Export limit exceeded: 19636 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (19636 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54185 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: remove BUG_ON()'s in add_new_free_space() At add_new_free_space() we have these BUG_ON()'s that are there to deal with any failure to add free space to the in memory free space cache. Such failures are mostly -ENOMEM that should be very rare. However there's no need to have these BUG_ON()'s, we can just return any error to the caller and all callers and their upper call chain are already dealing with errors. So just make add_new_free_space() return any errors, while removing the BUG_ON()'s, and returning the total amount of added free space to an optional u64 pointer argument. | ||||
| CVE-2023-54186 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: fix pin_assignment_show This patch fixes negative indexing of buf array in pin_assignment_show when get_current_pin_assignments returns 0 i.e. no compatible pin assignments are found. BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c ... Call trace: dump_backtrace+0x110/0x204 dump_stack_lvl+0x84/0xbc print_report+0x358/0x974 kasan_report+0x9c/0xfc __do_kernel_fault+0xd4/0x2d4 do_bad_area+0x48/0x168 do_tag_check_fault+0x24/0x38 do_mem_abort+0x6c/0x14c el1_abort+0x44/0x68 el1h_64_sync_handler+0x64/0xa4 el1h_64_sync+0x78/0x7c pin_assignment_show+0x26c/0x33c dev_attr_show+0x50/0xc0 | ||||
| CVE-2023-53777 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: kill hooked chains to avoid loops on deduplicated compressed images After heavily stressing EROFS with several images which include a hand-crafted image of repeated patterns for more than 46 days, I found two chains could be linked with each other almost simultaneously and form a loop so that the entire loop won't be submitted. As a consequence, the corresponding file pages will remain locked forever. It can be _only_ observed on data-deduplicated compressed images. For example, consider two chains with five pclusters in total: Chain 1: 2->3->4->5 -- The tail pcluster is 5; Chain 2: 5->1->2 -- The tail pcluster is 2. Chain 2 could link to Chain 1 with pcluster 5; and Chain 1 could link to Chain 2 at the same time with pcluster 2. Since hooked chains are all linked locklessly now, I have no idea how to simply avoid the race. Instead, let's avoid hooked chains completely until I could work out a proper way to fix this and end users finally tell us that it's needed to add it back. Actually, this optimization can be found with multi-threaded workloads (especially even more often on deduplicated compressed images), yet I'm not sure about the overall system impacts of not having this compared with implementation complexity. | ||||
| CVE-2023-53778 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Clean up integer overflow checking in map_user_pages() The encode_dma() function has some validation on in_trans->size but it would be more clear to move those checks to find_and_map_user_pages(). The encode_dma() had two checks: if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size) return -EINVAL; The in_trans->addr variable is the starting address. The in_trans->size variable is the total size of the transfer. The transfer can occur in parts and the resources->xferred_dma_size tracks how many bytes we have already transferred. This patch introduces a new variable "remaining" which represents the amount we want to transfer (in_trans->size) minus the amount we have already transferred (resources->xferred_dma_size). I have modified the check for if in_trans->size is zero to instead check if in_trans->size is less than resources->xferred_dma_size. If we have already transferred more bytes than in_trans->size then there are negative bytes remaining which doesn't make sense. If there are zero bytes remaining to be copied, just return success. The check in encode_dma() checked that "addr + size" could not overflow and barring a driver bug that should work, but it's easier to check if we do this in parts. First check that "in_trans->addr + resources->xferred_dma_size" is safe. Then check that "xfer_start_addr + remaining" is safe. My final concern was that we are dealing with u64 values but on 32bit systems the kmalloc() function will truncate the sizes to 32 bits. So I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);" and returned -EINVAL if it were >= SIZE_MAX. This will not affect 64bit systems. | ||||
