Export limit exceeded: 351284 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 80869 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (80869 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-39839 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix OOB read/write in network-coding decode batadv_nc_skb_decode_packet() trusts coded_len and checks only against skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing payload headroom, and the source skb length is not verified, allowing an out-of-bounds read and a small out-of-bounds write. Validate that coded_len fits within the payload area of both destination and source sk_buffs before XORing. | ||||
| CVE-2025-39835 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: do not propagate ENODATA disk errors into xattr code ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code; namely, that the requested attribute name could not be found. However, a medium error from disk may also return ENODATA. At best, this medium error may escape to userspace as "attribute not found" when in fact it's an IO (disk) error. At worst, we may oops in xfs_attr_leaf_get() when we do: error = xfs_attr_leaf_hasname(args, &bp); if (error == -ENOATTR) { xfs_trans_brelse(args->trans, bp); return error; } because an ENODATA/ENOATTR error from disk leaves us with a null bp, and the xfs_trans_brelse will then null-deref it. As discussed on the list, we really need to modify the lower level IO functions to trap all disk errors and ensure that we don't let unique errors like this leak up into higher xfs functions - many like this should be remapped to EIO. However, this patch directly addresses a reported bug in the xattr code, and should be safe to backport to stable kernels. A larger-scope patch to handle more unique errors at lower levels can follow later. (Note, prior to 07120f1abdff we did not oops, but we did return the wrong error code to userspace.) | ||||
| CVE-2025-39828 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control(). syzbot reported the splat below. [0] When atmtcp_v_open() or atmtcp_v_close() is called via connect() or close(), atmtcp_send_control() is called to send an in-kernel special message. The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length. Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc. The notable thing is struct atmtcp_control is uAPI but has a space for an in-kernel pointer. struct atmtcp_control { struct atmtcp_hdr hdr; /* must be first */ ... atm_kptr_t vcc; /* both directions */ ... } __ATM_API_ALIGN; typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t; The special message is processed in atmtcp_recv_control() called from atmtcp_c_send(). atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths: 1. .ndo_start_xmit() (vcc->send() == atm_send_aal0()) 2. vcc_sendmsg() The problem is sendmsg() does not validate the message length and userspace can abuse atmtcp_recv_control() to overwrite any kptr by atmtcp_control. Let's add a new ->pre_send() hook to validate messages from sendmsg(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f] CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline] RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297 Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203 RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000 R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 ____sys_sendmsg+0x505/0x830 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8d7e96a4a9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9 RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005 RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250 </TASK> Modules linked in: | ||||
| CVE-2025-39826 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: rose: convert 'use' field to refcount_t The 'use' field in struct rose_neigh is used as a reference counter but lacks atomicity. This can lead to race conditions where a rose_neigh structure is freed while still being referenced by other code paths. For example, when rose_neigh->use becomes zero during an ioctl operation via rose_rt_ioctl(), the structure may be removed while its timer is still active, potentially causing use-after-free issues. This patch changes the type of 'use' from unsigned short to refcount_t and updates all code paths to use rose_neigh_hold() and rose_neigh_put() which operate reference counts atomically. | ||||
| CVE-2025-39824 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: asus: fix UAF via HID_CLAIMED_INPUT validation After hid_hw_start() is called hidinput_connect() will eventually be called to set up the device with the input layer since the HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect() all input and output reports are processed and corresponding hid_inputs are allocated and configured via hidinput_configure_usages(). This process involves slot tagging report fields and configuring usages by setting relevant bits in the capability bitmaps. However it is possible that the capability bitmaps are not set at all leading to the subsequent hidinput_has_been_populated() check to fail leading to the freeing of the hid_input and the underlying input device. This becomes problematic because a malicious HID device like a ASUS ROG N-Key keyboard can trigger the above scenario via a specially crafted descriptor which then leads to a user-after-free when the name of the freed input device is written to later on after hid_hw_start(). Below, report 93 intentionally utilises the HID_UP_UNDEFINED Usage Page which is skipped during usage configuration, leading to the frees. 