| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c/tw9906: Fix potential memory leak in tw9906_probe()
In one of the error paths in tw9906_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path. |
| A vulnerability was detected in Open5GS up to 2.7.7. Impacted is the function ogs_sbi_stream_find_by_id in the library /lib/sbi/nghttp2-server.c of the component NSSF. Performing a manipulation results in denial of service. Attacking locally is a requirement. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here. |
| Uncontrolled Resource Consumption vulnerability in ericmj decimal allows unauthenticated remote Denial of Service.
The decimal library does not bound the exponent on parsed input. Storing a decimal with a very large exponent (e.g. Decimal.new("1e1000000000")) is accepted without error. Subsequent calls to arithmetic functions (Decimal.add/2, Decimal.sub/2, Decimal.div/2), Decimal.to_string/2 with :normal or :xsd format, Decimal.to_integer/1, Decimal.round/3, or Decimal.compare/3 with a threshold allocate memory proportional to the exponent value, which can exhaust available memory and crash the BEAM VM.
Any application that accepts user-supplied decimal input and subsequently performs arithmetic, rounding, conversion to integer, or string formatting on it is exposed. A single malicious request is sufficient to cause an out-of-memory crash.
This issue affects decimal: from 0.1.0 before 3.0.0. |
| A vulnerability was found in Open5GS up to 2.7.7. This affects the function ogs_sbi_discovery_option_add_service_names in the library /lib/sbi/message.c of the component NSSF. The manipulation results in denial of service. The attack may be performed from remote. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix memory leak on failure path
cfg80211_inform_bss_frame() may return NULL on failure. In that case,
the allocated buffer 'buf' is not freed and the function returns early,
leading to potential memory leak.
Fix this by ensuring that 'buf' is freed on both success and failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pvrusb2: fix URB leak in pvr2_send_request_ex
When pvr2_send_request_ex() submits a write URB successfully but fails to
submit the read URB (e.g. returns -ENOMEM), it returns immediately without
waiting for the write URB to complete. Since the driver reuses the same
URB structure, a subsequent call to pvr2_send_request_ex() attempts to
submit the still-active write URB, triggering a 'URB submitted while
active' warning in usb_submit_urb().
Fix this by ensuring the write URB is unlinked and waited upon if the read
URB submission fails. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix sgtable leak on mapping failures
In an unlikely case when io_populate_area_dma() fails, which could only
happen on a PAGE_POOL_32BIT_ARCH_WITH_64BIT_DMA machine,
io_zcrx_map_area() will have an initialised and not freed table. It was
supposed to be cleaned up in the error path, but !is_mapped prevents
that. |
| In the Linux kernel, the following vulnerability has been resolved:
media: radio-keene: fix memory leak in error path
Fix a memory leak in usb_keene_probe(). The v4l2 control handler is
initialized and controls are added, but if v4l2_device_register() or
video_register_device() fails afterward, the handler was never freed,
leaking memory.
Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure
the control handler is properly freed for all error paths after it is
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fiemap page fault fix
In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode
glock. This can lead to recursive glock taking if the fiemap buffer is
memory mapped to the same inode and accessing it triggers a page fault.
Fix by disabling page faults for iomap_fiemap() and faulting in the
buffer by hand if necessary.
Fixes xfstest generic/742. |
| A flaw has been found in Open5GS up to 2.7.7. The affected element is the function nssf_nnrf_nsselection_handle_get_from_amf_or_vnssf of the file /src/nssf/nnssf-handler.c of the component NSSF. Executing a manipulation can lead to denial of service. The attack can be executed remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/atmel-hlcdc: fix memory leak from the atomic_destroy_state callback
After several commits, the slab memory increases. Some drm_crtc_commit
objects are not freed. The atomic_destroy_state callback only put the
framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function
to put all the objects that are no longer needed.
It has been seen after hours of usage of a graphics application or using
kmemleak:
unreferenced object 0xc63a6580 (size 64):
comm "egt_basic", pid 171, jiffies 4294940784
hex dump (first 32 bytes):
40 50 34 c5 01 00 00 00 ff ff ff ff 8c 65 3a c6 @P4..........e:.
