Export limit exceeded: 19681 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (19681 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40140 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast syzbot reported WARNING in rtl8150_start_xmit/usb_submit_urb. This is the sequence of events that leads to the warning: rtl8150_start_xmit() { netif_stop_queue(); usb_submit_urb(dev->tx_urb); } rtl8150_set_multicast() { netif_stop_queue(); netif_wake_queue(); <-- wakes up TX queue before URB is done } rtl8150_start_xmit() { netif_stop_queue(); usb_submit_urb(dev->tx_urb); <-- double submission } rtl8150_set_multicast being the ndo_set_rx_mode callback should not be calling netif_stop_queue and notif_start_queue as these handle TX queue synchronization. The net core function dev_set_rx_mode handles the synchronization for rtl8150_set_multicast making it safe to remove these locks. | ||||
| CVE-2025-40143 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: dont report verifier bug for missing bpf_scc_visit on speculative path Syzbot generated a program that triggers a verifier_bug() call in maybe_exit_scc(). maybe_exit_scc() assumes that, when called for a state with insn_idx in some SCC, there should be an instance of struct bpf_scc_visit allocated for that SCC. Turns out the assumption does not hold for speculative execution paths. See example in the next patch. maybe_scc_exit() is called from update_branch_counts() for states that reach branch count of zero, meaning that path exploration for a particular path is finished. Path exploration can finish in one of three ways: a. Verification error is found. In this case, update_branch_counts() is called only for non-speculative paths. b. Top level BPF_EXIT is reached. Such instructions are never a part of an SCC, so compute_scc_callchain() in maybe_scc_exit() will return false, and maybe_scc_exit() will return early. c. A checkpoint is reached and matched. Checkpoints are created by is_state_visited(), which calls maybe_enter_scc(), which allocates bpf_scc_visit instances for checkpoints within SCCs. Hence, for non-speculative symbolic execution paths, the assumption still holds: if maybe_scc_exit() is called for a state within an SCC, bpf_scc_visit instance must exist. This patch removes the verifier_bug() call for speculative paths. | ||||
| CVE-2025-40147 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-throttle: fix access race during throttle policy activation On repeated cold boots we occasionally hit a NULL pointer crash in blk_should_throtl() when throttling is consulted before the throttle policy is fully enabled for the queue. Checking only q->td != NULL is insufficient during early initialization, so blkg_to_pd() for the throttle policy can still return NULL and blkg_to_tg() becomes NULL, which later gets dereferenced. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000156 ... pc : submit_bio_noacct+0x14c/0x4c8 lr : submit_bio_noacct+0x48/0x4c8 sp : ffff800087f0b690 x29: ffff800087f0b690 x28: 0000000000005f90 x27: ffff00068af393c0 x26: 0000000000080000 x25: 000000000002fbc0 x24: ffff000684ddcc70 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000 x20: 0000000000080000 x19: ffff000684ddcd08 x18: ffffffffffffffff x17: 0000000000000000 x16: ffff80008132a550 x15: 0000ffff98020fff x14: 0000000000000000 x13: 1fffe000d11d7021 x12: ffff000688eb810c x11: ffff00077ec4bb80 x10: ffff000688dcb720 x9 : ffff80008068ef60 x8 : 00000a6fb8a86e85 x7 : 000000000000111e x6 : 0000000000000002 x5 : 0000000000000246 x4 : 0000000000015cff x3 : 0000000000394500 x2 : ffff000682e35e40 x1 : 0000000000364940 x0 : 000000000000001a Call trace: submit_bio_noacct+0x14c/0x4c8 verity_map+0x178/0x2c8 __map_bio+0x228/0x250 dm_submit_bio+0x1c4/0x678 __submit_bio+0x170/0x230 submit_bio_noacct_nocheck+0x16c/0x388 submit_bio_noacct+0x16c/0x4c8 submit_bio+0xb4/0x210 f2fs_submit_read_bio+0x4c/0xf0 f2fs_mpage_readpages+0x3b0/0x5f0 f2fs_readahead+0x90/0xe8 Tighten blk_throtl_activated() to also require that the throttle policy bit is set on the queue: return q->td != NULL && test_bit(blkcg_policy_throtl.plid, q->blkcg_pols); This prevents blk_should_throtl() from accessing throttle group state until policy data has been attached to blkgs. | ||||
