Export limit exceeded: 20047 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20047 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50567 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fs: jfs: fix shift-out-of-bounds in dbAllocAG Syzbot found a crash : UBSAN: shift-out-of-bounds in dbAllocAG. The underlying bug is the missing check of bmp->db_agl2size. The field can be greater than 64 and trigger the shift-out-of-bounds. Fix this bug by adding a check of bmp->db_agl2size in dbMount since this field is used in many following functions. The upper bound for this field is L2MAXL2SIZE - L2MAXAG, thanks for the help of Dave Kleikamp. Note that, for maintenance, I reorganized error handling code of dbMount. | ||||
| CVE-2022-50569 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Update ipcomp_scratches with NULL when freed Currently if ipcomp_alloc_scratches() fails to allocate memory ipcomp_scratches holds obsolete address. So when we try to free the percpu scratches using ipcomp_free_scratches() it tries to vfree non existent vm area. Described below: static void * __percpu *ipcomp_alloc_scratches(void) { ... scratches = alloc_percpu(void *); if (!scratches) return NULL; ipcomp_scratches does not know about this allocation failure. Therefore holding the old obsolete address. ... } So when we free, static void ipcomp_free_scratches(void) { ... scratches = ipcomp_scratches; Assigning obsolete address from ipcomp_scratches if (!scratches) return; for_each_possible_cpu(i) vfree(*per_cpu_ptr(scratches, i)); Trying to free non existent page, causing warning: trying to vfree existent vm area. ... } Fix this breakage by updating ipcomp_scrtches with NULL when scratches is freed | ||||
| CVE-2023-54114 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment() As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff. | ||||
| CVE-2023-54051 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: do not allow gso_size to be set to GSO_BY_FRAGS One missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again [1] Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff), because this magic value is used by the kernel. [1] general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-20230809-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500 Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01 RSP: 0018:ffffc90003d3f1c8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 000000000001fffe RCX: 0000000000000000 RDX: 000000000000000e RSI: ffffffff882a3115 RDI: 0000000000000070 RBP: ffffc90003d3f378 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 5ee4a93e456187d6 R12: 000000000001ffc6 R13: dffffc0000000000 R14: 0000000000000008 R15: 000000000000ffff FS: 00005555563f2380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020020000 CR3: 000000001626d000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120 skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53 __skb_gso_segment+0x339/0x710 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625 __dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329 dev_queue_xmit include/linux/netdevice.h:3082 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:727 [inline] sock_sendmsg+0xd9/0x180 net/socket.c:750 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2496 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2550 __sys_sendmsg+0x117/0x1e0 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ff27cdb34d9 | ||||
| CVE-2023-54160 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_sdei: Fix sleep from invalid context BUG Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra triggers: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0 preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by cpuhp/0/24: #0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130 irq event stamp: 36 hardirqs last enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0 hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248 softirqs last enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...] Hardware name: WIWYNN Mt.Jade Server [...] Call trace: dump_backtrace+0x114/0x120 show_stack+0x20/0x70 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x228 rt_spin_lock+0x70/0x120 sdei_cpuhp_up+0x3c/0x130 cpuhp_invoke_callback+0x250/0xf08 cpuhp_thread_fun+0x120/0x248 smpboot_thread_fn+0x280/0x320 kthread+0x130/0x140 ret_from_fork+0x10/0x20 sdei_cpuhp_up() is called in the STARTING hotplug section, which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry instead to execute the cpuhp cb later, with preemption enabled. SDEI originally got its own cpuhp slot to allow interacting with perf. It got superseded by pNMI and this early slot is not relevant anymore. [1] Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the calling CPU. It is checked that preemption is disabled for them. _ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'. Preemption is enabled in those threads, but their cpumask is limited to 1 CPU. Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb don't trigger them. Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call which acts on the calling CPU. [1]: https://lore.kernel.org/all/5813b8c5-ae3e-87fd-fccc-94c9cd08816d@arm.com/ | ||||
| CVE-2023-53707 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix integer overflow in amdgpu_cs_pass1 The type of size is unsigned int, if size is 0x40000000, there will be an integer overflow, size will be zero after size *= sizeof(uint32_t), will cause uninitialized memory to be referenced later. | ||||
| CVE-2023-53708 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects If a badly constructed firmware includes multiple `ACPI_TYPE_PACKAGE` objects while evaluating the AMD LPS0 _DSM, there will be a memory leak. Explicitly guard against this. | ||||
| CVE-2023-53712 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9317/1: kexec: Make smp stop calls asynchronous If a panic is triggered by a hrtimer interrupt all online cpus will be notified and set offline. But as highlighted by commit 19dbdcb8039c ("smp: Warn on function calls from softirq context") this call should not be made synchronous with disabled interrupts: softdog: Initiating panic Kernel panic - not syncing: Software Watchdog Timer expired WARNING: CPU: 1 PID: 0 at kernel/smp.c:753 smp_call_function_many_cond unwind_backtrace: show_stack dump_stack_lvl __warn warn_slowpath_fmt smp_call_function_many_cond smp_call_function crash_smp_send_stop.part.0 machine_crash_shutdown __crash_kexec panic softdog_fire __hrtimer_run_queues hrtimer_interrupt Make the smp call for machine_crash_nonpanic_core() asynchronous. | ||||
| CVE-2025-68774 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix missing hfs_bnode_get() in __hfs_bnode_create When sync() and link() are called concurrently, both threads may enter hfs_bnode_find() without finding the node in the hash table and proceed to create it. Thread A: hfsplus_write_inode() -> hfsplus_write_system_inode() -> hfs_btree_write() -> hfs_bnode_find(tree, 0) -> __hfs_bnode_create(tree, 0) Thread B: hfsplus_create_cat() -> hfs_brec_insert() -> hfs_bnode_split() -> hfs_bmap_alloc() -> hfs_bnode_find(tree, 0) -> __hfs_bnode_create(tree, 0) In this case, thread A creates the bnode, sets refcnt=1, and hashes it. Thread B also tries to create the same bnode, notices it has already been inserted, drops its own instance, and uses the hashed one without getting the node. ``` node2 = hfs_bnode_findhash(tree, cnid); if (!node2) { <- Thread A hash = hfs_bnode_hash(cnid); node->next_hash = tree->node_hash[hash]; tree->node_hash[hash] = node; tree->node_hash_cnt++; } else { <- Thread B spin_unlock(&tree->hash_lock); kfree(node); wait_event(node2->lock_wq, !test_bit(HFS_BNODE_NEW, &node2->flags)); return node2; } ``` However, hfs_bnode_find() requires each call to take a reference. Here both threads end up setting refcnt=1. When they later put the node, this triggers: BUG_ON(!atomic_read(&node->refcnt)) In this scenario, Thread B in fact finds the node in the hash table rather than creating a new one, and thus must take a reference. Fix this by calling hfs_bnode_get() when reusing a bnode newly created by another thread to ensure the refcount is updated correctly. A similar bug was fixed in HFS long ago in commit a9dc087fd3c4 ("fix missing hfs_bnode_get() in __hfs_bnode_create") but the same issue remained in HFS+ until now. | ||||
