: dump_stack_lvl+0xb3/0x140 (?:?) print_address_description+0x57/0x3a0 (?:?) bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306) print_report+0xb9/0x2b0 (?:?) __virt_addr_valid+0x1ba/0x3a0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) kasan_addr_to_slab+0x21/0x60 (?:?) kasan_report+0xe0/0x110 (?:?) process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200) worker_thread+0x65c/0xe40 (?:?) __kthread_parkme+0x184/0x230 (?:?) kthread+0x35e/0x470 (?:?) _raw_spin_unlock_irq+0x28/0x50 (?:?) ret_from_fork+0x586/0x870 (?:?) __switch_to+0x74f/0xdc0 (?:?) ret_from_fork_asm+0x1a/0x30 (?:?) | ||||
| CVE-2026-53250 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata() The TX metadata area resides in the UMEM buffer which is memory-mapped and concurrently writable by userspace. In xsk_skb_metadata(), csum_start and csum_offset are read from shared memory for bounds validation, then read again for skb assignment. A malicious userspace application can race to overwrite these values between the two reads, bypassing the bounds check and causing out-of-bounds memory access during checksum computation in the transmit path. Fix this by reading csum_start and csum_offset into local variables once, then using the local copies for both validation and assignment. Note that other metadata fields (flags, launch_time) and the cached csum fields may be mutually inconsistent due to concurrent userspace writes, but this is benign: the only security-critical invariant is that each field's validated value is the same one used, which local caching guarantees. | ||||
| CVE-2026-53248 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix use-after-free in metadata dst teardown airoha_metadata_dst_free() runs metadata_dst_free() which frees the metadata_dst with kfree() immediately, bypassing the RCU grace period. In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from the skb to the metadata_dst. This function requires RCU read-side protection and the dst must remain valid until all RCU readers complete. Since metadata_dst_free() calls kfree() directly, an use-after-free can occur if any skb still holds a noref pointer to the dst when the driver tears it down. Replace metadata_dst_free() with dst_release() which properly goes through the refcount path: when the refcount drops to zero, it schedules the actual free via call_rcu_hurry(), ensuring all RCU readers have completed before the memory is freed. | ||||
| CVE-2026-53247 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown mtk_free_dev() calls metadata_dst_free() which frees the metadata_dst with kfree() immediately, bypassing the RCU grace period. In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from the skb to the metadata_dst. This function requires RCU read-side protection and the dst must remain valid until all RCU readers complete. Since metadata_dst_free() calls kfree() directly, a use-after-free can occur if any skb still holds a noref pointer to the dst when the driver tears it down. Replace metadata_dst_free() with dst_release() which properly goes through the refcount path: when the refcount drops to zero, it schedules the actual free via call_rcu_hurry(), ensuring all RCU readers have completed before the memory is freed. | ||||
| CVE-2026-53246 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing When a listening SCTP server processes a COOKIE_ECHO chunk, the cached peer INIT chunk embedded after the cookie is parsed and its parameters are later walked by sctp_process_init() using sctp_walk_params(). However, the chunk header length of this cached INIT chunk was not validated against the remaining buffer in the COOKIE_ECHO payload. If the length field is inflated, the parameter walk can run beyond the actual received data, leading to out-of-bounds reads and potential memory corruption during later parameter handling (e.g. STATE_COOKIE processing and kmemdup() copies). Add a bounds check in sctp_unpack_cookie() to ensure the cached INIT chunk length does not exceed the available data in the COOKIE_ECHO buffer before it is used. | ||||
| CVE-2026-53244 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: VFS: fix possible failure to unlock in nfsd4_create_file() atomic_create() in fs/namei.c drops the reference to the dentry when it returns an error. This behaviour was imported into dentry_create() so that it will drop the reference if an error is returned from atomic_create(), though not if vfs_create() returns an error (in the case where ->atomic_create is not supported). The caller - nfsd4_create_file() - is made aware of this by checking path->dentry, which will either be a counted reference to a dentry, or an error pointer. However the change to use start_creating()/end_creating() (which landed shortly before the dentry_create() change landed, though was likely developed around the same time) means that nfsd4_create_file() *needs* a valid dentry so that it can unlock the parent. The net result is that if NFSD exports a filesystem which uses ->atomic_create, and if a call to ->atomic_create returns an error, then nfsd4_create_file() will pass an error pointer to end_creating() and the parent will not be unlocked. Fix this by changing dentry_create() to make sure path->dentry is always a valid dentry, never an error-pointer. The actual error is already returned a different way. Note that if ->atomic_create() returns a different dentry (which may not be possible in practice) we are guaranteed (because it is only ever provided by d_spliace_alias()) that it will have the same d_parent and so it will have the same effect when passed to end_creating(). | ||||
