Export limit exceeded: 18983 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 361554 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (361554 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53215 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: refill RX buffers before XDP or skb use The RX error path returns the current descriptor buffer to the hardware BM pool. That is only valid while the driver still owns the buffer. mvpp2_rx_refill() can fail after the current buffer has been handed to XDP or attached to an skb. In those cases mvpp2_run_xdp() may have recycled, redirected, or queued the page for XDP_TX, and an skb free also retires the data buffer. Returning such a buffer to BM lets hardware DMA into memory that is no longer owned by the RX ring. Refill the BM pool before handing the current buffer to XDP or to the skb. If the allocation fails there, drop the packet and return the still-owned current buffer to BM, preserving the pool depth. Once the refill succeeds, later local drops retire/free the current buffer instead of returning it to BM. | ||||
| CVE-2026-53212 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_tunnel: fix use-after-free on object destroy nft_tunnel_obj_destroy() calls metadata_dst_free() which directly kfree()s the metadata_dst, ignoring the dst_entry refcount. Packets that took a reference via dst_hold() in nft_tunnel_obj_eval() and are still queued (e.g. in a netem qdisc) are left with a dangling pointer. When these packets are eventually dequeued, dst_release() operates on freed memory. Replace metadata_dst_free() with dst_release() so the metadata_dst is freed only after all references are dropped. The dst subsystem already handles metadata_dst cleanup in dst_destroy() when DST_METADATA is set. | ||||
| CVE-2026-53205 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add bounds checks for firmware log indices Add validation that read and write indices in the firmware log buffer are within valid bounds (< data_size) before using them. If out-of-bounds indices are encountered (from firmware), clamp them to safe values instead of proceeding with invalid offsets. This prevents potential out-of-bounds buffer access when firmware supplies invalid log indices. | ||||
| CVE-2026-53200 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix handling of XN[0] when !FEAT_XNX XN has already been extracted from its bitfield position so using FIELD_PREP() on the mask that clears XN[0] is completely broken, having the effect of unconditionally granting execute permissions... Fix the obvious mistake by manipulating the right bit. | ||||
| CVE-2026-53198 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL A deferred byte-range lock (an SMB2_LOCK that blocks) registers an async work on conn->async_requests via setup_async_work(), with cancel_fn = smb2_remove_blocked_lock and cancel_argv[0] pointing at the struct file_lock. When the request is cancelled, the worker frees the file_lock with locks_free_lock() and takes the cancelled early-exit, which "goto out"s and never reaches release_async_work() -- the only site that unlinks the work from conn->async_requests and clears cancel_fn/cancel_argv. The work therefore stays matchable on async_requests with a live cancel_fn pointing at the freed file_lock, until connection teardown finally runs release_async_work(). smb2_cancel() fires cancel_fn unconditionally with no state guard, so a second SMB2_CANCEL for the same AsyncId, arriving in that window, re-runs smb2_remove_blocked_lock() on the freed file_lock -- a slab use-after-free: BUG: KASAN: slab-use-after-free in __locks_delete_block __locks_delete_block locks_delete_block ksmbd_vfs_posix_lock_unblock smb2_remove_blocked_lock smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn handle_ksmbd_work Allocated by ...: locks_alloc_lock <- smb2_lock Freed by ...: locks_free_lock <- smb2_lock (cancelled branch) ... cache file_lock_cache of size 192 Reproduced on mainline with KASAN by an authenticated SMB client. Skip a work whose state is already KSMBD_WORK_CANCELLED so its cancel callback cannot be fired a second time. | ||||
| CVE-2026-53194 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: kl5kusb105: fix bulk-out buffer overflow klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied. | ||||
| CVE-2026-53193 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Forcibly close timer instances at closing When snd_timer object is freed via snd_timer_free() and still pending snd_timer_instance objects are assigned to the timer object, it tries to unlink all instances and just set NULL to each ti->timer, then releases the resources immediately. The problem is, however, when there are slave timer instances that are associated with a master instance linked to this timer: namely, those slave instances still point to the freed timer object although the master instance is unlinked, which may lead to user-after-free. The bug can be easily triggered particularly when a new userspace-driven timers (CONFIG_SND_UTIMER) is involved, since it can create and delete the timer object via a simple file open/close, while the other applications may keep accessing to that timer. This patch is an attempt to paper over the problem above: now instead of just unlinking, call snd_timer_close[_locked]() forcibly for each pending timer instance, so that all assigned slave timer instances are properly detached, too. Since snd_timer_close() might be called later by the driver that created that instance, the check of SNDRV_TIMER_IFLG_DEAD is added at the beginning, too. | ||||