| CVE-2023-54188 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: apple-admac: Fix 'current_tx' not getting freed In terminate_all we should queue up all submitted descriptors to be freed. We do that for the content of the 'issued' and 'submitted' lists, but the 'current_tx' descriptor falls through the cracks as it's removed from the 'issued' list once it gets assigned to be the current descriptor. Explicitly queue up freeing of the 'current_tx' descriptor to address a memory leak that is otherwise present. | ||||
| CVE-2025-25273 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 7.8 High |
| Insufficient control flow management in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2023-54124 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to drop all dirty pages during umount() if cp_error is set xfstest generic/361 reports a bug as below: f2fs_bug_on(sbi, sbi->fsync_node_num); kernel BUG at fs/f2fs/super.c:1627! RIP: 0010:f2fs_put_super+0x3a8/0x3b0 Call Trace: generic_shutdown_super+0x8c/0x1b0 kill_block_super+0x2b/0x60 kill_f2fs_super+0x87/0x110 deactivate_locked_super+0x39/0x80 deactivate_super+0x46/0x50 cleanup_mnt+0x109/0x170 __cleanup_mnt+0x16/0x20 task_work_run+0x65/0xa0 exit_to_user_mode_prepare+0x175/0x190 syscall_exit_to_user_mode+0x25/0x50 do_syscall_64+0x4c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc During umount(), if cp_error is set, f2fs_wait_on_all_pages() should not stop waiting all F2FS_WB_CP_DATA pages to be writebacked, otherwise, fsync_node_num can be non-zero after f2fs_wait_on_all_pages() causing this bug. In this case, to avoid deadloop in f2fs_wait_on_all_pages(), it needs to drop all dirty pages rather than redirtying them. | ||||
| CVE-2023-54122 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add check for cstate As kzalloc may fail and return NULL pointer, it should be better to check cstate in order to avoid the NULL pointer dereference in __drm_atomic_helper_crtc_reset. Patchwork: https://patchwork.freedesktop.org/patch/514163/ | ||||
| CVE-2023-54190 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: leds: led-core: Fix refcount leak in of_led_get() class_find_device_by_of_node() calls class_find_device(), it will take the reference, use the put_device() to drop the reference when not need anymore. | ||||
| CVE-2025-21086 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 7.5 High |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege. | ||||
| CVE-2023-54121 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix incorrect splitting in btrfs_drop_extent_map_range In production we were seeing a variety of WARN_ON()'s in the extent_map code, specifically in btrfs_drop_extent_map_range() when we have to call add_extent_mapping() for our second split. Consider the following extent map layout PINNED [0 16K) [32K, 48K) and then we call btrfs_drop_extent_map_range for [0, 36K), with skip_pinned == true. The initial loop will have start = 0 end = 36K len = 36K we will find the [0, 16k) extent, but since we are pinned we will skip it, which has this code start = em_end; if (end != (u64)-1) len = start + len - em_end; em_end here is 16K, so now the values are start = 16K len = 16K + 36K - 16K = 36K len should instead be 20K. This is a problem when we find the next extent at [32K, 48K), we need to split this extent to leave [36K, 48k), however the code for the split looks like this split->start = start + len; split->len = em_end - (start + len); In this case we have em_end = 48K split->start = 16K + 36K // this should be 16K + 20K split->len = 48K - (16K + 36K) // this overflows as 16K + 36K is 52K and now we have an invalid extent_map in the tree that potentially overlaps other entries in the extent map. Even in the non-overlapping case we will have split->start set improperly, which will cause problems with any block related calculations. We don't actually need len in this loop, we can simply use end as our end point, and only adjust start up when we find a pinned extent we need to skip. Adjust the logic to do this, which keeps us from inserting an invalid extent map. We only skip_pinned in the relocation case, so this is relatively rare, except in the case where you are running relocation a lot, which can happen with auto relocation on. | ||||
