Export limit exceeded: 20094 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20094 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-52957 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential null-ptr-deref in decode_choose_args() A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an array of max_buckets CRUSH buckets is decoded, where some indices may not refer to actual buckets and are therefore set to NULL. The received CRUSH map may optionally contain choose_args that get decoded in decode_choose_args(). When decoding a crush_choose_arg_map, a series of choose_args for different buckets is decoded, with the bucket_index being read from the incoming message. It is only checked that the bucket index does not exceed max_buckets, but not that it doesn't point to an index with a NULL bucket. If a (potentially corrupted) message contains a crush_choose_arg_map including such a bucket_index, a null pointer dereference may occur in the subsequent processing when attempting to access the bucket with the given index. This patch fixes the issue by extending the affected check. Now, it is only attempted to access the bucket if it is not NULL. | ||||
| CVE-2026-52956 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in __ceph_x_decrypt() In __ceph_x_decrypt(), a part of the buffer p is interpreted as a ceph_x_encrypt_header, and the magic field of this struct is accessed. This happens without any guarantee that the buffer is large enough to hold this struct. The function parameter ciphertext_len represents the length of the ciphertext to decrypt and is guaranteed to be at most the remaining size of the allocated buffer p. However, this value is not necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold the ciphertext at its end with a ciphertext_len of 8 or less, can trigger an out-of-bounds memory access when accessing hdr->magic. This patch fixes the issue by adding a check to ensure that the decrypted plaintext in the buffer is large enough to represent at least the ceph_x_encrypt_header. | ||||
| CVE-2026-52955 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in crush_decode() A message of type CEPH_MSG_OSD_MAP containing a crush map with at least one bucket has two fields holding the bucket algorithm. If the values in these two fields differ, an out-of-bounds access can occur. This is the case because the first algorithm field (alg) is used to allocate the correct amount of memory for a bucket of this type, while the second algorithm field inside the bucket (b->alg) is used in the subsequent processing. This patch fixes the issue by adding a check that compares alg and b->alg and aborts the processing in case they differ. Furthermore, b->alg is set to 0 in this case, because the destruction of the crush map also uses this field to determine the bucket type, which can again result in an out-of-bounds access when trying to free the memory pointed to by the fields of the bucket. To correctly free the memory allocated for the bucket in such a case, the corresponding call to kfree is moved from the algorithm-specific crush_destroy_bucket functions to the generic crush_destroy_bucket(). | ||||
| CVE-2026-52953 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix oops due to out of scope access Below oops triggers when kill QEMU process: Oops: general protection fault, probably for non-canonical address 0x7fffffff844eaaa7: 0000 [#1] SMP NOPTI Call Trace: <TASK> do_raw_spin_lock+0xaa/0xc0 _raw_spin_lock_irqsave+0x21/0x40 domain_remove_dev_pasid+0x52/0x160 intel_nested_set_dev_pasid+0x1b9/0x1e0 __iommu_set_group_pasid+0x56/0x120 pci_dev_reset_iommu_done+0xe3/0x180 pcie_flr+0x65/0x160 __pci_reset_function_locked+0x5b/0x120 vfio_pci_core_close_device+0x63/0xe0 [vfio_pci_core] vfio_df_close+0x4f/0xa0 vfio_df_unbind_iommufd+0x2d/0x60 vfio_device_fops_release+0x3e/0x40 __fput+0xe5/0x2c0 task_work_run+0x58/0xa0 do_exit+0x2c8/0x600 do_group_exit+0x2f/0xa0 get_signal+0x863/0x8c0 arch_do_signal_or_restart+0x24/0x100 exit_to_user_mode_loop+0x87/0x380 do_syscall_64+0x2ff/0x11e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The global static blocked domain is a dummy domain without corresponding dmar_domain structure, accessing beyond iommu_domain structure triggers oops easily. Fix it by return early in domain_remove_dev_pasid() like identity domain. | ||||
| CVE-2026-52952 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset In __iommu_group_set_domain_internal(), concurrent domain attachments are rejected when any device in the group is recovering. This is necessary to fence concurrent attachments to a multi-device group where devices might share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in __iommu_group_set_domain_nofail(). Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should not be rejected, as the domain would be freed anyway in these nofail paths while group->domain is still pointing to it. So pci_dev_reset_iommu_done() could trigger a UAF when re-attaching group->domain. Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through the group->recovery_cnt fence, so as to update the group->domain pointer. Instead add a gdev->blocked check in the device iteration loop, to prevent any concurrent per-device detachment. | ||||