0x05, 0x0D, // Usage Page (Digitizer) 0x09, 0x05, // Usage (Touch Pad) 0xA1, 0x01, // Collection (Application) 0x85, 0x0D, // Report ID (13) 0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00) 0x09, 0xC5, // Usage (0xC5) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x04, // Report Count (4) 0xB1, 0x02, // Feature (Data,Var,Abs) 0x85, 0x5D, // Report ID (93) 0x06, 0x00, 0x00, // Usage Page (Undefined) 0x09, 0x01, // Usage (0x01) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x1B, // Report Count (27) 0x81, 0x02, // Input (Data,Var,Abs) 0xC0, // End Collection Below is the KASAN splat after triggering the UAF: [ 21.672709] ================================================================== [ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80 [ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54 [ 21.673700] [ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary) [ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 21.673700] Call Trace: [ 21.673700] <TASK> [ 21.673700] dump_stack_lvl+0x5f/0x80 [ 21.673700] print_report+0xd1/0x660 [ 21.673700] kasan_report+0xe5/0x120 [ 21.673700] __asan_report_store8_noabort+0x1b/0x30 [ 21.673700] asus_probe+0xeeb/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Allocated by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_alloc_info+0x3b/0x50 [ 21.673700] __kasan_kmalloc+0x9c/0xa0 [ 21.673700] __kmalloc_cache_noprof+0x139/0x340 [ 21.673700] input_allocate_device+0x44/0x370 [ 21.673700] hidinput_connect+0xcb6/0x2630 [ 21.673700] hid_connect+0xf74/0x1d60 [ 21.673700] hid_hw_start+0x8c/0x110 [ 21.673700] asus_probe+0x5a3/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Freed by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_free_info+0x3f/0x60 [ 21.673700] __kasan_slab_free+0x3c/0x50 [ 21.673700] kfre ---truncated--- | ||||
| CVE-2025-39823 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: use array_index_nospec with indices that come from guest min and dest_id are guest-controlled indices. Using array_index_nospec() after the bounds checks clamps these values to mitigate speculative execution side-channels. | ||||
| CVE-2025-39817 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: efivarfs: Fix slab-out-of-bounds in efivarfs_d_compare Observed on kernel 6.6 (present on master as well): BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0 Call trace: kasan_check_range+0xe8/0x190 __asan_loadN+0x1c/0x28 memcmp+0x98/0xd0 efivarfs_d_compare+0x68/0xd8 __d_lookup_rcu_op_compare+0x178/0x218 __d_lookup_rcu+0x1f8/0x228 d_alloc_parallel+0x150/0x648 lookup_open.isra.0+0x5f0/0x8d0 open_last_lookups+0x264/0x828 path_openat+0x130/0x3f8 do_filp_open+0x114/0x248 do_sys_openat2+0x340/0x3c0 __arm64_sys_openat+0x120/0x1a0 If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become negative, leadings to oob. The issue can be triggered by parallel lookups using invalid filename: T1 T2 lookup_open ->lookup simple_lookup d_add // invalid dentry is added to hash list lookup_open d_alloc_parallel __d_lookup_rcu __d_lookup_rcu_op_compare hlist_bl_for_each_entry_rcu // invalid dentry can be retrieved ->d_compare efivarfs_d_compare // oob Fix it by checking 'guid' before cmp. | ||||
| CVE-2025-39806 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix slab out-of-bounds access in mt_report_fixup() A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it. Below is the KASAN splat after the out of bounds access happens: [ 13.671954] ================================================================== [ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110 [ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10 [ 13.673297] [ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3 [ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04 [ 13.673297] Call Trace: [ 13.673297] <TASK> [ 13.673297] dump_stack_lvl+0x5f/0x80 [ 13.673297] print_report+0xd1/0x660 [ 13.673297] kasan_report+0xe5/0x120 [ 13.673297] __asan_report_load1_noabort+0x18/0x20 [ 13.673297] mt_report_fixup+0x103/0x110 [ 13.673297] hid_open_report+0x1ef/0x810 [ 13.673297] mt_probe+0x422/0x960 [ 13.673297] hid_device_probe+0x2e2/0x6f0 [ 13.673297] really_probe+0x1c6/0x6b0 [ 13.673297] __driver_probe_device+0x24f/0x310 [ 13.673297] driver_probe_device+0x4e/0x220 [ 13.673297] __device_attach_driver+0x169/0x320 [ 13.673297] bus_for_each_drv+0x11d/0x1b0 [ 13.673297] __device_attach+0x1b8/0x3e0 [ 13.673297] device_initial_probe+0x12/0x20 [ 13.673297] bus_probe_device+0x13d/0x180 [ 13.673297] device_add+0xe3a/0x1670 [ 13.673297] hid_add_device+0x31d/0xa40 [...] | ||||