| CVE-2023-54118 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: setup GPIO controller later in probe The GPIO controller component of the sc16is7xx driver is setup too early, which can result in a race condition where another device tries to utilise the GPIO lines before the sc16is7xx device has finished initialising. This issue manifests itself as an Oops when the GPIO lines are configured: Unable to handle kernel read from unreadable memory at virtual address ... pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx] ... Call trace: sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] gpiod_direction_output_raw_commit+0x64/0x318 gpiod_direction_output+0xb0/0x170 create_gpio_led+0xec/0x198 gpio_led_probe+0x16c/0x4f0 platform_drv_probe+0x5c/0xb0 really_probe+0xe8/0x448 driver_probe_device+0xe8/0x138 __device_attach_driver+0x94/0x118 bus_for_each_drv+0x8c/0xe0 __device_attach+0x100/0x1b8 device_initial_probe+0x28/0x38 bus_probe_device+0xa4/0xb0 deferred_probe_work_func+0x90/0xe0 process_one_work+0x1c4/0x480 worker_thread+0x54/0x430 kthread+0x138/0x150 ret_from_fork+0x10/0x1c This patch moves the setup of the GPIO controller functions to later in the probe function, ensuring the sc16is7xx device has already finished initialising by the time other devices try to make use of the GPIO lines. The error handling has also been reordered to reflect the new initialisation order. | ||||
| CVE-2025-68803 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: NFSv4 file creation neglects setting ACL An NFSv4 client that sets an ACL with a named principal during file creation retrieves the ACL afterwards, and finds that it is only a default ACL (based on the mode bits) and not the ACL that was requested during file creation. This violates RFC 8881 section 6.4.1.3: "the ACL attribute is set as given". The issue occurs in nfsd_create_setattr(), which calls nfsd_attrs_valid() to determine whether to call nfsd_setattr(). However, nfsd_attrs_valid() checks only for iattr changes and security labels, but not POSIX ACLs. When only an ACL is present, the function returns false, nfsd_setattr() is skipped, and the POSIX ACL is never applied to the inode. Subsequently, when the client retrieves the ACL, the server finds no POSIX ACL on the inode and returns one generated from the file's mode bits rather than returning the originally-specified ACL. | ||||
| CVE-2023-54200 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: always release netdev hooks from notifier This reverts "netfilter: nf_tables: skip netdev events generated on netns removal". The problem is that when a veth device is released, the veth release callback will also queue the peer netns device for removal. Its possible that the peer netns is also slated for removal. In this case, the device memory is already released before the pre_exit hook of the peer netns runs: BUG: KASAN: slab-use-after-free in nf_hook_entry_head+0x1b8/0x1d0 Read of size 8 at addr ffff88812c0124f0 by task kworker/u8:1/45 Workqueue: netns cleanup_net Call Trace: nf_hook_entry_head+0x1b8/0x1d0 __nf_unregister_net_hook+0x76/0x510 nft_netdev_unregister_hooks+0xa0/0x220 __nft_release_hook+0x184/0x490 nf_tables_pre_exit_net+0x12f/0x1b0 .. Order is: 1. First netns is released, veth_dellink() queues peer netns device for removal 2. peer netns is queued for removal 3. peer netns device is released, unreg event is triggered 4. unreg event is ignored because netns is going down 5. pre_exit hook calls nft_netdev_unregister_hooks but device memory might be free'd already. | ||||
| CVE-2023-54203 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr When smb1 mount fails, KASAN detect slab-out-of-bounds in init_smb2_rsp_hdr like the following one. For smb1 negotiate(56bytes) , init_smb2_rsp_hdr() for smb2 is called. The issue occurs while handling smb1 negotiate as smb2 server operations. Add smb server operations for smb1 (get_cmd_val, init_rsp_hdr, allocate_rsp_buf, check_user_session) to handle smb1 negotiate so that smb2 server operation does not handle it. [ 411.400423] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers [ 411.400452] CIFS: Attempting to mount \\192.168.45.139\homes [ 411.479312] ksmbd: init_smb2_rsp_hdr : 492 [ 411.479323] ================================================================== [ 411.479327] BUG: KASAN: slab-out-of-bounds in init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479369] Read of size 16 at addr ffff888488ed0734 by task kworker/14:1/199 [ 411.479379] CPU: 14 PID: 199 Comm: kworker/14:1 Tainted: G OE 6.1.21 #3 [ 411.479386] Hardware name: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3801 08/23/2019 [ 411.479390] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] [ 411.479425] Call Trace: [ 411.479428] <TASK> [ 411.479432] dump_stack_lvl+0x49/0x63 [ 411.479444] print_report+0x171/0x4a8 [ 411.479452] ? kasan_complete_mode_report_info+0x3c/0x200 [ 411.479463] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479497] kasan_report+0xb4/0x130 [ 411.479503] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479537] kasan_check_range+0x149/0x1e0 [ 411.479543] memcpy+0x24/0x70 [ 411.479550] init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479585] handle_ksmbd_work+0x109/0x760 [ksmbd] [ 411.479616] ? _raw_spin_unlock_irqrestore+0x50/0x50 [ 411.479624] ? smb3_encrypt_resp+0x340/0x340 [ksmbd] [ 411.479656] process_one_work+0x49c/0x790 [ 411.479667] worker_thread+0x2b1/0x6e0 [ 411.479674] ? process_one_work+0x790/0x790 [ 411.479680] kthread+0x177/0x1b0 [ 411.479686] ? kthread_complete_and_exit+0x30/0x30 [ 411.479692] ret_from_fork+0x22/0x30 [ 411.479702] </TASK> | ||||
| CVE-2023-54210 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor() KASAN reports that there's a use-after-free in hci_remove_adv_monitor(). Trawling through the disassembly, you can see that the complaint is from the access in bt_dev_dbg() under the HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because msft_remove_monitor() can end up freeing the monitor structure. Specifically: hci_remove_adv_monitor() -> msft_remove_monitor() -> msft_remove_monitor_sync() -> msft_le_cancel_monitor_advertisement_cb() -> hci_free_adv_monitor() Let's fix the problem by just stashing the relevant data when it's still valid. | ||||
| CVE-2023-54213 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: sisusbvga: Add endpoint checks The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95 RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline] sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379 sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline] sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline] sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177 sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869 ... The problem was caused by the fact that the driver does not check whether the endpoints it uses are actually present and have the appropriate types. This can be fixed by adding a simple check of the endpoints. | ||||
| CVE-2023-54220 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix oops for port->pm on uart_change_pm() Unloading a hardware specific 8250 driver can produce error "Unable to handle kernel paging request at virtual address" about ten seconds after unloading the driver. This happens on uart_hangup() calling uart_change_pm(). Turns out commit 04e82793f068 ("serial: 8250: Reinit port->pm on port specific driver unbind") was only a partial fix. If the hardware specific driver has initialized port->pm function, we need to clear port->pm too. Just reinitializing port->ops does not do this. Otherwise serial8250_pm() will call port->pm() instead of serial8250_do_pm(). | ||||
| CVE-2023-54225 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ipa: only reset hashed tables when supported Last year, the code that manages GSI channel transactions switched from using spinlock-protected linked lists to using indexes into the ring buffer used for a channel. Recently, Google reported seeing transaction reference count underflows occasionally during shutdown. Doug Anderson found a way to reproduce the issue reliably, and bisected the issue to the commit that eliminated the linked lists and the lock. The root cause was ultimately determined to be related to unused transactions being committed as part of the modem shutdown cleanup activity. Unused transactions are not normally expected (except in error cases). The modem uses some ranges of IPA-resident memory, and whenever it shuts down we zero those ranges. In ipa_filter_reset_table() a transaction is allocated to zero modem filter table entries. If hashing is not supported, hashed table memory should not be zeroed. But currently nothing prevents that, and the result is an unused transaction. Something similar occurs when we zero routing table entries for the modem. By preventing any attempt to clear hashed tables when hashing is not supported, the reference count underflow is avoided in this case. Note that there likely remains an issue with properly freeing unused transactions (if they occur due to errors). This patch addresses only the underflows that Google originally reported. | ||||