| CVE-2026-53192 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Fix UAF at snd_timer_user_params() At releasing a timer object, e.g. when a userspace timer (CONFIG_SND_UTIMER) gets closed and snd_timer_free() is called, it tries to detach the timer instances and release the resources. However, it's still possible that other in-flight tasks are holding the timer instance where the to-be-deleted timer object is associated, and this may lead to racy accesses. Fortunately, most of ioctls dealing with the timer instance list already have the protection with register_mutex, and this also avoids such races. But, SNDRV_TIMER_IOCTL_PARAMS isn't protected, hence the concurrent ioctl may lead to use-after-free. This patch just adds the guard with register_mutex to protect snd_timer_user_params() for covering the code path as a quick workaround. It's no hot-path but rather a rarely issued ioctl, so the performance penalty doesn't matter. | ||||
| CVE-2026-53191 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/net: inherit IORING_CQE_F_BUF_MORE across bundle recv retries When a bundle recv retries inside io_recv_finish(), the merge logic OR the saved cflags from the previous iteration with the cflags returned by the new iteration: cflags = req->cqe.flags | (cflags & CQE_F_MASK); Bits listed in CQE_F_MASK are inherited from the new iteration, and all other bits (notably IORING_CQE_F_BUFFER and the buffer ID) come from the saved cflags. Before this change CQE_F_MASK covered only IORING_CQE_F_SOCK_NONEMPTY and IORING_CQE_F_MORE. When using provided buffer rings (IOU_PBUF_RING_INC) with incremental mode, and bundle recv, io_kbuf_inc_commit() can leave the head ring entry partially consumed, __io_put_kbufs() then sets IORING_CQE_F_BUF_MORE on the returned cflags so userspace knows the buffer ID will be reused for subsequent completions. Because IORING_CQE_F_BUF_MORE was not in CQE_F_MASK, the merge above silently dropped it whenever the final retry iteration partially consumed the buffer, and the subsequent req->cqe.flags = cflags & ~CQE_F_MASK save would have left a stale IORING_CQE_F_BUF_MORE in the carried-over cflags had one been present. Userspace would then wrongfully advance it ring head past an entry the kernel still uses. Add IORING_CQE_F_BUF_MORE to CQE_F_MASK so it is both inherited from the new iteration into the user-visible CQE and stripped from the saved cflags between iterations. | ||||
| CVE-2026-53189 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: update file PMD counter before folio_put() __split_huge_pmd_locked() updates the file/shmem RSS counter after dropping the PMD mapping's folio reference. If folio_put() drops the last reference, mm_counter_file() can later read freed folio state via folio_test_swapbacked(). Move the counter update before folio_put(). | ||||
| CVE-2026-53188 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Validate the passed in fops for ib_get_ucaps() Sashiko pointed out it is not safe to rely only on the devt because char/block alias so if the user finds a block device with the same dev_t it can masquerade as a ucap cdev fd. Test the f_ops to only accept authentic cdevs. | ||||
| CVE-2026-53187 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc The cpu_id attribute supplied by user space through UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu() without first verifying that the value is within the valid CPU range. Passing such untrusted data to cpumask_test_cpu() may lead to an out-of-bounds read of the underlying cpumask bitmap: the helper expands to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with no bound check. In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this turns a bad user input into a machine reboot. Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL before it is used. Reported by Smatch. | ||||
| CVE-2026-53186 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: bound SRP_RSP sense copy by the received length srp_process_rsp() copies sense data from rsp->data + resp_data_len, where resp_data_len is the full 32-bit value supplied by the SRP target and is never checked against the number of bytes actually received (wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, so at most 96 bytes are copied, but the source offset is not bounded. A malicious or compromised SRP target on the InfiniBand/RoCE fabric that the initiator has logged into can return an SRP_RSP with SRP_RSP_FLAG_SNSVALID set and a large resp_data_len. The receive buffer is allocated at the target-chosen max_ti_iu_len, so the source of the sense copy lands past the bytes actually received; with resp_data_len near 0xFFFFFFFF it is gigabytes past the buffer and the read faults. Copy the sense data only if it has not been truncated, that is, only if the response header, the response data, and the sense region fit within the bytes actually received; otherwise drop the sense and log. The in-tree iSER and NVMe-RDMA receive paths already bound their parse by wc->byte_len; this brings ib_srp into line with them. | ||||
| CVE-2026-53185 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: zram: fix use-after-free in zram_bvec_write_partial() zram_read_page() picks the sync or async backing device read path based on whether the parent bio is NULL. zram_bvec_write_partial() passes its parent bio down, so for ZRAM_WB slots the read is dispatched asynchronously and zram_read_page() returns 0 while the bio is still in flight. The caller then runs memcpy_from_bvec(), zram_write_page() and __free_page() on the buffer, leaving the async read to write into a freed page. zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d ("zram: fix synchronous reads") for the same reason; the write_partial counterpart was missed. | ||||