| CVE-2023-53784 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm: bridge: dw_hdmi: fix connector access for scdc Commit 5d844091f237 ("drm/scdc-helper: Pimp SCDC debugs") changed the scdc interface to pick up an i2c adapter from a connector instead. However, in the case of dw-hdmi, the wrong connector was being used to pass i2c adapter information, since dw-hdmi's embedded connector structure is only populated when the bridge attachment callback explicitly asks for it. drm-meson is handling connector creation, so this won't happen, leading to a NULL pointer dereference. Fix it by having scdc functions access dw-hdmi's current connector pointer instead, which is assigned during the bridge enablement stage. [narmstrong: moved Fixes tag before first S-o-b and added Reported-by tag] | ||||
| CVE-2025-40151 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: No support of struct argument in trampoline programs The current implementation does not support struct argument. This causes a oops when running bpf selftest: $ ./test_progs -a tracing_struct Oops[#1]: CPU -1 Unable to handle kernel paging request at virtual address 0000000000000018, era == 9000000085bef268, ra == 90000000844f3938 rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: 1-...0: (19 ticks this GP) idle=1094/1/0x4000000000000000 softirq=1380/1382 fqs=801 rcu: (detected by 0, t=5252 jiffies, g=1197, q=52 ncpus=4) Sending NMI from CPU 0 to CPUs 1: rcu: rcu_preempt kthread starved for 2495 jiffies! g1197 f0x0 RCU_GP_DOING_FQS(6) ->state=0x0 ->cpu=2 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:I stack:0 pid:15 tgid:15 ppid:2 task_flags:0x208040 flags:0x00000800 Stack : 9000000100423e80 0000000000000402 0000000000000010 90000001003b0680 9000000085d88000 0000000000000000 0000000000000040 9000000087159350 9000000085c2b9b0 0000000000000001 900000008704a000 0000000000000005 00000000ffff355b 00000000ffff355b 0000000000000000 0000000000000004 9000000085d90510 0000000000000000 0000000000000002 7b5d998f8281e86e 00000000ffff355c 7b5d998f8281e86e 000000000000003f 9000000087159350 900000008715bf98 0000000000000005 9000000087036000 900000008704a000 9000000100407c98 90000001003aff80 900000008715c4c0 9000000085c2b9b0 00000000ffff355b 9000000085c33d3c 00000000000000b4 0000000000000000 9000000007002150 00000000ffff355b 9000000084615480 0000000007000002 ... Call Trace: [<9000000085c2a868>] __schedule+0x410/0x1520 [<9000000085c2b9ac>] schedule+0x34/0x190 [<9000000085c33d38>] schedule_timeout+0x98/0x140 [<90000000845e9120>] rcu_gp_fqs_loop+0x5f8/0x868 [<90000000845ed538>] rcu_gp_kthread+0x260/0x2e0 [<900000008454e8a4>] kthread+0x144/0x238 [<9000000085c26b60>] ret_from_kernel_thread+0x28/0xc8 [<90000000844f20e4>] ret_from_kernel_thread_asm+0xc/0x88 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 2: NMI backtrace for cpu 2 skipped: idling at idle_exit+0x0/0x4 Reject it for now. | ||||
| CVE-2025-40153 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: hugetlb: avoid soft lockup when mprotect to large memory area When calling mprotect() to a large hugetlb memory area in our customer's workload (~300GB hugetlb memory), soft lockup was observed: watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916] CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7 Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mte_clear_page_tags+0x14/0x24 lr : mte_sync_tags+0x1c0/0x240 sp : ffff80003150bb80 x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000 x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458 x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000 x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2c x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000 x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000 Call trace: mte_clear_page_tags+0x14/0x24 set_huge_pte_at+0x25c/0x280 hugetlb_change_protection+0x220/0x430 change_protection+0x5c/0x8c mprotect_fixup+0x10c/0x294 do_mprotect_pkey.constprop.0+0x2e0/0x3d4 __arm64_sys_mprotect+0x24/0x44 invoke_syscall+0x50/0x160 el0_svc_common+0x48/0x144 do_el0_svc+0x30/0xe0 el0_svc+0x30/0xf0 el0t_64_sync_handler+0xc4/0x148 el0t_64_sync+0x1a4/0x1a8 Soft lockup is not triggered with THP or base page because there is cond_resched() called for each PMD size. Although the soft lockup was triggered by MTE, it should be not MTE specific. The other processing which takes long time in the loop may trigger soft lockup too. So add cond_resched() for hugetlb to avoid soft lockup. | ||||
