Export limit exceeded: 20396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20396 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-27890 | 1 Firebirdsql | 1 Firebird | 2026-04-24 | 8.2 High |
| Firebird is an open-source relational database management system. In versions prior to 5.0.4, 4.0.7 and 3.0.14, when processing CNCT_specific_data segments during authentication, the server assumes segments arrive in strictly ascending order. If segments arrive out of order, the Array class's grow() method computes a negative size value, causing a SIGSEGV crash. An unauthenticated attacker who knows only the server's IP and port can exploit this to crash the server. This issue has been fixed in versions 5.0.4, 4.0.7 and 3.0.14. | ||||
| CVE-2026-23359 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack-out-of-bounds write in devmap get_upper_ifindexes() iterates over all upper devices and writes their indices into an array without checking bounds. Also the callers assume that the max number of upper devices is MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack, but that assumption is not correct and the number of upper devices could be larger than MAX_NEST_DEV (e.g., many macvlans), causing a stack-out-of-bounds write. Add a max parameter to get_upper_ifindexes() to avoid the issue. When there are too many upper devices, return -EOVERFLOW and abort the redirect. To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS. Then send a packet to the device to trigger the XDP redirect path. | ||||
| CVE-2026-23361 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X interrupt to the host using a writel(), which generates a PCI posted write transaction. There's no completion for posted writes, so the writel() may return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also unmaps the outbound ATU entry used for the PCI write, so the write races with the unmap. If the PCI write loses the race with the ATU unmap, the write may corrupt host memory or cause IOMMU errors, e.g., these when running fio with a larger queue depth against nvmet-pci-epf: arm-smmu-v3 fc900000.iommu: 0x0000010000000010 arm-smmu-v3 fc900000.iommu: 0x0000020000000000 arm-smmu-v3 fc900000.iommu: 0x000000090000f040 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0 arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0 Flush the write by performing a readl() of the same address to ensure that the write has reached the destination before the ATU entry is unmapped. The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit 8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there it was solved by dedicating an outbound iATU only for MSI. We can't do the same for MSI-X because each vector can have a different msg_addr and the msg_addr may be changed while the vector is masked. [bhelgaas: commit log] | ||||
| CVE-2026-23406 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix side-effect bug in match_char() macro usage The match_char() macro evaluates its character parameter multiple times when traversing differential encoding chains. When invoked with *str++, the string pointer advances on each iteration of the inner do-while loop, causing the DFA to check different characters at each iteration and therefore skip input characters. This results in out-of-bounds reads when the pointer advances past the input buffer boundary. [ 94.984676] ================================================================== [ 94.985301] BUG: KASAN: slab-out-of-bounds in aa_dfa_match+0x5ae/0x760 [ 94.985655] Read of size 1 at addr ffff888100342000 by task file/976 [ 94.986319] CPU: 7 UID: 1000 PID: 976 Comm: file Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy) [ 94.986322] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 94.986329] Call Trace: [ 94.986341] <TASK> [ 94.986347] dump_stack_lvl+0x5e/0x80 [ 94.986374] print_report+0xc8/0x270 [ 94.986384] ? aa_dfa_match+0x5ae/0x760 [ 94.986388] kasan_report+0x118/0x150 [ 94.986401] ? aa_dfa_match+0x5ae/0x760 [ 94.986405] aa_dfa_match+0x5ae/0x760 [ 94.986408] __aa_path_perm+0x131/0x400 [ 94.986418] aa_path_perm+0x219/0x2f0 [ 94.986424] apparmor_file_open+0x345/0x570 [ 94.986431] security_file_open+0x5c/0x140 [ 94.986442] do_dentry_open+0x2f6/0x1120 [ 94.986450] vfs_open+0x38/0x2b0 [ 94.986453] ? may_open+0x1e2/0x2b0 [ 94.986466] path_openat+0x231b/0x2b30 [ 94.986469] ? __x64_sys_openat+0xf8/0x130 [ 94.986477] do_file_open+0x19d/0x360 [ 94.986487] do_sys_openat2+0x98/0x100 [ 94.986491] __x64_sys_openat+0xf8/0x130 [ 94.986499] do_syscall_64+0x8e/0x660 [ 94.986515] ? count_memcg_events+0x15f/0x3c0 [ 