| CVE-2023-53783 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-iocost: fix divide by 0 error in calc_lcoefs() echo max of u64 to cost.model can cause divide by 0 error. # echo 8:0 rbps=18446744073709551615 > /sys/fs/cgroup/io.cost.model divide error: 0000 [#1] PREEMPT SMP RIP: 0010:calc_lcoefs+0x4c/0xc0 Call Trace: <TASK> ioc_refresh_params+0x2b3/0x4f0 ioc_cost_model_write+0x3cb/0x4c0 ? _copy_from_iter+0x6d/0x6c0 ? kernfs_fop_write_iter+0xfc/0x270 cgroup_file_write+0xa0/0x200 kernfs_fop_write_iter+0x17d/0x270 vfs_write+0x414/0x620 ksys_write+0x73/0x160 __x64_sys_write+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd calc_lcoefs() uses the input value of cost.model in DIV_ROUND_UP_ULL, overflow would happen if bps plus IOC_PAGE_SIZE is greater than ULLONG_MAX, it can cause divide by 0 error. Fix the problem by setting basecost | ||||
| CVE-2023-54193 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: remove block_cb from driver_list before freeing Error handler of tcf_block_bind() frees the whole bo->cb_list on error. However, by that time the flow_block_cb instances are already in the driver list because driver ndo_setup_tc() callback is called before that up the call chain in tcf_block_offload_cmd(). This leaves dangling pointers to freed objects in the list and causes use-after-free[0]. Fix it by also removing flow_block_cb instances from driver_list before deallocating them. [0]: [ 279.868433] ================================================================== [ 279.869964] BUG: KASAN: slab-use-after-free in flow_block_cb_setup_simple+0x631/0x7c0 [ 279.871527] Read of size 8 at addr ffff888147e2bf20 by task tc/2963 [ 279.873151] CPU: 6 PID: 2963 Comm: tc Not tainted 6.3.0-rc6+ #4 [ 279.874273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 279.876295] Call Trace: [ 279.876882] <TASK> [ 279.877413] dump_stack_lvl+0x33/0x50 [ 279.878198] print_report+0xc2/0x610 [ 279.878987] ? flow_block_cb_setup_simple+0x631/0x7c0 [ 279.879994] kasan_report+0xae/0xe0 [ 279.880750] ? flow_block_cb_setup_simple+0x631/0x7c0 [ 279.881744] ? mlx5e_tc_reoffload_flows_work+0x240/0x240 [mlx5_core] [ 279.883047] flow_block_cb_setup_simple+0x631/0x7c0 [ 279.884027] tcf_block_offload_cmd.isra.0+0x189/0x2d0 [ 279.885037] ? tcf_block_setup+0x6b0/0x6b0 [ 279.885901] ? mutex_lock+0x7d/0xd0 [ 279.886669] ? __mutex_unlock_slowpath.constprop.0+0x2d0/0x2d0 [ 279.887844] ? ingress_init+0x1c0/0x1c0 [sch_ingress] [ 279.888846] tcf_block_get_ext+0x61c/0x1200 [ 279.889711] ingress_init+0x112/0x1c0 [sch_ingress] [ 279.890682] ? clsact_init+0x2b0/0x2b0 [sch_ingress] [ 279.891701] qdisc_create+0x401/0xea0 [ 279.892485] ? qdisc_tree_reduce_backlog+0x470/0x470 [ 279.893473] tc_modify_qdisc+0x6f7/0x16d0 [ 279.894344] ? tc_get_qdisc+0xac0/0xac0 [ 279.895213] ? mutex_lock+0x7d/0xd0 [ 279.896005] ? __mutex_lock_slowpath+0x10/0x10 [ 279.896910] rtnetlink_rcv_msg+0x5fe/0x9d0 [ 279.897770] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 279.898672] ? __sys_sendmsg+0xb5/0x140 [ 279.899494] ? do_syscall_64+0x3d/0x90 [ 279.900302] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.901337] ? kasan_save_stack+0x2e/0x40 [ 279.902177] ? kasan_save_stack+0x1e/0x40 [ 279.903058] ? kasan_set_track+0x21/0x30 [ 279.903913] ? kasan_save_free_info+0x2a/0x40 [ 279.904836] ? ____kasan_slab_free+0x11a/0x1b0 [ 279.905741] ? kmem_cache_free+0x179/0x400 [ 279.906599] netlink_rcv_skb+0x12c/0x360 [ 279.907450] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 279.908360] ? netlink_ack+0x1550/0x1550 [ 279.909192] ? rhashtable_walk_peek+0x170/0x170 [ 279.910135] ? kmem_cache_alloc_node+0x1af/0x390 [ 279.911086] ? _copy_from_iter+0x3d6/0xc70 [ 279.912031] netlink_unicast+0x553/0x790 [ 279.912864] ? netlink_attachskb+0x6a0/0x6a0 [ 279.913763] ? netlink_recvmsg+0x416/0xb50 [ 279.914627] netlink_sendmsg+0x7a1/0xcb0 [ 279.915473] ? netlink_unicast+0x790/0x790 [ 279.916334] ? iovec_from_user.part.0+0x4d/0x220 [ 279.917293] ? netlink_unicast+0x790/0x790 [ 279.918159] sock_sendmsg+0xc5/0x190 [ 279.918938] ____sys_sendmsg+0x535/0x6b0 [ 279.919813] ? import_iovec+0x7/0x10 [ 279.920601] ? kernel_sendmsg+0x30/0x30 [ 279.921423] ? __copy_msghdr+0x3c0/0x3c0 [ 279.922254] ? import_iovec+0x7/0x10 [ 279.923041] ___sys_sendmsg+0xeb/0x170 [ 279.923854] ? copy_msghdr_from_user+0x110/0x110 [ 279.924797] ? ___sys_recvmsg+0xd9/0x130 [ 279.925630] ? __perf_event_task_sched_in+0x183/0x470 [ 279.926656] ? ___sys_sendmsg+0x170/0x170 [ 279.927529] ? ctx_sched_in+0x530/0x530 [ 279.928369] ? update_curr+0x283/0x4f0 [ 279.929185] ? perf_event_update_userpage+0x570/0x570 [ 279.930201] ? __fget_light+0x57/0x520 [ 279.931023] ? __switch_to+0x53d/0xe70 [ 27 ---truncated--- | ||||