| CVE-2025-40155 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: debugfs: Fix legacy mode page table dump logic In legacy mode, SSPTPTR is ignored if TT is not 00b or 01b. SSPTPTR maybe uninitialized or zero in that case and may cause oops like: Oops: general protection fault, probably for non-canonical address 0xf00087d3f000f000: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 786 Comm: cat Not tainted 6.16.0 #191 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 RIP: 0010:pgtable_walk_level+0x98/0x150 RSP: 0018:ffffc90000f279c0 EFLAGS: 00010206 RAX: 0000000040000000 RBX: ffffc90000f27ab0 RCX: 000000000000001e RDX: 0000000000000003 RSI: f00087d3f000f000 RDI: f00087d3f0010000 RBP: ffffc90000f27a00 R08: ffffc90000f27a98 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: f00087d3f000f000 R13: 0000000000000000 R14: 0000000040000000 R15: ffffc90000f27a98 FS: 0000764566dcb740(0000) GS:ffff8881f812c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000764566d44000 CR3: 0000000109d81003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <TASK> pgtable_walk_level+0x88/0x150 domain_translation_struct_show.isra.0+0x2d9/0x300 dev_domain_translation_struct_show+0x20/0x40 seq_read_iter+0x12d/0x490 ... Avoid walking the page table if TT is not 00b or 01b. | ||||
| CVE-2025-40166 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Check GuC running state before deregistering exec queue In normal operation, a registered exec queue is disabled and deregistered through the GuC, and freed only after the GuC confirms completion. However, if the driver is forced to unbind while the exec queue is still running, the user may call exec_destroy() after the GuC has already been stopped and CT communication disabled. In this case, the driver cannot receive a response from the GuC, preventing proper cleanup of exec queue resources. Fix this by directly releasing the resources when GuC is not running. Here is the failure dmesg log: " [ 468.089581] ---[ end trace 0000000000000000 ]--- [ 468.089608] pci 0000:03:00.0: [drm] *ERROR* GT0: GUC ID manager unclean (1/65535) [ 468.090558] pci 0000:03:00.0: [drm] GT0: total 65535 [ 468.090562] pci 0000:03:00.0: [drm] GT0: used 1 [ 468.090564] pci 0000:03:00.0: [drm] GT0: range 1..1 (1) [ 468.092716] ------------[ cut here ]------------ [ 468.092719] WARNING: CPU: 14 PID: 4775 at drivers/gpu/drm/xe/xe_ttm_vram_mgr.c:298 ttm_vram_mgr_fini+0xf8/0x130 [xe] " v2: use xe_uc_fw_is_running() instead of xe_guc_ct_enabled(). As CT may go down and come back during VF migration. (cherry picked from commit 9b42321a02c50a12b2beb6ae9469606257fbecea) | ||||
| CVE-2025-40169 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative offsets for ALU ops When verifying BPF programs, the check_alu_op() function validates instructions with ALU operations. The 'offset' field in these instructions is a signed 16-bit integer. The existing check 'insn->off > 1' was intended to ensure the offset is either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is signed, this check incorrectly accepts all negative values (e.g., -1). This commit tightens the validation by changing the condition to '(insn->off != 0 && insn->off != 1)'. This ensures that any value other than the explicitly permitted 0 and 1 is rejected, hardening the verifier against malformed BPF programs. | ||||
| CVE-2025-40173 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/ip6_tunnel: Prevent perpetual tunnel growth Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too. While ipv4 tunnel headroom adjustment growth was limited in commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"), ipv6 tunnel yet increases the headroom without any ceiling. Reflect ipv4 tunnel headroom adjustment limit on ipv6 version. Credits to Francesco Ruggeri, who was originally debugging this issue and wrote local Arista-specific patch and a reproducer. | ||||
| CVE-2025-40175 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: cleanup remaining SKBs in PTP flows When the driver requests Tx timestamp value, one of the first steps is to clone SKB using skb_get. It increases the reference counter for that SKB to prevent unexpected freeing by another component. However, there may be a case where the index is requested, SKB is assigned and never consumed by PTP flows - for example due to reset during running PTP apps. Add a check in release timestamping function to verify if the SKB assigned to Tx timestamp latch was freed, and release remaining SKBs. | ||||