| CVE-2025-39790 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Detect events pointing to unexpected TREs When a remote device sends a completion event to the host, it contains a pointer to the consumed TRE. The host uses this pointer to process all of the TREs between it and the host's local copy of the ring's read pointer. This works when processing completion for chained transactions, but can lead to nasty results if the device sends an event for a single-element transaction with a read pointer that is multiple elements ahead of the host's read pointer. For instance, if the host accesses an event ring while the device is updating it, the pointer inside of the event might still point to an old TRE. If the host uses the channel's xfer_cb() to directly free the buffer pointed to by the TRE, the buffer will be double-freed. This behavior was observed on an ep that used upstream EP stack without 'commit 6f18d174b73d ("bus: mhi: ep: Update read pointer only after buffer is written")'. Where the device updated the events ring pointer before updating the event contents, so it left a window where the host was able to access the stale data the event pointed to, before the device had the chance to update them. The usual pattern was that the host received an event pointing to a TRE that is not immediately after the last processed one, so it got treated as if it was a chained transaction, processing all of the TREs in between the two read pointers. This commit aims to harden the host by ensuring transactions where the event points to a TRE that isn't local_rp + 1 are chained. [mani: added stable tag and reworded commit message] | ||||
| CVE-2025-39788 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: exynos: Fix programming of HCI_UTRL_NEXUS_TYPE On Google gs101, the number of UTP transfer request slots (nutrs) is 32, and in this case the driver ends up programming the UTRL_NEXUS_TYPE incorrectly as 0. This is because the left hand side of the shift is 1, which is of type int, i.e. 31 bits wide. Shifting by more than that width results in undefined behaviour. Fix this by switching to the BIT() macro, which applies correct type casting as required. This ensures the correct value is written to UTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shift warning: UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21 shift exponent 32 is too large for 32-bit type 'int' For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPE write. | ||||
| CVE-2025-39783 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix configfs group list head handling Doing a list_del() on the epf_group field of struct pci_epf_driver in pci_epf_remove_cfs() is not correct as this field is a list head, not a list entry. This list_del() call triggers a KASAN warning when an endpoint function driver which has a configfs attribute group is torn down: ================================================================== BUG: KASAN: slab-use-after-free in pci_epf_remove_cfs+0x17c/0x198 Write of size 8 at addr ffff00010f4a0d80 by task rmmod/319 CPU: 3 UID: 0 PID: 319 Comm: rmmod Not tainted 6.16.0-rc2 #1 NONE Hardware name: Radxa ROCK 5B (DT) Call trace: show_stack+0x2c/0x84 (C) dump_stack_lvl+0x70/0x98 print_report+0x17c/0x538 kasan_report+0xb8/0x190 __asan_report_store8_noabort+0x20/0x2c pci_epf_remove_cfs+0x17c/0x198 pci_epf_unregister_driver+0x18/0x30 nvmet_pci_epf_cleanup_module+0x24/0x30 [nvmet_pci_epf] __arm64_sys_delete_module+0x264/0x424 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xac/0x230 do_el0_svc+0x40/0x58 el0_svc+0x48/0xdc el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c ... Remove this incorrect list_del() call from pci_epf_remove_cfs(). | ||||
| CVE-2025-39776 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/debug_vm_pgtable: clear page table entries at destroy_args() The mm/debug_vm_pagetable test allocates manually page table entries for the tests it runs, using also its manually allocated mm_struct. That in itself is ok, but when it exits, at destroy_args() it fails to clear those entries with the *_clear functions. The problem is that leaves stale entries. If another process allocates an mm_struct with a pgd at the same address, it may end up running into the stale entry. This is happening in practice on a debug kernel with CONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extra debugging I added (it prints a warning trace if pgtables_bytes goes negative, in addition to the warning at check_mm() function): [ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000 [ 2.539366] kmem_cache info [ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508 [ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e (...) [ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0 [ 2.552816] Modules linked in: [ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY [ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries [ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90 [ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug) [ 2.552899] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 0000000a [ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0 [ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001 [ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff [ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000 [ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb [ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0 [ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000 [ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001 [ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760 [ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0 [ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0 [ 2.553199] Call Trace: [ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable) [ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0 [ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570 [ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650 [ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290 [ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0 [ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870 [ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150 [ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50 [ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0 [ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec (...) [ 2.558892] ---[ end trace 0000000000000000 ]--- [ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1 [ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144 Here the modprobe process ended up with an allocated mm_struct from the mm_struct slab that was used before by the debug_vm_pgtable test. That is not a problem, since the mm_stru ---truncated--- | ||||
| CVE-2025-39766 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Make cake_enqueue return NET_XMIT_CN when past buffer_limit The following setup can trigger a WARNING in htb_activate due to the condition: !cl->leaf.q->q.qlen tc qdisc del dev lo root tc qdisc add dev lo root handle 1: htb default 1 tc class add dev lo parent 1: classid 1:1 \ htb rate 64bit tc qdisc add dev lo parent 1:1 handle f: \ cake memlimit 1b ping -I lo -f -c1 -s64 -W0.001 127.0.0.1 This is because the low memlimit leads to a low buffer_limit, which causes packet dropping. However, cake_enqueue still returns NET_XMIT_SUCCESS, causing htb_enqueue to call htb_activate with an empty child qdisc. We should return NET_XMIT_CN when packets are dropped from the same tin and flow. I do not believe return value of NET_XMIT_CN is necessary for packet drops in the case of ack filtering, as that is meant to optimize performance, not to signal congestion. | ||||
| CVE-2025-39760 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: core: config: Prevent OOB read in SS endpoint companion parsing usb_parse_ss_endpoint_companion() checks descriptor type before length, enabling a potentially odd read outside of the buffer size. Fix this up by checking the size first before looking at any of the fields in the descriptor. | ||||
| CVE-2025-39759 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix race between quota disable and quota rescan ioctl There's a race between a task disabling quotas and another running the rescan ioctl that can result in a use-after-free of qgroup records from the fs_info->qgroup_tree rbtree. This happens as follows: 1) Task A enters btrfs_ioctl_quota_rescan() -> btrfs_qgroup_rescan(); 2) Task B enters btrfs_quota_disable() and calls btrfs_qgroup_wait_for_completion(), which does nothing because at that point fs_info->qgroup_rescan_running is false (it wasn't set yet by task A); 3) Task B calls btrfs_free_qgroup_config() which starts freeing qgroups from fs_info->qgroup_tree without taking the lock fs_info->qgroup_lock; 4) Task A enters qgroup_rescan_zero_tracking() which starts iterating the fs_info->qgroup_tree tree while holding fs_info->qgroup_lock, but task B is freeing qgroup records from that tree without holding the lock, resulting in a use-after-free. Fix this by taking fs_info->qgroup_lock at btrfs_free_qgroup_config(). Also at btrfs_qgroup_rescan() don't start the rescan worker if quotas were already disabled. | ||||
| CVE-2025-39757 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Validate UAC3 cluster segment descriptors UAC3 class segment descriptors need to be verified whether their sizes match with the declared lengths and whether they fit with the allocated buffer sizes, too. Otherwise malicious firmware may lead to the unexpected OOB accesses. | ||||
| CVE-2025-39749 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rcu: Protect ->defer_qs_iw_pending from data race On kernels built with CONFIG_IRQ_WORK=y, when rcu_read_unlock() is invoked within an interrupts-disabled region of code [1], it will invoke rcu_read_unlock_special(), which uses an irq-work handler to force the system to notice when the RCU read-side critical section actually ends. That end won't happen until interrupts are enabled at the soonest. In some kernels, such as those booted with rcutree.use_softirq=y, the irq-work handler is used unconditionally. The per-CPU rcu_data structure's ->defer_qs_iw_pending field is updated by the irq-work handler and is both read and updated by rcu_read_unlock_special(). This resulted in the following KCSAN splat: ------------------------------------------------------------------------ BUG: KCSAN: data-race in rcu_preempt_deferred_qs_handler / rcu_read_unlock_special read to 0xffff96b95f42d8d8 of 1 bytes by task 90 on cpu 8: rcu_read_unlock_special+0x175/0x260 __rcu_read_unlock+0x92/0xa0 rt_spin_unlock+0x9b/0xc0 __local_bh_enable+0x10d/0x170 __local_bh_enable_ip+0xfb/0x150 rcu_do_batch+0x595/0xc40 rcu_cpu_kthread+0x4e9/0x830 smpboot_thread_fn+0x24d/0x3b0 kthread+0x3bd/0x410 ret_from_fork+0x35/0x40 ret_from_fork_asm+0x1a/0x30 write to 0xffff96b95f42d8d8 of 1 bytes by task 88 on cpu 8: rcu_preempt_deferred_qs_handler+0x1e/0x30 irq_work_single+0xaf/0x160 run_irq_workd+0x91/0xc0 smpboot_thread_fn+0x24d/0x3b0 kthread+0x3bd/0x410 ret_from_fork+0x35/0x40 ret_from_fork_asm+0x1a/0x30 no locks held by irq_work/8/88. irq event stamp: 200272 