| CVE-2026-53242 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streams snd_pcm_drain() uses init_waitqueue_entry which does not clear entry.prev/next, and add_wait_queue with a conditional remove_wait_queue that is skipped when to_check is no longer in the group after concurrent UNLINK. The orphaned wait entry remains on the unlinked substream sleep queue. On the next drain iteration, add_wait_queue adds the entry to a new queue while still linked on the old one, corrupting both lists. A subsequent wake_up dereferences NULL at the func pointer (mapped from the spinlock at offset 0 of the misinterpreted wait_queue_head_t), causing a kernel panic. Replace init_waitqueue_entry/add_wait_queue/conditional remove_wait_queue with init_wait_entry/prepare_to_wait/ finish_wait. init_wait_entry clears prev/next via INIT_LIST_HEAD on each iteration and sets autoremove_wake_function which auto-removes the entry on wake-up. finish_wait safely handles both the already-removed and still-queued cases. | ||||
| CVE-2026-53240 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload __input_process_payload() stores first_skb into xtfs->ra_newskb under drop_lock when starting partial reassembly, then unlocks and breaks out of the processing loop. The post-loop check reads xtfs->ra_newskb without the lock to decide whether first_skb is still owned: if (first_skb && first_iplen && !defer && first_skb != xtfs->ra_newskb) Between spin_unlock and this read, a concurrent CPU running iptfs_reassem_cont() (or the drop_timer hrtimer) can complete reassembly, NULL xtfs->ra_newskb, and free the skb. The check then evaluates first_skb != NULL as true, and pskb_trim/ip_summed/consume_skb operate on the freed skb — a use-after-free in skbuff_head_cache. Replace the unlocked read with a local bool that records whether first_skb was handed to the reassembly state in the current call. The flag is set after the existing spin_unlock, before the break, using the pointer equality that is stable at that point (first_skb == skb iff first_skb was stored in ra_newskb). | ||||
| CVE-2026-53239 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx() Fix the race by pruning the bin while still holding xfrm_policy_lock, before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since the lock is already held. The wrapper xfrm_policy_inexact_prune_bin() becomes unused and is removed. Race: CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO) ========================== ========================== xfrm_policy_bysel_ctx(): spin_lock_bh(xfrm_policy_lock) bin = xfrm_policy_inexact_lookup() __xfrm_policy_unlink(pol) spin_unlock_bh(xfrm_policy_lock) xfrm_policy_kill(ret) // wide window, lock not held xfrm_hash_rebuild(): spin_lock_bh(xfrm_policy_lock) __xfrm_policy_inexact_flush(): kfree_rcu(bin) // bin freed spin_unlock_bh(xfrm_policy_lock) xfrm_policy_inexact_prune_bin(bin) // UAF: bin is freed | ||||
| CVE-2026-53235 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: add pskb_may_pull() to skb_gro_receive_list() skb_gro_receive_list() calls skb_pull(skb, skb_gro_offset(skb)) without first ensuring the data is in the linear area via pskb_may_pull(). When the skb arrives via napi_gro_frags(), skb_headlen can be 0 (all data in page fragments) while skb_gro_offset is non-zero (after IP+TCP header parsing). The skb_pull() then decrements skb->len by skb_gro_offset but skb->data_len stays unchanged, hitting BUG_ON(skb->len < skb->data_len) in __skb_pull(). The UDP fraglist GRO path already contains this guard at udp_offload.c:749. Adding it to skb_gro_receive_list() itself provides centralized protection for all callers (TCP, UDP, and any future protocols), and ensures the precondition of skb_pull() is satisfied before it is called. On pskb_may_pull() failure, set NAPI_GRO_CB(skb)->flush = 1 so the skb is not held as a new GRO head and is instead delivered through the normal receive path, matching the UDP handling. | ||||
| CVE-2026-53232 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: clean the sfp upstream if phy probing fails Sashiko reported that we don't call sfp_bus_del_upstream() in the probe failure path, so let's add it, otherwise the sfp-bus is left with a dangling 'upstream' field, that may be used later on during SFP events. This issue existed before the generic phylib sfp support, back when drivers were calling phy_sfp_probe themselves. | ||||
| CVE-2026-53230 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.7 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using the PF's log_max_current_uc/mc_list capabilities. When querying a VF vport with a larger configured max (via devlink), the firmware response can overflow this buffer: BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385 CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_report+0x176/0x4e4 kasan_report+0xc8/0x100 mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core] esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core] esw_vport_change_handler+0x6a/0x90 [mlx5_core] process_one_work+0x87f/0x15e0 worker_thread+0x62b/0x1020 kthread+0x375/0x490 ret_from_fork+0x4dc/0x810 ret_from_fork_asm+0x11/0x20 </TASK> Fix by querying the vport's own HCA caps to size the buffer correctly. Refactor the function to allocate and return the MAC list internally, removing the caller's dependency on knowing the correct max. | ||||
| CVE-2026-53229 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame() returns false (e.g. XDPSQ is full), the function returns without unmapping the DMA address or freeing the xdp_frame allocated by xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on success, so the completion path cannot recover these entries. With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind: DMA-API: pci 0000:08:00.0: device driver has pending DMA allocations while released from device [count=1116] One of leaked entries details: [device address=0x000000010ffd7028] [size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy] WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180 ... DMA-API: Mapped at: debug_dma_map_phys+0x4b/0xd0 dma_map_phys+0xfd/0x2d0 mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core] mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core] mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core] Add the missing unmap + xdp_return_frame, matching the cleanup already done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch, so no per-frag unmap is needed. | ||||
