Export limit exceeded: 351172 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (351172 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43364 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ublk: fix NULL pointer dereference in ublk_ctrl_set_size() ublk_ctrl_set_size() unconditionally dereferences ub->ub_disk via set_capacity_and_notify() without checking if it is NULL. ub->ub_disk is NULL before UBLK_CMD_START_DEV completes (it is only assigned in ublk_ctrl_start_dev()) and after UBLK_CMD_STOP_DEV runs (ublk_detach_disk() sets it to NULL). Since the UBLK_CMD_UPDATE_SIZE handler performs no state validation, a user can trigger a NULL pointer dereference by sending UPDATE_SIZE to a device that has been added but not yet started, or one that has been stopped. Fix this by checking ub->ub_disk under ub->mutex before dereferencing it, and returning -ENODEV if the disk is not available. | ||||
| CVE-2026-43363 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/apic: Disable x2apic on resume if the kernel expects so When resuming from s2ram, firmware may re-enable x2apic mode, which may have been disabled by the kernel during boot either because it doesn't support IRQ remapping or for other reasons. This causes the kernel to continue using the xapic interface, while the hardware is in x2apic mode, which causes hangs. This happens on defconfig + bare metal + s2ram. Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be disabled, i.e. when x2apic_mode = 0. The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the pre-sleep configuration or initial boot configuration for each CPU, including MSR state: When executing from the power-on reset vector as a result of waking from an S2 or S3 sleep state, the platform firmware performs only the hardware initialization required to restore the system to either the state the platform was in prior to the initial operating system boot, or to the pre-sleep configuration state. In multiprocessor systems, non-boot processors should be placed in the same state as prior to the initial operating system boot. (further ahead) If this is an S2 or S3 wake, then the platform runtime firmware restores minimum context of the system before jumping to the waking vector. This includes: CPU configuration. Platform runtime firmware restores the pre-sleep configuration or initial boot configuration of each CPU (MSR, MTRR, firmware update, SMBase, and so on). Interrupts must be disabled (for IA-32 processors, disabled by CLI instruction). (and other things) So at least as per the spec, re-enablement of x2apic by the firmware is allowed if "x2apic on" is a part of the initial boot configuration. [1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization [ bp: Massage. ] | ||||
| CVE-2026-43362 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix in-place encryption corruption in SMB2_write() SMB2_write() places write payload in iov[1..n] as part of rq_iov. smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message() encrypts iov[1] in-place, replacing the original plaintext with ciphertext. On a replayable error, the retry sends the same iov[1] which now contains ciphertext instead of the original data, resulting in corruption. The corruption is most likely to be observed when connections are unstable, as reconnects trigger write retries that re-send the already-encrypted data. This affects SFU mknod, MF symlinks, etc. On kernels before 6.10 (prior to the netfs conversion), sync writes also used this path and were similarly affected. The async write path wasn't unaffected as it uses rq_iter which gets deep-copied. Fix by moving the write payload into rq_iter via iov_iter_kvec(), so smb3_init_transform_rq() deep-copies it before encryption. | ||||
| CVE-2026-41258 | 2026-05-15 | 9.1 Critical | ||
| OpenMRS is an open source electronic medical record system platform. From 2.7.0 to before 2.7.9 and 2.8.6, the ConceptReferenceRangeUtility.evaluateCriteria() method in OpenMRS Core evaluates database-stored criteria strings as Apache Velocity templates without any sandbox configuration. The VelocityEngine is initialized with only logging properties and noSecureUberspector, leaving the default UberspectImpl in place, which allows unrestricted Java reflection through template expressions. A user with the Manage Concepts privilege can store a malicious Velocity template expression in a concept's reference range criteria field. This payload is then executed automatically whenever a user or API call validates an observation against the affected concept. The Velocity context exposes $patient (the Person / Patient object), $obs (the Obs object), and $fn (the ConceptReferenceRangeUtility instance with access to the full OpenMRS service layer). This vulnerability is fixed in 2.7.9 and 2.8.6. | ||||