hardirqs last enabled at (200272): [<ffffffffb0f56121>] finish_task_switch+0x131/0x320 hardirqs last disabled at (200271): [<ffffffffb25c7859>] __schedule+0x129/0xd70 softirqs last enabled at (0): [<ffffffffb0ee093f>] copy_process+0x4df/0x1cc0 softirqs last disabled at (0): [<0000000000000000>] 0x0 ------------------------------------------------------------------------ The problem is that irq-work handlers run with interrupts enabled, which means that rcu_preempt_deferred_qs_handler() could be interrupted, and that interrupt handler might contain an RCU read-side critical section, which might invoke rcu_read_unlock_special(). In the strict KCSAN mode of operation used by RCU, this constitutes a data race on the ->defer_qs_iw_pending field. This commit therefore disables interrupts across the portion of the rcu_preempt_deferred_qs_handler() that updates the ->defer_qs_iw_pending field. This suffices because this handler is not a fast path. | ||||
| CVE-2025-39743 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: truncate good inode pages when hard link is 0 The fileset value of the inode copy from the disk by the reproducer is AGGR_RESERVED_I. When executing evict, its hard link number is 0, so its inode pages are not truncated. This causes the bugon to be triggered when executing clear_inode() because nrpages is greater than 0. | ||||
| CVE-2025-39738 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not allow relocation of partially dropped subvolumes [BUG] There is an internal report that balance triggered transaction abort, with the following call trace: item 85 key (594509824 169 0) itemoff 12599 itemsize 33 extent refs 1 gen 197740 flags 2 ref#0: tree block backref root 7 item 86 key (594558976 169 0) itemoff 12566 itemsize 33 extent refs 1 gen 197522 flags 2 ref#0: tree block backref root 7 ... BTRFS error (device loop0): extent item not found for insert, bytenr 594526208 num_bytes 16384 parent 449921024 root_objectid 934 owner 1 offset 0 BTRFS error (device loop0): failed to run delayed ref for logical 594526208 num_bytes 16384 type 182 action 1 ref_mod 1: -117 ------------[ cut here ]------------ BTRFS: Transaction aborted (error -117) WARNING: CPU: 1 PID: 6963 at ../fs/btrfs/extent-tree.c:2168 btrfs_run_delayed_refs+0xfa/0x110 [btrfs] And btrfs check doesn't report anything wrong related to the extent tree. [CAUSE] The cause is a little complex, firstly the extent tree indeed doesn't have the backref for 594526208. The extent tree only have the following two backrefs around that bytenr on-disk: item 65 key (594509824 METADATA_ITEM 0) itemoff 13880 itemsize 33 refs 1 gen 197740 flags TREE_BLOCK tree block skinny level 0 (176 0x7) tree block backref root CSUM_TREE item 66 key (594558976 METADATA_ITEM 0) itemoff 13847 itemsize 33 refs 1 gen 197522 flags TREE_BLOCK tree block skinny level 0 (176 0x7) tree block backref root CSUM_TREE But the such missing backref item is not an corruption on disk, as the offending delayed ref belongs to subvolume 934, and that subvolume is being dropped: item 0 key (934 ROOT_ITEM 198229) itemoff 15844 itemsize 439 generation 198229 root_dirid 256 bytenr 10741039104 byte_limit 0 bytes_used 345571328 last_snapshot 198229 flags 0x1000000000001(RDONLY) refs 0 drop_progress key (206324 EXTENT_DATA 2711650304) drop_level 2 level 2 generation_v2 198229 And that offending tree block 594526208 is inside the dropped range of that subvolume. That explains why there is no backref item for that bytenr and why btrfs check is not reporting anything wrong. But this also shows another problem, as btrfs will do all the orphan subvolume cleanup at a read-write mount. So half-dropped subvolume should not exist after an RW mount, and balance itself is also exclusive to subvolume cleanup, meaning we shouldn't hit a subvolume half-dropped during relocation. The root cause is, there is no orphan item for this subvolume. In fact there are 5 subvolumes from around 2021 that have the same problem. It looks like the original report has some older kernels running, and caused those zombie subvolumes. Thankfully upstream commit 8d488a8c7ba2 ("btrfs: fix subvolume/snapshot deletion not triggered on mount") has long fixed the bug. [ENHANCEMENT] For repairing such old fs, btrfs-progs will be enhanced. Considering how delayed the problem will show up (at run delayed ref time) and at that time we have to abort transaction already, it is too late. Instead here we reject any half-dropped subvolume for reloc tree at the earliest time, preventing confusion and extra time wasted on debugging similar bugs. | ||||
| CVE-2025-39719 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: bno055: fix OOB access of hw_xlate array Fix a potential out-of-bounds array access of the hw_xlate array in bno055.c. In bno055_get_regmask(), hw_xlate was iterated over the length of the vals array instead of the length of the hw_xlate array. In the case of bno055_gyr_scale, the vals array is larger than the hw_xlate array, so this could result in an out-of-bounds access. In practice, this shouldn't happen though because a match should always be found which breaks out of the for loop before it iterates beyond the end of the hw_xlate array. By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be sure we are iterating over the correct length. | ||||