| CVE-2025-8066 | 2 Bunkerity, Linux | 2 Bunker Web, Linux | 2026-04-15 | N/A |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in Bunkerity Bunker Web on Linux allows Phishing.This issue affects Bunker Web: 1.6.2. | ||||
| CVE-2023-53784 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm: bridge: dw_hdmi: fix connector access for scdc Commit 5d844091f237 ("drm/scdc-helper: Pimp SCDC debugs") changed the scdc interface to pick up an i2c adapter from a connector instead. However, in the case of dw-hdmi, the wrong connector was being used to pass i2c adapter information, since dw-hdmi's embedded connector structure is only populated when the bridge attachment callback explicitly asks for it. drm-meson is handling connector creation, so this won't happen, leading to a NULL pointer dereference. Fix it by having scdc functions access dw-hdmi's current connector pointer instead, which is assigned during the bridge enablement stage. [narmstrong: moved Fixes tag before first S-o-b and added Reported-by tag] | ||||
| CVE-2023-53786 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm flakey: fix a crash with invalid table line This command will crash with NULL pointer dereference: dmsetup create flakey --table \ "0 `blockdev --getsize /dev/ram0` flakey /dev/ram0 0 0 1 2 corrupt_bio_byte 512" Fix the crash by checking if arg_name is non-NULL before comparing it. | ||||
| CVE-2023-53787 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: da9063: fix null pointer deref with partial DT config When some of the da9063 regulators do not have corresponding DT nodes a null pointer dereference occurs on boot because such regulators have no init_data causing the pointers calculated in da9063_check_xvp_constraints() to be invalid. Do not dereference them in this case. | ||||
| CVE-2025-40080 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nbd: restrict sockets to TCP and UDP Recently, syzbot started to abuse NBD with all kinds of sockets. Commit cf1b2326b734 ("nbd: verify socket is supported during setup") made sure the socket supported a shutdown() method. Explicitely accept TCP and UNIX stream sockets. | ||||
| CVE-2025-40078 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Explicitly check accesses to bpf_sock_addr Syzkaller found a kernel warning on the following sock_addr program: 0: r0 = 0 1: r2 = *(u32 *)(r1 +60) 2: exit which triggers: verifier bug: error during ctx access conversion (0) This is happening because offset 60 in bpf_sock_addr corresponds to an implicit padding of 4 bytes, right after msg_src_ip4. Access to this padding isn't rejected in sock_addr_is_valid_access and it thus later fails to convert the access. This patch fixes it by explicitly checking the various fields of bpf_sock_addr in sock_addr_is_valid_access. I checked the other ctx structures and is_valid_access functions and didn't find any other similar cases. Other cases of (properly handled) padding are covered in new tests in a subsequent patch. | ||||
| CVE-2025-40076 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: rcar-host: Pass proper IRQ domain to generic_handle_domain_irq() Starting with commit dd26c1a23fd5 ("PCI: rcar-host: Switch to msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because the object of type struct irq_domain_info passed to: msi_create_parent_irq_domain() -> irq_domain_instantiate()() -> __irq_domain_instantiate() has no reference to the parent IRQ domain. Using msi->domain->parent as an argument for generic_handle_domain_irq() leads to below error: "Unable to handle kernel NULL pointer dereference at virtual address" This error was identified while switching the upcoming RZ/G3S PCIe host controller driver to msi_create_parent_irq_domain() (which was using a similar pattern to handle MSIs (see link section)), but it was not tested on hardware using the pcie-rcar-host controller driver due to lack of hardware. [mani: reworded subject and description] | ||||