| CVE-2025-66660 | 1 Amd | 12 Instinct Mi210, Instinct Mi250, Instinct Mi300a and 9 more | 2026-05-15 | N/A |
| Insufficient parameter sanitization in TEE SOC Driver could allow an attacker to issue a malformed DRV_SOC_CMD_ID_SRIOV_CHECK_TA_COMPAT to cause incorrect shared memory mapping, potentially resulting in unexpected behavior. | ||||
| CVE-2026-44484 | 1 Lightningai | 1 Pytorch Lightning | 2026-05-15 | 9.8 Critical |
| PyTorch Lightning is a deep learning framework to pretrain and finetune AI models. Versions 2.6.2 and 2.6.2 have introduced functionality consistent with a credential harvesting mechanism. | ||||
| CVE-2026-44699 | 2026-05-15 | N/A | ||
| LibJWT is a C JSON Web Token Library. From 3.0.0 to 3.3.2, libjwt accepts an RSA JWK that does not contain an alg parameter as the verification key for an HS256/HS384/HS512 token. In the OpenSSL backend, this causes HMAC verification to run with a zero-length key, so an attacker can forge a valid JWT without knowing any secret or RSA private key. This is an algorithm-confusion authentication bypass. It affects applications that load RSA keys from JWKS where alg is omitted, which is valid JWK syntax and common in real deployments, and then choose the verification algorithm from the JWT header, for example in a kid lookup callback. This vulnerability is fixed in 3.3.3. | ||||
| CVE-2026-44195 | 1 Opnsense | 2 Core, Opnsense | 2026-05-15 | 5.3 Medium |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to 26.1.7, a logic flaw in the OPNsense lockout_handler allows an unauthenticated attacker to continuously reset the authentication failure counter for their IP address. By interjecting a crafted username containing a success keyword ("Accepted" or "Successful login") between normal brute-force attempts, an attacker can prevent the failure counter from ever reaching the lockout threshold. This vulnerability is fixed in 26.1.7. | ||||
| CVE-2026-43358 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: add missing RCU unlock in error path in try_release_subpage_extent_buffer() Call rcu_read_lock() before exiting the loop in try_release_subpage_extent_buffer() because there is a rcu_read_unlock() call past the loop. This has been detected by the Clang thread-safety analyzer. | ||||
| CVE-2026-46383 | 2026-05-15 | 5.5 Medium | ||
| Microsoft APM is an open-source, community-driven dependency manager for AI agents. Prior to 0.13.0, Microsoft APM contains a Windows-specific archive extraction boundary failure in the legacy-bundle probe used by apm install <bundle> on supported Python 3.10 and 3.11 runtimes. When apm install is given a local .tar.gz that is not recognized as a plugin-format bundle, APM probes whether it is a legacy --format apm bundle. On Python versions earlier than 3.12, that probe extracts untrusted tar members with raw tar.extractall() without rejecting Windows absolute member names such as D:/.... This vulnerability is fixed in 0.13.0. | ||||
| CVE-2026-43357 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050-core: fix pm_runtime error handling The return value of pm_runtime_get_sync() is not checked, allowing the driver to access hardware that may fail to resume. The device usage count is also unconditionally incremented. Use pm_runtime_resume_and_get() which propagates errors and avoids incrementing the usage count on failure. In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate() failure since postdisable does not run when preenable fails. | ||||
| CVE-2026-43356 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis: Fix NULL pointer dereference in adis_init The adis_init() function dereferences adis->ops to check if the individual function pointers (write, read, reset) are NULL, but does not first check if adis->ops itself is NULL. Drivers like adis16480, adis16490, adis16545 and others do not set custom ops and rely on adis_init() assigning the defaults. Since struct adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL when adis_init() is called, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : adis_init+0xc0/0x118 Call trace: adis_init+0xc0/0x118 adis16480_probe+0xe0/0x670 Fix this by checking if adis->ops is NULL before dereferencing it, falling through to assign the default ops in that case. | ||||