| CVE-2026-53228 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: sit: reload inner IPv6 header after GSO offloads ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function entry and continues using it after iptunnel_handle_offloads(). For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone(). When the skb header is cloned, skb_header_unclone() can call pskb_expand_head(), which may move the skb head. The pskb_expand_head() contract requires pointers into the skb header to be reloaded after the call. If the later skb_realloc_headroom() branch is not taken, SIT uses the stale iph6 pointer to read the inner hop limit and DS field. That can read from a freed skb head after the old head's remaining clone is released. Reload iph6 after the offload helper succeeds and before subsequent reads from the inner IPv6 header. Keep the existing reload after skb_realloc_headroom(), since that branch can also replace the skb. | ||||
| CVE-2026-53225 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix uninit-value in __sctp_rcv_asconf_lookup() __sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF chunk can hold the ADDIP header and a parameter header, then calls af->from_addr_param(), which reads the full address (16 bytes for IPv6) trusting the parameter's declared length. An unauthenticated peer can send a truncated trailing ASCONF chunk that declares an IPv6 address parameter but stops after the 4-byte parameter header; reached from the no-association lookup path, from_addr_param() then reads uninitialized bytes past the parameter. Impact: an unauthenticated SCTP peer makes the receive path read up to 16 bytes of uninitialized memory past a truncated ASCONF address parameter. The sibling __sctp_rcv_init_lookup() bounds parameters with sctp_walk_params(); this path open-codes the fetch and omits the bound. Verify the whole address parameter lies within the chunk before from_addr_param() reads it, the same class of fix as commit 51e5ad549c43 ("net: sctp: fix KMSAN uninit-value in sctp_inq_pop"). | ||||
| CVE-2026-53224 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate embedded INIT chunk and address list lengths in cookie sctp_unpack_cookie() only checked that the embedded INIT chunk length did not exceed the remaining cookie payload, but did not ensure that the INIT chunk is large enough to contain a complete INIT header. A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose length field is smaller than sizeof(struct sctp_init_chunk). Later, sctp_process_init() accesses INIT parameters unconditionally, which may lead to out-of-bounds reads. In addition, raw_addr_list_len is not fully validated against the remaining cookie payload. When cookie authentication is disabled, an attacker can supply an oversized raw_addr_list_len and cause sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The address parser also lacks sufficient bounds checks for parameter headers and lengths, allowing malformed address parameters to trigger out-of-bounds reads. Fix this by: - requiring the embedded INIT chunk length to be at least sizeof(struct sctp_init_chunk); - validating that the INIT chunk and raw address list together fit within the cookie payload; - verifying sufficient data exists for each address parameter header and payload before parsing it. Note that sctp_verify_init() must be called after sctp_unpack_cookie() and before sctp_process_init() when cookie authentication is disabled. This will be addressed in a separate patch. | ||||
| CVE-2026-53223 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: guard timestamp cmsgs to real error queue skbs skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb from sk_error_queue. That assumption is not true for AF_PACKET sockets: outgoing packet taps are also delivered to packet sockets with skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET instead of struct sock_exterr_skb. If such an skb is received with timestamping enabled, the generic timestamp cmsg path can read AF_PACKET control-buffer state as sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop counter overlaps opt_stats. An odd drop count makes the path emit SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear skbs this copies past the linear head and can trigger hardened usercopy or disclose adjacent heap contents. Keep skb_is_err_queue() local to net/socket.c, but make it verify that the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal receive ownership and no longer pass as error-queue skbs, while legitimate sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free ownership. | ||||
| CVE-2026-53221 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup() In vti6_tnl_lookup(), when an exact match for a tunnel fails, the code falls back to searching for wildcard tunnels: - Tunnels matching the packet's local address, with any remote address wildcard remote). - Tunnels matching the packet's remote address, with any local address (wildcard local). However, vti6 stores all these different types of tunnels in the same hash table (ip6n->tnls_r_l) prone to hash collisions. The bug is that the fallback search loops in vti6_tnl_lookup() were missing checks to ensure that the candidate tunnel actually has a wildcard address. | ||||
| CVE-2026-53217 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.6 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: sync RX data at the hardware packet offset mvpp2 programs the RX queue packet offset, so hardware writes received data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the unused headroom and misses the same number of bytes at the packet tail. On non-coherent DMA systems this can leave the CPU reading stale cache contents for the end of the received frame. Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range offset so the sync covers the Marvell header and packet data actually written by hardware. | ||||