| CVE-2026-52951 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: handle empty bo and UAF races There look to be some nasty races here when triggering the invalidate_mappings hook: 1) We do xe_bo_alloc() followed by the attach, before the actual full bo init step in xe_dma_buf_init_obj(). However the bo is visible on the attachments list after the attach. This is bad since exporter driver, say amdgpu, can at any time call back into our invalidate_mappings hook, with an empty/bogus bo, leading to potential bugs/crashes. 2) Similar to 1) but here we get a UAF, when the invalidate_mappings hook is triggered. For example, we get as far as xe_bo_init_locked() but this fails in some way. But here the bo will be freed on error, but we still have it attached from dma-buf pov, so if the invalidate_mappings is now triggered then the bo we access is gone and we trigger UAF and more bugs/crashes. To fix this, move the attach step until after we actually have a fully set up buffer object. Note that the bo is not published to userspace until later, so not sure what the comment "Don't publish the bo until we have a valid attachment", is referring to. We have at least two different customers reporting hitting a NULL ptr deref in evict_flags when importing something from amdgpu, followed by triggering the evict flow. Hit rate is also pretty low, which would hint at some kind of race, so something like 1) or 2) might explain this. v2: - Shuffle the order of the ops slightly (no functional change) - Improve the comment to better explain the ordering (Matt B) (cherry picked from commit af1f2ad0c59fe4e2f924c526f66e968289d77971) | ||||
| CVE-2026-52950 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: fix UAF with retry loop Retry doesn't work here, since bo will be freed on error, leading to UAF. However, now that we do the alloc & init before the attach, we can now combine this as one unit and have the init do the alloc for us. This should make the retry safe. Reported by Sashiko. v2: Fix up the error unwind (CI) (cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7) | ||||
| CVE-2026-52947 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix refcount saturation and potential UAF in qrtr_port_remove In qrtr_port_remove(), the socket reference count is decremented via __sock_put() before the port is removed from the qrtr_ports XArray and before the RCU grace period elapses. This breaks the fundamental RCU update paradigm. It exposes a race window where a concurrent RCU reader (such as qrtr_reset_ports() or qrtr_port_lookup()) can obtain a pointer to the socket from the XArray, and attempt to call sock_hold() on a socket whose reference count has already dropped to zero. This exact race condition was hit during syzkaller fuzzing, leading to the following refcount saturation warning and a potential Use-After-Free: refcount_t: saturated; leaking memory. WARNING: CPU: 3 PID: 1273 at lib/refcount.c:22 refcount_warn_saturate+0xae/0x1d0 Modules linked in: qrtr(+) bochs drm_shmem_helper ... Call Trace: <TASK> qrtr_reset_ports net/qrtr/af_qrtr.c:768 [inline] [qrtr] __qrtr_bind.isra.0+0x48b/0x570 net/qrtr/af_qrtr.c:805 [qrtr] qrtr_bind+0x17d/0x210 net/qrtr/af_qrtr.c:901 [qrtr] kernel_bind+0xe4/0x120 net/socket.c:3592 qrtr_ns_init+0x1a6/0x380 net/qrtr/ns.c:715 [qrtr] qrtr_proto_init+0x3b/0xff0 net/qrtr/af_qrtr.c:169 [qrtr] do_one_initcall+0xf5/0x5e0 init/main.c:1283 ... </TASK> Fix this by deferring the reference count decrement until after the xa_erase() and the synchronize_rcu() complete. (Note: The v1 of this patch incorrectly replaced __sock_put() with sock_put(). As Simon Horman pointed out, the callers of qrtr_port_remove() still hold a reference to the socket, so freeing the socket memory here would lead to a subsequent UAF in the caller. Thus, the __sock_put() is kept, but only repositioned to close the RCU race.) | ||||
| CVE-2026-52945 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "wireguard: device: enable threaded NAPI" This reverts commit 933466fc50a8e4eb167acbd0d8ec96a078462e9c which is commit db9ae3b6b43c79b1ba87eea849fd65efa05b4b2e upstream. We have had three independent production user reports in combination with Cilium utilizing WireGuard as encryption underneath that k8s Pod E/W traffic to certain peer nodes fully stalled. The situation appears as follows: - Occurs very rarely but at random times under heavy networking load. - Once the issue triggers the decryption side stops working completely for that WireGuard peer, other peers keep working fine. The stall happens also for newly initiated connections towards that particular WireGuard peer. - Only the decryption side is affected, never the encryption side. - Once it triggers, it never recovers and remains in this state, the CPU/mem on that node looks normal, no leak, busy loop or crash. - bpftrace on the affected system shows that wg_prev_queue_enqueue fails, thus the MAX_QUEUED_PACKETS (1024 skbs!) for the peer's rx_queue is reached. - Also, bpftrace shows that wg_packet_rx_poll for that peer is never called again after reaching this state for that peer. For other peers wg_packet_rx_poll does get called normally. - Commit db9ae3b ("wireguard: device: enable threaded NAPI") switched WireGuard to threaded NAPI by default. The default has not been changed for triggering the issue, neither did CPU hotplugging occur (i.e. 5bd8de2 ("wireguard: queueing: always return valid online CPU in wg_cpumask_choose_online()")). - The issue has been observed with stable kernels of v5.15 as well as v6.1. It was reported to us that v5.10 stable is working fine, and no report on v6.6 stable either (somewhat related discussion in [0] though). - In the WireGuard driver the only material difference between v5.10 stable and v5.15 stable is the switch to threaded NAPI by default. [0] https://lore.kernel.org/netdev/CA+wXwBTT74RErDGAnj98PqS=wvdh8eM1pi4q6tTdExtjnokKqA@mail.gmail.com/ Breakdown of the problem: 1) skbs arriving for decryption are enqueued to the peer->rx_queue in wg_packet_consume_data via wg_queue_enqueue_per_device_and_peer. 2) The latter only moves the skb into the MPSC peer queue if it does not surpass MAX_QUEUED_PACKETS (1024) which is kept track in an atomic counter via wg_prev_queue_enqueue. 