94.986526] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986540] ? handle_mm_fault+0x1639/0x1ef0 [ 94.986551] ? vma_start_read+0xf0/0x320 [ 94.986558] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986561] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986563] ? fpregs_assert_state_consistent+0x50/0xe0 [ 94.986572] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986574] ? arch_exit_to_user_mode_prepare+0x9/0xb0 [ 94.986587] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986588] ? irqentry_exit+0x3c/0x590 [ 94.986595] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 94.986597] RIP: 0033:0x7fda4a79c3ea Fix by extracting the character value before invoking match_char, ensuring single evaluation per outer loop. | ||||
| CVE-2026-23390 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing/dma: Cap dma_map_sg tracepoint arrays to prevent buffer overflow The dma_map_sg tracepoint can trigger a perf buffer overflow when tracing large scatter-gather lists. With devices like virtio-gpu creating large DRM buffers, nents can exceed 1000 entries, resulting in: phys_addrs: 1000 * 8 bytes = 8,000 bytes dma_addrs: 1000 * 8 bytes = 8,000 bytes lengths: 1000 * 4 bytes = 4,000 bytes Total: ~20,000 bytes This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing: WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405 perf buffer not large enough, wanted 24620, have 8192 Cap all three dynamic arrays at 128 entries using min() in the array size calculation. This ensures arrays are only as large as needed (up to the cap), avoiding unnecessary memory allocation for small operations while preventing overflow for large ones. The tracepoint now records the full nents/ents counts and a truncated flag so users can see when data has been capped. Changes in v2: - Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from Steven Rostedt) - This allocates only what's needed up to the cap, avoiding waste for small operations Reviwed-by: Sean Anderson <sean.anderson@linux.dev> | ||||
| CVE-2026-5532 | 1 Scrapegraphai | 1 Scrapegraph-ai | 2026-04-24 | 6.3 Medium |
| A vulnerability was found in ScrapeGraphAI scrapegraph-ai up to 1.74.0. The affected element is the function create_sandbox_and_execute of the file scrapegraphai/nodes/generate_code_node.py of the component GenerateCodeNode Component. The manipulation results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-5528 | 1 Moussaabbadla | 1 Code-screenshot-mcp | 2026-04-24 | 6.3 Medium |
| A security vulnerability has been detected in MoussaabBadla code-screenshot-mcp up to 0.1.0. This affects an unknown part of the component HTTP Interface. Such manipulation leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-5125 | 1 Raine | 1 Consult-llm-mcp | 2026-04-24 | 5.3 Medium |
| A vulnerability was detected in raine consult-llm-mcp up to 2.5.3. Affected by this vulnerability is the function child_process.execSync of the file src/server.ts. The manipulation of the argument git_diff.base_ref/git_diff.files results in os command injection. The attack is only possible with local access. The exploit is now public and may be used. Upgrading to version 2.5.4 addresses this issue. The patch is identified as 4abf297b34e5e8a9cb364b35f52c5f0ca1d599d3. Upgrading the affected component is recommended. | ||||
| CVE-2026-5802 | 1 Idachev | 1 Mcp-javadc | 2026-04-24 | 7.3 High |
| A vulnerability was identified in idachev mcp-javadc up to 1.2.4. Impacted is an unknown function of the component HTTP Interface. Such manipulation of the argument jarFilePath leads to os command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-5831 | 1 Agions | 1 Taskflow-ai | 2026-04-24 | 6.3 Medium |
| A security flaw has been discovered in Agions taskflow-ai up to 2.1.8. This impacts an unknown function of the file src/mcp/server/handlers.ts of the component terminal_execute. Performing a manipulation results in os command injection. The attack is possible to be carried out remotely. Upgrading to version 2.1.9 will fix this issue. The patch is named c1550b445b9f24f38c4414e9a545f5f79f23a0fe. Upgrading the affected component is recommended. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. | ||||
| CVE-2026-6108 | 2 1panel, Maxkb | 2 Maxkb, Maxkb | 2026-04-24 | 6.3 Medium |
| A vulnerability was found in 1Panel-dev MaxKB up to 2.6.1. The affected element is the function execute of the file apps/application/flow/step_node/mcp_node/impl/base_mcp_node.py of the component Model Context Protocol Node. Performing a manipulation results in os command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. You should upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. | ||||