| CVE-2026-45539 | 2026-05-15 | 7.4 High | ||
| Microsoft APM is an open-source, community-driven dependency manager for AI agents. From 0.5.4 to 0.12.4, two primitive integrators in apm-cli enumerate package files with bare Path.glob() / Path.rglob() calls and read each match with Path.read_text(), transparently following symbolic links. A symlink committed inside a remote APM dependency under .apm/prompts/<x>.prompt.md or .apm/agents/<x>.agent.md is preserved verbatim into apm_modules/ on clone and then dereferenced during integration, with the resolved content written as a regular file into the project's deploy directories. The package content_hash, the pre-deploy SecurityGate scan, and apm audit do not flag this. The deploy roots are not added to the auto-generated .gitignore, so the resulting files are staged by git add by default. This vulnerability is fixed in 0.13.0. | ||||
| CVE-2026-42596 | 1 Gotenberg | 1 Gotenberg | 2026-05-15 | 9.4 Critical |
| Gotenberg is a Docker-powered stateless API for PDF files. Prior to 8.31.0, the default deny-lists used by Gotenberg's downloadFrom feature and webhook feature are bypassable. Because the filter is regex-based and case-sensitive, an unauthenticated attacker can supply URLs such as http://[::ffff:127.0.0.1]:... and reach loopback or private HTTP services that the default deny-list is intended to block. This crosses a real security boundary because an external caller can force the server to make outbound requests to internal-only targets. This vulnerability is fixed in 8.31.0. | ||||
| CVE-2026-43355 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1780: fix PM runtime leak on error path Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails. | ||||
| CVE-2026-44641 | 2026-05-15 | 7.1 High | ||
| Microsoft APM is an open-source, community-driven dependency manager for AI agents. Prior to 0.8.12, Microsoft APM normalizes marketplace plugins by copying plugin components referenced in plugin.json into .apm/. The manifest fields agents, skills, commands, and hooks are attacker-controlled, but the implementation does not enforce that those paths remain inside the plugin directory. A malicious plugin can therefore use absolute paths or ../ traversal paths to copy arbitrary readable host files or directories from the installer's machine during apm install. This vulnerability is fixed in 0.8.12. | ||||
| CVE-2026-31218 | 2026-05-15 | 8.8 High | ||
| The _load_model() function in the neural_magic_training.py script of the optimate project in commit a6d302f912b481c94370811af6b11402f51d377f (2024-07-21) is vulnerable to insecure deserialization (CWE-502). When loading a model state dictionary from a state_dict.pt file via torch.load(), the function does not enable the weights_only=True security parameter. This allows the deserialization of arbitrary Python objects through the Pickle module. A remote attacker can exploit this by providing a maliciously crafted state_dict.pt file within a directory specified via the --model argument, leading to arbitrary code execution during the deserialization process on the victim's system. | ||||
| CVE-2026-31219 | 2026-05-15 | 8.8 High | ||
| The _load_model() function in the neural_magic_training.py script of the optimate project in commit a6d302f912b481c94370811af6b11402f51d377f (2024-07-21) is vulnerable to insecure deserialization (CWE-502). When a user provides a single model file path (e.g., .pt or .pth) via the --model command-line argument, the function loads the file using torch.load() without enabling the weights_only=True security parameter. This allows the deserialization of arbitrary Python objects through the Pickle module. A remote attacker can exploit this by providing a maliciously crafted model file, leading to arbitrary code execution during deserialization on the victim's system. | ||||
| CVE-2026-24711 | 2026-05-15 | 5.3 Medium | ||
| Northern.tech CFEngine Enterprise before 3.21.8, 3.24.3, and 3.27.0 has Incorrect Access Control. | ||||
| CVE-2025-69443 | 2026-05-15 | 6.3 Medium | ||
| Remote Code Execution in coleam00 Archon 0.1.0. A crafted HTML page, when accessed by a victim, can execute commands, run prompts on behalf of the user, control the Archon UI features, and steal all Archon information available on the UI including API keys. | ||||