| CVE-2023-54227 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix tags leak when shrink nr_hw_queues Although we don't need to realloc set->tags[] when shrink nr_hw_queues, we need to free them. Or these tags will be leaked. How to reproduce: 1. mount -t configfs configfs /mnt 2. modprobe null_blk nr_devices=0 submit_queues=8 3. mkdir /mnt/nullb/nullb0 4. echo 1 > /mnt/nullb/nullb0/power 5. echo 4 > /mnt/nullb/nullb0/submit_queues 6. rmdir /mnt/nullb/nullb0 In step 4, will alloc 9 tags (8 submit queues and 1 poll queue), then in step 5, new_nr_hw_queues = 5 (4 submit queues and 1 poll queue). At last in step 6, only these 5 tags are freed, the other 4 tags leaked. | ||||
| CVE-2023-54232 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: m68k: Only force 030 bus error if PC not in exception table __get_kernel_nofault() does copy data in supervisor mode when forcing a task backtrace log through /proc/sysrq_trigger. This is expected cause a bus error exception on e.g. NULL pointer dereferencing when logging a kernel task has no workqueue associated. This bus error ought to be ignored. Our 030 bus error handler is ill equipped to deal with this: Whenever ssw indicates a kernel mode access on a data fault, we don't even attempt to handle the fault and instead always send a SEGV signal (or panic). As a result, the check for exception handling at the fault PC (buried in send_sig_fault() which gets called from do_page_fault() eventually) is never used. In contrast, both 040 and 060 access error handlers do not care whether a fault happened on supervisor mode access, and will call do_page_fault() on those, ultimately honoring the exception table. Add a check in bus_error030 to call do_page_fault() in case we do have an entry for the fault PC in our exception table. I had attempted a fix for this earlier in 2019 that did rely on testing pagefault_disabled() (see link below) to achieve the same thing, but this patch should be more generic. Tested on 030 Atari Falcon. | ||||
| CVE-2023-54236 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/net_failover: fix txq exceeding warning The failover txq is inited as 16 queues. when a packet is transmitted from the failover device firstly, the failover device will select the queue which is returned from the primary device if the primary device is UP and running. If the primary device txq is bigger than the default 16, it can lead to the following warning: eth0 selects TX queue 18, but real number of TX queues is 16 The warning backtrace is: [ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1 [ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014 [ 32.147730] Call Trace: [ 32.147971] <TASK> [ 32.148183] dump_stack_lvl+0x48/0x70 [ 32.148514] dump_stack+0x10/0x20 [ 32.148820] netdev_core_pick_tx+0xb1/0xe0 [ 32.149180] __dev_queue_xmit+0x529/0xcf0 [ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0 [ 32.149967] ip_finish_output2+0x278/0x560 [ 32.150327] __ip_finish_output+0x1fe/0x2f0 [ 32.150690] ip_finish_output+0x2a/0xd0 [ 32.151032] ip_output+0x7a/0x110 [ 32.151337] ? __pfx_ip_finish_output+0x10/0x10 [ 32.151733] ip_local_out+0x5e/0x70 [ 32.152054] ip_send_skb+0x19/0x50 [ 32.152366] udp_send_skb.isra.0+0x163/0x3a0 [ 32.152736] udp_sendmsg+0xba8/0xec0 [ 32.153060] ? __folio_memcg_unlock+0x25/0x60 [ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 32.153854] ? sock_has_perm+0x85/0xa0 [ 32.154190] inet_sendmsg+0x6d/0x80 [ 32.154508] ? inet_sendmsg+0x6d/0x80 [ 32.154838] sock_sendmsg+0x62/0x70 [ 32.155152] ____sys_sendmsg+0x134/0x290 [ 32.155499] ___sys_sendmsg+0x81/0xc0 [ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0 [ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0 [ 32.156649] ? get_random_u16+0x69/0xf0 [ 32.156989] ? __fget_light+0xcf/0x110 [ 32.157326] __sys_sendmmsg+0xc4/0x210 [ 32.157657] ? __sys_connect+0xb7/0xe0 [ 32.157995] ? __audit_syscall_entry+0xce/0x140 [ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0 [ 32.158820] __x64_sys_sendmmsg+0x24/0x30 [ 32.159171] do_syscall_64+0x38/0x90 [ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix that by reducing txq number as the non-existent primary-dev does. | ||||