| CVE-2026-6130 | 1 Chatboxai | 1 Chatbox | 2026-04-24 | 7.3 High |
| A flaw has been found in chatboxai chatbox up to 1.20.0. This impacts the function StdioClientTransport of the file src/main/mcp/ipc-stdio-transport.ts of the component Model Context Protocol Server Management System. Executing a manipulation of the argument args/env can lead to os command injection. The attack can be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-6141 | 1 Danielmiessler | 1 Personal Ai Infrastructure | 2026-04-24 | 6.3 Medium |
| A vulnerability was determined in danielmiessler Personal_AI_Infrastructure up to 2.3.0. Affected is an unknown function of the file Skills/Parser/Tools/parse_url.ts. Executing a manipulation can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. This patch is called 14322e87e58bf585cf3c7b9295578a6eb7dc4945. It is advisable to implement a patch to correct this issue. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. | ||||
| CVE-2026-35582 | 2 Nationalsecurityagency, Nsa | 2 Emissary, Emissary | 2026-04-24 | 8.8 High |
| Emissary is a P2P based data-driven workflow engine. In versions 8.42.0 and below, Executrix.getCommand() is vulnerable to OS command injection because it interpolates temporary file paths into a /bin/sh -c shell command string without any escaping or input validation. The IN_FILE_ENDING and OUT_FILE_ENDING configuration keys flow directly into these paths, allowing a place author who can write or modify a .cfg file to inject arbitrary shell metacharacters that execute OS commands in the JVM process's security context. The framework already sanitizes placeName via an allowlist before embedding it in the same shell string, but applies no equivalent sanitization to file ending values. No runtime privileges beyond place configuration authorship, and no API or network access, are required to exploit this vulnerability. This is a framework-level defect with no safe mitigation available to downstream implementors, as Executrix provides neither escaping nor documented preconditions against metacharacters in file ending inputs. This issue has been fixed in version 8.43.0. | ||||
| CVE-2026-5007 | 1 Kazuph | 1 Mcp-docs-rag | 2026-04-24 | 5.3 Medium |
| A vulnerability was identified in kazuph mcp-docs-rag up to 0.5.0. Affected is the function cloneRepository of the file src/index.ts of the component add_git_repository/add_text_file. The manipulation leads to os command injection. The attack needs to be performed locally. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-5012 | 1 Elecv2 | 1 Elecv2p | 2026-04-24 | 7.3 High |
| A flaw has been found in elecV2 elecV2P up to 3.8.3. This issue affects the function pm2run of the file /rpc. Executing a manipulation can lead to os command injection. The attack can be executed remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-5023 | 1 Dedeveloper23 | 1 Codebase-mcp | 2026-04-24 | 5.3 Medium |
| A vulnerability has been found in DeDeveloper23 codebase-mcp up to 3ec749d237dd8eabbeef48657cf917275792fde6. This vulnerability affects the function getCodebase/getRemoteCodebase/saveCodebase of the file src/tools/codebase.ts of the component RepoMix Command Handler. Such manipulation leads to os command injection. The attack needs to be performed locally. The exploit has been disclosed to the public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-4840 | 1 Netcore | 1 Power 15ax | 2026-04-24 | 8.8 High |
| A security flaw has been discovered in Netcore Power 15AX up to 3.0.0.6938. Affected by this issue is the function setTools of the file /bin/netis.cgi of the component Diagnostic Tool Interface. Performing a manipulation of the argument IpAddr results in os command injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-4627 | 1 D-link | 2 Dir-825, Dir-825r | 2026-04-24 | 7.2 High |
| A vulnerability was found in D-Link DIR-825 and DIR-825R 1.0.5/4.5.1. Affected is the function handler_update_system_time of the file libdeuteron_modules.so of the component NTP Service. The manipulation results in os command injection. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-4585 | 1 Tiandy | 1 Easy7 Integrated Management Platform | 2026-04-24 | 9.8 Critical |
| A vulnerability has been found in Tiandy Easy7 Integrated Management Platform up to 7.17.0. This vulnerability affects unknown code of the file /Easy7/apps/WebService/ImportSystemConfiguration.jsp of the component Configuration Handler. The manipulation of the argument File leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||