3) In case enqueueing was successful, the skb is also queued up in the device queue, round-robin picks a next online CPU, and schedules the decryption worker. 4) The wg_packet_decrypt_worker, once scheduled, picks these up from the queue, decrypts the packets and once done calls into wg_queue_enqueue_per_peer_rx. 5) The latter updates the state to PACKET_STATE_CRYPTED on success and calls napi_schedule on the per peer->napi instance. 6) NAPI then polls via wg_packet_rx_poll. wg_prev_queue_peek checks on the peer->rx_queue. It will wg_prev_queue_dequeue if the queue->peeked skb was not cached yet, or just return the latter otherwise. (wg_prev_queue_drop_peeked later clears the cache.) 7) From an ordering perspective, the peer->rx_queue has skbs in order while the device queue with the per-CPU worker threads from a global ordering PoV can finish the decryption and signal the skb PACKET_STATE_CRYPTED out of order. 8) A situation can be observed that the first packet coming in will be stuck waiting for the decryption worker to be scheduled for a longer time when the system is under pressure. 9) While this is the case, the other CPUs in the meantime finish decryption and call into napi_schedule. 10) Now in wg_packet_rx_poll it picks up the first in-order skb from the peer->rx_queue and sees that its state is still PACKET_STATE_UNCRYPTED. The NAPI poll routine then exits e ---truncated--- | ||||
| CVE-2026-52943 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix missing zerocopy reference in pskb_carve helpers pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy the old skb_shared_info header into a new buffer via memcpy(), which includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs. Neither function calls net_zcopy_get() for the new shinfo, creating an unaccounted holder: every skb_shared_info with destructor_arg set will call skb_zcopy_clear() once when freed, but the corresponding net_zcopy_get() was never called for the new copy. Repeated calls drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while TX skbs still hold live destructor_arg pointers. KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530 The skb consuming the late access still referenced the same uarg via shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without a refcount bump. This has been verified to be reliably exploitable: a working proof-of-concept achieves full root privilege escalation from an unprivileged local user on a default kernel configuration. The fix follows the pattern of pskb_expand_head() which has the same memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get() is placed after skb_orphan_frags() succeeds, so the orphan error path needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is placed after all failure points and just before skb_release_data(), so no error path needs cleanup at all -- matching pskb_expand_head() more closely and avoiding the need for a balancing net_zcopy_put(). | ||||
| CVE-2026-52942 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_log: validate MAC header was set before dumping it The fallback path of dump_mac_header() guards the MAC header access only with "skb->mac_header != skb->network_header", without checking skb_mac_header_was_set(). When the MAC header is unset, mac_header is 0xffff, so the test passes and skb_mac_header(skb) returns skb->head + 0xffff, ~64 KiB past the buffer; the loop then reads dev->hard_header_len bytes out of bounds into the kernel log. This is reachable via the netdev logger: nf_log_unknown_packet() calls dump_mac_header() unconditionally, and an skb sent through AF_PACKET with PACKET_QDISC_BYPASS reaches the egress hook with mac_header still unset (__dev_queue_xmit(), which would reset it, is bypassed). Add the skb_mac_header_was_set() check the ARPHRD_ETHER path already uses, and replace the open-coded MAC header length test with skb_mac_header_len(). Only skbs with an unset MAC header are affected; valid ones are dumped as before. BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831) Read of size 1 at addr ffff88800ea49d3f by task exploit/148 Call Trace: kasan_report (mm/kasan/report.c:595) dump_mac_header (net/netfilter/nf_log_syslog.c:831) nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963) nf_log_packet (net/netfilter/nf_log.c:260) nft_log_eval (net/netfilter/nft_log.c:60) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307) nf_hook_slow (net/netfilter/core.c:619) nf_hook_direct_egress (net/packet/af_packet.c:257) packet_xmit (net/packet/af_packet.c:280) packet_sendmsg (net/packet/af_packet.c:3114) __sys_sendto (net/socket.c:2265) | ||||