| CVE-2026-53184 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: udp: clear skb->dev before running a sockmap verdict On the UDP receive path skb->dev is repurposed as dev_scratch (the truesize/state cache set by udp_set_dev_scratch()), through the union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff. When a UDP socket is in a sockmap, sk_data_ready is sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor() (sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq. If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp, bpf_skc_lookup_tcp), bpf_skc_lookup() does: if (skb->dev) caller_net = dev_net(skb->dev); skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net() dereferences it as a struct net_device * and the kernel takes a general protection fault on a non-canonical address in softirq: Oops: general protection fault, probably for non-canonical address 0x1010000800004a0 CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full) RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline] RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047 Call Trace: <IRQ> bpf_prog_4675cb904b7071f8+0x12e/0x14e bpf_prog_run_pin_on_cpu+0xc6/0x1f0 sk_psock_verdict_recv+0x1ba/0x350 udp_read_skb+0x31a/0x370 sk_psock_verdict_data_ready+0x2e3/0x600 __udp_enqueue_schedule_skb+0x4c8/0x650 udpv6_queue_rcv_one_skb+0x3ec/0x740 udp6_unicast_rcv_skb+0x11d/0x140 ip6_protocol_deliver_rcu+0x61e/0x950 ip6_input_finish+0xa9/0x150 NF_HOOK+0x286/0x2f0 ip6_input+0x117/0x220 NF_HOOK+0x286/0x2f0 __netif_receive_skb+0x85/0x200 process_backlog+0x374/0x9a0 __napi_poll+0x4f/0x1c0 net_rx_action+0x3b0/0x770 handle_softirqs+0x15a/0x460 do_softirq+0x57/0x80 </IRQ> The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which skb_set_owner_sk_safe() set just above. | ||||
| CVE-2026-53183 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: allow subflow rcv wnd to shrink In MPTCP connection, the `window` field in the TCP header refers to the MPTCP-level rcv_nxt and it's right edge should not move backward. Such constraint is enforced at DSS option generation time. At the same time, the TCP stack ensures independently that the TCP-level rcv wnd right's edge does not move backward. That in turn causes artificial inflating of the MPTCP rcv window when the incoming data is acked at the TCP level and is OoO in the MPTCP sequence space (or lands in the backlog). As a consequence, the incoming traffic can exceed the receiver rcvbuf size even when the sender is not misbehaving. Prevent such scenario forcibly allowing the TCP subflow to shrink the TCP-level rcv wnd regardless of the current netns setting. | ||||
| CVE-2026-53180 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: timers/migration: Fix livelock in tmigr_handle_remote_up() tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu == smp_processor_id(), assuming the local softirq path already handled this CPU's timers. This assumption is wrong because jiffies can advance after the handling of the CPU's global timers in run_timer_base(BASE_GLOBAL) and before tmigr_handle_remote() evaluates the expiry times. As a consequence a timer which expires after the CPU local timer wheel advanced and becomes expired in the remote handling is ignored and the callback is never invoked and removed from the timer wheel. What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it as expired, and the event is re-queued with expires == now on each iteration. The goto-again loop spins indefinitely. Fix this by calling timer_expire_remote() unconditionally. That's minimal overhead for the common case as __run_timer_base() returns immediately if there is nothing to expire in the local wheel. [ tglx: Amend change log and add a comment ] | ||||
| CVE-2026-53178 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction Add guards to ensure ie_length is large enough before subtracting fixed IE offsets to prevent unsigned integer underflow. | ||||
| CVE-2026-53176 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done() computes the login request payload length as wc->byte_len minus ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int. A remote iSER initiator can post a login Send work request carrying fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows and login_req_len becomes negative. isert_rx_login_req() then reads that negative length back into a signed int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the min() is signed it keeps the negative value; the value is then passed as the memcpy() length and sign-extended to a multi-gigabyte size_t. The copy into the 8192-byte login->req_buf runs far out of bounds and faults, crashing the target node. The login phase precedes iSCSI authentication, so no credentials are required to reach this path. Reject any login PDU shorter than ISER_HEADERS_LEN before the subtraction, mirroring the existing early return on a failed work completion, so login_req_len can never go negative. The upper bound was already safe: a posted login buffer cannot deliver more than ISER_RX_PAYLOAD_SIZE, so the difference stays at or below MAX_KEY_VALUE_PAIRS and the existing min() clamps it; only the missing lower bound needs to be added. | ||||
| CVE-2026-53174 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ovl: keep err zero after successful ovl_cache_get() ovl_iterate_merged() stores PTR_ERR(cache) in err before checking IS_ERR(cache). On success err holds the truncated cache pointer and can be returned as a bogus non-zero error. The syzbot reproducer reaches this through overlay-on-overlay readdir: getdents64 iterate_dir(outer overlay file) ovl_iterate_merged() ovl_cache_get() ovl_dir_read_merged() ovl_dir_read() iterate_dir(inner overlay file) ovl_iterate_merged() Only compute PTR_ERR(cache) on the error path. | ||||