8c 65 3a c6 ff ff ff ff 98 65 3a c6 98 65 3a c6 .e:......e:..e:.
backtrace (crc c25aa925):
kmemleak_alloc+0x34/0x3c
__kmalloc_cache_noprof+0x150/0x1a4
drm_atomic_helper_setup_commit+0x1e8/0x7bc
drm_atomic_helper_commit+0x3c/0x15c
drm_atomic_commit+0xc0/0xf4
drm_atomic_helper_set_config+0x84/0xb8
drm_mode_setcrtc+0x32c/0x810
drm_ioctl+0x20c/0x488
sys_ioctl+0x14c/0xc20
ret_fast_syscall+0x0/0x54 |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak
__radix_tree_create() allocates and links intermediate nodes into the
tree one by one. If a subsequent allocation fails, the already-linked
nodes remain in the tree with no corresponding leaf entry. These orphaned
internal nodes are never reclaimed because radix_tree_for_each_slot()
only visits slots containing leaf values.
The radix_tree API is deprecated in favor of xarray. As suggested by
Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead
of fixing the radix_tree itself [1]. xarray properly handles cleanup of
internal nodes — xa_destroy() frees all internal xarray nodes when the
qrtr_node is released, preventing the leak.
[1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/ |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: Fix URB memory leak on submit failure
When usb_submit_urb() fails in usbio_probe(), the previously allocated
URB is never freed, causing a memory leak.
Fix this by jumping to err_free_urb label to properly release the URB
on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
gpib: lpvo_usb: fix memory leak on disconnect
The driver iterates over the registered USB interfaces during GPIB
attach and takes a reference to their USB devices until a match is
found. These references are never released which leads to a memory leak
when devices are disconnected.
Fix the leak by dropping the unnecessary references. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Fix irq resource leak
The interrupt handler is setup but only a few lines down if
iio_trigger_register() fails the function returns without properly
releasing the handler.
Add cleanup goto to resolve resource leak.
Detected by Smatch:
drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn:
'irq' from request_threaded_irq() not released on lines: 1124. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: microchip: Fix error path in PTP IRQ setup
If request_threaded_irq() fails during the PTP message IRQ setup, the
newly created IRQ mapping is never disposed. Indeed, the
ksz_ptp_irq_setup()'s error path only frees the mappings that were
successfully set up.
Dispose the newly created mapping if the associated
request_threaded_irq() fails at setup. |
| Inefficient Algorithmic Complexity vulnerability in absinthe-graphql absinthe allows unauthenticated denial of service via quadratic fragment-name uniqueness validation.
'Elixir.Absinthe.Phase.Document.Validation.UniqueFragmentNames':run/2 iterates over all fragments and for each one calls duplicate?/2, which evaluates Enum.count(fragments, &(&1.name == name)) — a full linear scan of the fragment list. The result is O(N²) comparisons per document, where N is the number of fragment definitions supplied by the caller.
Because input.fragments is built directly from the GraphQL query body, N is fully attacker-controlled. A minimum-size fragment definition is roughly 16 bytes, so a ~1 MB document carries ~60,000 fragments and forces ~3.6 × 10⁹ comparisons inside this single validation phase. No authentication, schema knowledge, or special configuration is required.
This issue affects absinthe: from 1.2.0 before 1.10.2. |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the DNS-over-HTTPS (DoH) GET path accepts oversized dns= query parameter values and performs URL query parsing, base64 decoding, and DNS message unpacking before rejecting the request. Unlike the POST path, which applies a bounded read via http.MaxBytesReader limited to 65536 bytes, the GET path has no equivalent size validation before expensive processing. A remote, unauthenticated attacker can repeatedly send oversized DoH GET requests to force high CPU usage, large transient memory allocations, and elevated garbage-collection pressure, leading to denial of service. This issue has been fixed in version 1.14.3. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix leaks when hci_cmd_sync_queue_once fails
When hci_cmd_sync_queue_once() returns with error, the destroy callback
will not be called.
Fix leaking references / memory on these failures. |