| CVE-2026-52935 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: do not reuse an in-progress partial send espintcp keeps a single in-flight transmit in ctx->partial. Before building a new sk_msg, espintcp_sendmsg() first tries to flush that state through espintcp_push_msgs(). For blocking callers, espintcp_push_msgs() may return success even when the previous partial send is still pending. espintcp_sendmsg() would then reinitialize emsg->skmsg and reuse ctx->partial while the old transfer still owns that state. Do not rebuild the send message when ctx->partial is still in progress. If espintcp_push_msgs() returns with emsg->len still set, fail the new send instead of overwriting the live partial state. This is a memory-safety fix: reusing the live partial-send state can leave a stale offset attached to a new sk_msg and lead to an out-of- bounds read in the send path. tcp_sendmsg_locked() already handles waiting for send buffer memory, so the fix here is just to preserve espintcp's one-message-at-a-time transmit state. | ||||
| CVE-2026-52934 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tvlv: reject oversized TVLV packets batadv_tvlv_container_ogm_append() builds a TVLV packet section from the tvlv.container_list. The total size of this section is computed by batadv_tvlv_container_list_size(), which sums the sizes of all registered containers. The return type and accumulator in batadv_tvlv_container_list_size() were u16. If the accumulated size exceeds U16_MAX, the value wraps around, causing the subsequent allocation in batadv_tvlv_container_ogm_append() to be undersized. The memcpy-style copy that follows would then write beyond the end of the allocated buffer, corrupting kernel memory. Fix this by widening the return type of batadv_tvlv_container_list_size() to size_t. In batadv_tvlv_container_ogm_append(), check the computed length against U16_MAX before proceeding, and bail out as if the allocation had failed when the limit is exceeded. | ||||
| CVE-2026-52933 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: fix signed comparison in io_poll_get_ownership() io_poll_get_ownership() uses a signed comparison to check whether poll_refs has reached the threshold for the slowpath: if (unlikely(atomic_read(&req->poll_refs) >= IO_POLL_REF_BIAS)) atomic_read() returns int (signed). When IO_POLL_CANCEL_FLAG (BIT(31)) is set in poll_refs, the value becomes negative in signed arithmetic, so the >= 128 comparison always evaluates to false and the slowpath is never taken. Fix this by casting the atomic_read() result to unsigned int before the comparison, so that the cancel flag is treated as a large positive value and correctly triggers the slowpath. | ||||
| CVE-2026-52932 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: ipcomp: Free destination pages on acomp errors Move the out_free_req label up by a couple of lines so that the allocated dst SG list gets freed on error as well as success. | ||||
| CVE-2026-52931 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: avoid use of uninit sender vars batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it proceeds to read sender-only members that were never initialized, leading to undefined behavior. This can be triggered when a node that is currently acting as a receiver in an ongoing tp_meter session receives a malicious ACK packet. Guard against this by checking tp_vars->role immediately after the lookup and bailing out if it is not BATADV_TP_SENDER, before any of those members are accessed. | ||||
| CVE-2026-52927 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: fix OOB read in compat_mtw_from_user Luxiao Xu says: The function compat_mtw_from_user() converts ebtables extensions from 32-bit user structures to kernel native structures. However, it lacks proper validation of the user-supplied match_size/target_size. When certain extensions are processed, the kernel-side translation logic may perform memory accesses based on the extension's expected size. If the user provides a size smaller than what the extension requires, it results in an out-of-bounds read as reported by KASAN. This fix introduces a check to ensure match_size is at least as large as the extension's required compatsize. This covers matches, watchers, and targets, while maintaining compatibility with standard targets. AFAIU this is relevant for matches that need to go though match->compat_from_user() call. Those that use plain memcpy with the user-provided size are ok because the caller checks that size vs the start of the next rule entry offset (which itself is checked vs. total size copied from userspace). The ->compat_from_user() callbacks assume they can read compatsize bytes, so they need this extra check. Based on an earlier patch from Luxiao Xu. | ||||
| CVE-2026-52923 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted. | ||||
| CVE-2026-52922 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: handle forward allocation error batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb for each DHT candidate, but does not check the return value before passing it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences the skb unconditionally, so a failed allocation triggers a NULL pointer dereference. Skip forwarding to the current DHT candidate on allocation failure. | ||||
| CVE-2026-52920 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_policy: fix strict mode inbound policy matching match_policy_in() walks sec_path entries from the last transform to the first one, but strict policy matching needs to consume info->pol[] in the same forward order as the rule layout. Derive the strict-match policy position from the number of transforms already consumed so that multi-element inbound rules are matched consistently. | ||||