| CVE-2025-40177 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Fix bootlog initialization ordering As soon as we queue MHI buffers to receive the bootlog from the device, we could be receiving data. Therefore all the resources needed to process that data need to be setup prior to queuing the buffers. We currently initialize some of the resources after queuing the buffers which creates a race between the probe() and any data that comes back from the device. If the uninitialized resources are accessed, we could see page faults. Fix the init ordering to close the race. | ||||
| CVE-2025-40179 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: verify orphan file size is not too big In principle orphan file can be arbitrarily large. However orphan replay needs to traverse it all and we also pin all its buffers in memory. Thus filesystems with absurdly large orphan files can lead to big amounts of memory consumed. Limit orphan file size to a sane value and also use kvmalloc() for allocating array of block descriptor structures to avoid large order allocations for sane but large orphan files. | ||||
| CVE-2025-40182 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: skcipher - Fix reqsize handling Commit afddce13ce81d ("crypto: api - Add reqsize to crypto_alg") introduced cra_reqsize field in crypto_alg struct to replace type specific reqsize fields. It looks like this was introduced specifically for ahash and acomp from the commit description as subsequent commits add necessary changes in these alg frameworks. However, this is being recommended for use in all crypto algs [1] instead of setting reqsize using crypto_*_set_reqsize(). Using cra_reqsize in skcipher algorithms, hence, causes memory corruptions and crashes as the underlying functions in the algorithm framework have not been updated to set the reqsize properly from cra_reqsize. [2] Add proper set_reqsize calls in the skcipher init function to properly initialize reqsize for these algorithms in the framework. [1]: https://lore.kernel.org/linux-crypto/aCL8BxpHr5OpT04k@gondor.apana.org.au/ [2]: https://gist.github.com/Pratham-T/24247446f1faf4b7843e4014d5089f6b | ||||
| CVE-2025-40185 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: ice_adapter: release xa entry on adapter allocation failure When ice_adapter_new() fails, the reserved XArray entry created by xa_insert() is not released. This causes subsequent insertions at the same index to return -EBUSY, potentially leading to NULL pointer dereferences. Reorder the operations as suggested by Przemek Kitszel: 1. Check if adapter already exists (xa_load) 2. Reserve the XArray slot (xa_reserve) 3. Allocate the adapter (ice_adapter_new) 4. Store the adapter (xa_store) | ||||
| CVE-2025-40187 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce() If new_asoc->peer.adaptation_ind=0 and sctp_ulpevent_make_authkey=0 and sctp_ulpevent_make_authkey() returns 0, then the variable ai_ev remains zero and the zero will be dereferenced in the sctp_ulpevent_free() function. | ||||
| CVE-2025-40191 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix kfd process ref leaking when userptr unmapping kfd_lookup_process_by_pid hold the kfd process reference to ensure it doesn't get destroyed while sending the segfault event to user space. Calling kfd_lookup_process_by_pid as function parameter leaks the kfd process refcount and miss the NULL pointer check if app process is already destroyed. | ||||
| CVE-2025-40195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mount: handle NULL values in mnt_ns_release() When calling in listmount() mnt_ns_release() may be passed a NULL pointer. Handle that case gracefully. | ||||
| CVE-2025-40197 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mc: Clear minor number before put device The device minor should not be cleared after the device is released. | ||||
| CVE-2025-40198 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid potential buffer over-read in parse_apply_sb_mount_options() Unlike other strings in the ext4 superblock, we rely on tune2fs to make sure s_mount_opts is NUL terminated. Harden parse_apply_sb_mount_options() by treating s_mount_opts as a potential __nonstring. | ||||